ReadyWired B07YXFH8KS

ReadyWired Power Cable User Manual

Model: B07YXFH8KS

Product Overview

This manual provides instructions for the ReadyWired AC Power Cable, designed to provide reliable power connectivity for various electronic devices. This high-quality power cable is compatible with a range of computer monitors and active subwoofers, including Citronic ST5, ST8, and ST10S models.

ReadyWired AC Power Cable, black, coiled, showing a two-prong male plug on one end and a female IEC C13 connector on the other.

Figure 1: ReadyWired AC Power Cable. This image displays the black power cable coiled, with its standard two-prong male plug (NEMA 1-15P) and the female IEC C13 connector clearly visible.

Setup

The ReadyWired AC Power Cable is designed for simple plug-and-play operation. Follow these steps for proper setup:

  1. Identify the Power Input: Locate the power input port on your device (e.g., computer monitor, active subwoofer). This port is typically a three-pin receptacle designed to accept an IEC C14 connector, which mates with the C13 connector on this cable.
  2. Connect to Device: Insert the female (C13) end of the ReadyWired power cable firmly into the power input port of your device. Ensure a snug fit to prevent accidental disconnection.
  3. Connect to Power Outlet: Insert the male (NEMA 1-15P) end of the power cable into a standard, grounded AC power outlet. Ensure the outlet is easily accessible and not overloaded.
  4. Verify Connection: Once both ends are connected, ensure the cable is not kinked or pinched. Your device should now be ready to receive power.

Note: Always ensure your device is turned off before connecting or disconnecting power cables to prevent electrical surges or damage.

Operating Instructions

This power cable functions as a conduit for electrical power. There are no operational controls on the cable itself. Its operation is entirely dependent on the device it powers and the electrical outlet it is connected to.

  • Power On/Off: Use the power switch on your connected device to turn it on or off.
  • Power Source: Ensure the wall outlet provides the correct voltage and current for your device as specified by the device manufacturer.
  • Safety: Do not attempt to modify the cable or its connectors. Use only with compatible devices and power outlets.

Maintenance

The ReadyWired AC Power Cable requires minimal maintenance to ensure its longevity and safe operation.

  • Regular Inspection: Periodically inspect the cable for any signs of damage, such as cuts, fraying, exposed wires, or bent pins on the connectors.
  • Cleaning: If necessary, gently wipe the cable with a dry, soft cloth to remove dust or dirt. Do not use liquid cleaners directly on the cable or connectors.
  • Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, which can damage internal wires.
  • Avoid Stress: Do not place heavy objects on the cable or run it through high-traffic areas where it could be tripped over or damaged.

Warning: If the cable shows any signs of damage, discontinue use immediately and replace it with a new, compatible cable to prevent electrical hazards.

Troubleshooting

If you experience issues with your device not receiving power, consider the following troubleshooting steps related to the power cable:

ProblemPossible CauseSolution
Device not powering on.Cable not fully inserted.Ensure both ends of the cable are firmly seated in the device and the wall outlet.
Device not powering on.Wall outlet is not active.Test the wall outlet with another known working appliance. Check circuit breakers.
Device not powering on.Damaged power cable.Inspect the cable for visible damage. If damaged, replace the cable.
Intermittent power.Loose connection.Reseat the cable connections at both ends.

If troubleshooting steps do not resolve the issue, the problem may lie with the device itself or the power source, not the cable.

Specifications

  • Model: B07YXFH8KS
  • Brand: ReadyWired
  • Type: AC Power Cable
  • Connector Type (Male): NEMA 1-15P (2-prong, ungrounded)
  • Connector Type (Female): IEC C13
  • Length: 6 Feet (72 Inches)
  • Compatibility: Most computer monitors (Dell, Asus, HP, BenQ, Acer, LG, Samsung), Citronic ST5, ST8, ST10S Active Subwoofers.
  • Date First Available: September 29, 2016

Warranty and Support

The ReadyWired AC Power Cable comes with a 1 Year Warranty from the date of purchase.

For warranty claims or technical support, please contact the seller, River City Electronics, or ReadyWired directly through their official channels. Please have your purchase details and the product's ASIN (B07YXFH8KS) ready when contacting support.

Note: The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

© 2024 ReadyWired. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.