ROCKBROS Basic Version

ROCKBROS Full Finger Cycling Gloves Instruction Manual

Model: Basic Version

Introduction

Thank you for choosing ROCKBROS Full Finger Cycling Gloves. These gloves are designed to provide comfort, protection, and functionality for various outdoor activities, especially cycling in cooler conditions. Please read this manual carefully to ensure proper use and maintenance of your gloves.

A person wearing ROCKBROS Full Finger Cycling Gloves while riding a bicycle, demonstrating the gloves in use.

Image: ROCKBROS Full Finger Cycling Gloves in use during cycling.

Key Features

  • Reflective Design: The ROCKBROS logo on the back enhances visibility during low-light conditions, improving safety.
  • Lightweight & Warm: Weighing approximately 31g per glove, they feature an elastic fabric back and polar fleece lining, offering wind protection and warmth for autumn or early winter use.
  • Touchscreen Compatibility: Special fingertips allow interaction with smartphones and other touchscreen devices without removing the gloves.
  • Enhanced Grip: Rubber strips on all fingers provide an anti-slip effect for secure handling.
  • Shock Absorption & Breathability: Five sponge pads in the palm reduce shock, alleviate pain and fatigue, and prevent blisters. A venting hole on the palm ensures breathability to manage sweat.
  • Flexible Fit: Elastic fabric at the wrist allows for flexible hand movement, ensuring a secure grip and control.
Diagram showing features of ROCKBROS Cycling Gloves including anti-slip stripe, thickened touchscreen, air vent, 3mm SBR palm pad, extended wrist guard, reflective logo, and soft thumb towel cloth.

Image: Detailed diagram highlighting key features of the gloves.

Setup and Fitting

  1. Select Correct Size: Ensure you have chosen the correct glove size for a comfortable and secure fit. Refer to the product sizing chart if available.
  2. Donning the Gloves: Gently slide your hand into each glove, ensuring your fingers are fully seated in their respective compartments.
  3. Adjust Wrist Strap: The gloves feature an elastic fabric at the wrist for a flexible fit. If your model includes a Velcro strap, adjust it to secure the glove snugly around your wrist without being too tight, allowing for full range of motion.
Close-up of a hand adjusting the Velcro strap on a ROCKBROS cycling glove.

Image: Adjusting the wrist strap for a secure fit.

Operating Instructions

These gloves are designed for ease of use during various outdoor activities.

  • Cycling: The anti-slip rubber strips and palm padding provide a secure grip on handlebars and reduce vibrations, enhancing comfort during rides.
  • Touchscreen Use: The specially designed fingertips allow you to operate smartphones, GPS devices, and other touchscreens without removing your gloves. Use the pad of your finger for best results.
  • Visibility: The reflective ROCKBROS logo improves your visibility to others in low-light conditions, contributing to your safety.
  • Moisture Management: The thumb cloth design is useful for wiping away sweat during activity.
A hand wearing a ROCKBROS cycling glove interacting with a smartphone touchscreen.

Image: Demonstrating touchscreen functionality with the gloves.

Video: This video demonstrates the features and practical use of ROCKBROS cycling gloves, including touchscreen compatibility and overall fit.

Care and Maintenance

To ensure the longevity and performance of your ROCKBROS Cycling Gloves, follow these care instructions:

  • Washing: Hand wash only. Use mild soap and cold water. Do not use bleach or harsh detergents.
  • Drying: Do not tumble dry. Air dry away from direct sunlight or heat sources. Lay flat or hang to dry.
  • Storage: Store in a cool, dry place when not in use. Avoid prolonged exposure to extreme temperatures.
  • Avoid Ironing: Do not iron the gloves as this can damage the materials and features.

Troubleshooting

ProblemPossible CauseSolution
Touchscreen not respondingIncorrect finger placement; screen protector interference; glove material worn.Ensure you are using the designated touchscreen fingertips. Try using the pad of your finger for better contact. Check if your device's screen protector is too thick. If the glove material is worn, replacement may be necessary.
Gloves feel too coldAmbient temperature is below recommended range for these gloves; insufficient layering.These gloves are designed for autumn or early winter conditions. For colder temperatures, consider wearing liner gloves or using gloves with higher insulation.
Gloves feel too loose or too tightIncorrect size selected for your hand.Ensure you have the correct size based on the manufacturer's sizing guide. If the fit is significantly off, consider exchanging for a different size.

Product Specifications

FeatureDetail
ModelBasic Version
BrandROCKBROS
TypeFull Finger Cycling Gloves
MaterialsElastic fabric, polar fleece lining, sponge pads, rubber strips
Weight (approx.)31g per glove
Care InstructionsHand Wash Only
OriginImported

Warranty Information

ROCKBROS products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact ROCKBROS customer support. Keep your purchase receipt as proof of purchase.

Customer Support

If you have any questions, concerns, or require assistance with your ROCKBROS Full Finger Cycling Gloves, please contact ROCKBROS customer support through their official website or the retailer where the product was purchased.

For more information, visit the official ROCKBROS Store on Amazon.

© 2026 ROCKBROS. All rights reserved.