Introduction
The Spigen Liquid Air Case is designed to provide robust protection for your Samsung Galaxy Buds and Galaxy Buds+ charging case. Crafted from Thermoplastic Polyurethane (TPU), this case offers a muted, dark grip with a soft texture, combining serious protection with a featherlight finish. It features a minimal design with a ridged pattern for enhanced grip and shock absorption.
Key features include:
- Minimal Design: Simple matte black finish with a ridged pattern for extra edge protection.
- Soft Texture: Provides a comfortable, grip-friendly feel.
- Easy Portability & Secure Fit: Includes a carabiner for convenient carrying and double-sided tape for a snug fit.
- Precise Cutout: Ensures full access to the power level LED light, charging port, and supports wireless charging.
Image: Top and side views of the Spigen Liquid Air case in black, showcasing its design and form factor.
Setup
Follow these steps to properly install the Spigen Liquid Air Case onto your Samsung Galaxy Buds or Buds+ charging case:
- Prepare the Case: Ensure your Samsung Galaxy Buds/Buds+ charging case is clean and free of dust or debris.
- Apply Double-Sided Tape (Optional but Recommended): For a more secure fit, locate the included double-sided tape. Carefully peel off one side of the protective film and apply the tape to the inside surfaces of the Spigen case where it will contact your Buds charging case. Then, peel off the remaining protective film. This helps prevent the case from slipping.
- Insert the Bottom Half: Gently slide the bottom portion of your Galaxy Buds charging case into the bottom half of the Spigen Liquid Air Case. Ensure it is seated firmly.
- Insert the Top Half: Align the top lid of your Galaxy Buds charging case with the top half of the Spigen Liquid Air Case. Press down gently until the lid is fully enclosed and secure.
- Attach Carabiner: If desired, attach the included carabiner to the designated loop on the side of the Spigen case for easy portability.
Image: A hand carefully placing the Spigen Liquid Air case over a white Samsung Galaxy Buds charging case, demonstrating the installation process.
Operating Instructions
Using your Spigen Liquid Air Case is straightforward:
- Accessing Earbuds: To open your Galaxy Buds charging case, simply lift the lid of the Spigen case. The precise design allows for hinderless opening and easy access to your earbuds.
- Wired Charging: The case features a precise cutout at the bottom, allowing direct access to the charging port of your Galaxy Buds case. Connect your USB-C charging cable as usual.
- Wireless Charging: The Spigen Liquid Air Case is designed to be compatible with wireless charging. Simply place your cased Galaxy Buds charging case onto a compatible wireless charging pad. The precise cutout ensures the power level LED light remains visible.
- Portability: Utilize the included carabiner to securely attach your Galaxy Buds case to bags, keychains, or clothing for convenient and safe transport.
Image: The Spigen Liquid Air case is shown open, revealing the white Samsung Galaxy Buds charging case and the earbuds nestled inside, illustrating easy access.
Image: The Spigen Liquid Air case is shown with a USB-C cable plugged into the charging port, demonstrating wired charging functionality.
Image: The Spigen Liquid Air case is placed on a white wireless charging pad, with a green LED light visible, indicating active wireless charging.
Image: The Spigen Liquid Air case is shown with a black carabiner attached to its side loop, highlighting its portability feature.
Maintenance
To keep your Spigen Liquid Air Case in optimal condition:
- Cleaning: The Thermoplastic Polyurethane (TPU) material can attract dust. To clean, simply wipe the case with a damp cloth. For more thorough cleaning, you may rinse it under water and allow it to air dry completely before re-installing your Galaxy Buds case.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or harsh chemicals, as these can damage the material and finish of the case.
- Storage: When not in use, store the case in a cool, dry place away from direct sunlight to prevent material degradation.
Troubleshooting
If you encounter any issues with your Spigen Liquid Air Case, consider the following:
- Case Feels Loose: Ensure the double-sided tape (if included and applied) is properly adhered. If the tape has lost its stickiness, you may need to replace it with new double-sided adhesive for a more secure fit.
- Difficulty Opening Lid: While the case is designed for easy access, ensure the top and bottom halves of the Spigen case are correctly aligned with your Galaxy Buds charging case. If the issue persists, gently adjust the positioning.
- Charging Port Obstruction: Verify that the charging cable is fully inserted into the Galaxy Buds charging case through the precise cutout. Ensure no debris is blocking the port.
- Carabiner Missing: The product is designed to include a carabiner. If yours was not included in the packaging, please contact customer support.
Specifications
| Brand | Spigen |
| Model Number | ASD00260 |
| Colour | Liquid Air (Black) |
| Compatible Devices | Samsung Galaxy Buds, Samsung Galaxy Buds Plus |
| Form Factor | Case |
| Shell Type | Soft |
| Product Features | Anti-Slip, Carabiner, Dust Resistant, Lightweight, Shockproof |
| Enclosure Material | Thermoplastic Polyurethane (TPU) |
| Item Dimensions (L x W x H) | 8.3 x 4.3 x 2.9 Centimeters |
| Item Weight | 16 Grams |
| Box Contents | 1 Ear Buds Cover Case, 1 Carabiner |
| Country of Origin | Korea, Republic of |
Warranty and Support
Warranty Information:
This Spigen product comes with a 1 Year Warranty Against Manufacturing Defects Only from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support:
For any product-related inquiries, technical assistance, or warranty claims, please contact Spigen Customer Support:
- Email: spigen.support@spigen.com
- Importer/Packer Contact: Spigen India Pvt. Ltd., No.295-296, Ecotech-1, Extension, Greater Noida, UP
- You can also visit the official Spigen Store on Amazon for more information and products.
