East West Furniture ANT-ANA-TP

East West Furniture ANT-ANA-TP Round Pedestal Dining Table Instruction Manual

Model: ANT-ANA-TP

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your East West Furniture ANT-ANA-TP Round Pedestal Dining Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

East West Furniture ANT-ANA-TP Round Pedestal Dining Table

Image 1: The East West Furniture ANT-ANA-TP Round Pedestal Dining Table in natural finish.

Package Contents

Verify that all components and hardware are present before beginning assembly. The table is shipped in two boxes.

Components:

  • 1x Table Top
  • 1x Pedestal Base
  • 1x Cross Support Structure
  • 4x Pedestal Legs

Hardware:

  • 16x Washers
  • 16x Spring Washers
  • 12x Screws
  • 4x Nuts
  • 1x Allen Wrench
  • 1x Spanner Wrench

Video 1: An animated overview of the table components and hardware included in the package, demonstrating how the parts fit together during assembly.

Assembly Instructions (Setup)

Assembly requires approximately 30 minutes and is recommended for one person. Ensure you have adequate space and a soft, clean surface to prevent scratching components.

  1. Attach Pedestal Legs to Pedestal Base: Carefully insert the four pedestal legs into the designated slots on the pedestal base. Secure each leg using the provided screws, washers, and spring washers. Tighten with the Allen wrench.
  2. Attach Cross Support Structure: Place the cross support structure onto the top of the pedestal base. Align the holes and secure it using the remaining screws, washers, and spring washers. Tighten with the Allen wrench.
  3. Attach Pedestal Assembly to Table Top: Carefully invert the table top onto a soft, clean surface. Position the assembled pedestal base and cross support structure onto the underside of the table top, aligning the pre-drilled holes. Secure the pedestal assembly to the table top using the nuts and spanner wrench. Ensure all connections are tight for stability.
  4. Final Placement: With assistance, carefully turn the assembled table upright and place it in its desired location.
Diagram showing the dimensions of the East West Furniture ANT-ANA-TP Round Pedestal Dining Table

Image 2: A technical drawing illustrating the dimensions of the dining table: 36 inches diameter and 29.5 inches height.

Operating Instructions

The East West Furniture ANT-ANA-TP Round Pedestal Dining Table is designed for residential use. It provides a stable surface for dining and other household activities.

  • Ensure the table is placed on a level surface to prevent wobbling.
  • Avoid placing excessively heavy items on the table, as the maximum weight recommendation is 300 pounds.
  • Do not stand or sit on the table.
  • Use placemats or coasters to protect the table surface from heat, moisture, and scratches.

Maintenance

Proper care will extend the life and appearance of your dining table.

  • Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the wood finish.
  • Spills: Clean spills immediately to prevent staining.
  • Protection: Use placemats, coasters, and tablecloths to protect the surface from scratches, heat, and moisture.
  • Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
  • Humidity: Maintain a consistent humidity level in your home to prevent wood from cracking or warping.
  • Tighten Hardware: Periodically check and tighten all assembly hardware to ensure the table remains stable.

Troubleshooting

ProblemPossible CauseSolution
Table wobblesUneven floor or loose hardwareEnsure the table is on a level surface. Check and tighten all assembly bolts and screws.
Scratches on surfaceContact with sharp objectsUse placemats or tablecloths. Minor scratches may be repaired with wood repair kits (consult a professional if unsure).
Discoloration or fadingProlonged exposure to direct sunlightRelocate the table away from direct sunlight or use window coverings.

Specifications

  • Brand: East West Furniture
  • Model Number: ANT-ANA-TP
  • Product Dimensions: 36"D x 36"W x 29.5"H
  • Maximum Weight Recommendation: 300 Pounds
  • Color: Natural (Ant-ana-tp)
  • Frame Material Type: Asian Hardwood (Rubber Wood)
  • Table Design: Round Pedestal
  • Seating Capacity: 2 (Unextended)
  • Assembly Required: Yes
  • Tools Recommended for Assembly: Hammer, Screw Driver (Allen wrench and spanner wrench included)
  • Indoor/Outdoor Usage: Indoor

Warranty Information

East West Furniture warrants that its merchandise is free from manufacturing defects and will either give credit or replace defective parts for a period of up to six months from the date of purchase, subject to the following conditions:

  • Within 30 Days of Purchase: For any defect, broken, cracked piece, or damage caused by transportation, customers should contact Amazon customer support.
  • After 30 Days of Purchase: If a manufacturing defect is found, the manufacturer should be notified promptly. Customers will be required to submit digital images of the defects.

Notice: The warranty is void for any of the following conditions:

  1. Improper maintenance or improper use resulting in damage.
  2. Minor color variations between the product image and your furniture.
  3. Commercial use (warranty covers residential use only).
  4. Dissatisfaction due to buyer's remorse.
  5. Normal wear and tear.
  6. Damages incurred by accidents or abuse.
  7. Damages incurred during assembling or maintenance.

Support

For further assistance or inquiries, please refer to the seller's contact information provided at the point of purchase or visit the official East West Furniture store on Amazon:

East West Furniture Amazon Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.