Max & Lily 180214002078
Max & Lily Low Bunk Bed, Twin-Over-Twin Bed Frame with Curtains (Model 180214002078) - Instruction Manual
Brand: Max & Lily
Model: 180214002078
Introduction
Welcome to your new Max & Lily Low Bunk Bed. This manual provides essential information for the safe assembly, use, and maintenance of your Twin-Over-Twin bunk bed with curtains. Please read all instructions carefully before assembly and retain this manual for future reference.

Image Description: A white Max & Lily Low Bunk Bed with pink play curtains attached to the bottom bunk area. A white ladder is positioned on the side, leading to the top bunk. The bed is set on a patterned rug in a room.
Important Safety Guidelines
- Always follow the weight limit and usage guidelines for the ladder.
- Adult supervision is recommended for younger children.
- This bed meets or exceeds federal safety standards for children's furniture.
- The top bunk features generous 14-inch safety guard rails.
- For best fit and safety, use with a 5-inch-thick mattress. Do not exceed a mattress thickness of 8 inches.
- Ensure all bolts are securely tightened during assembly and checked periodically.
- Do not allow children under 6 years of age to use the upper bunk.
- Periodically check and ensure that the guardrail, ladder, and other components are in their proper position and free from damage.
Package Contents
Your Max & Lily Low Bunk Bed package includes the following components:
- Solid, knot-free New Zealand pine wood bed frame components.
- Upper and lower slat rolls (plywood slats with metal support bar for top bunk).
- Angled ladder with anti-slip steps (reversible and removable).
- Removable 100% cotton play curtains (one front panel, one side panel) with hook and loop fastener strip.
- Required hardware (color-matched).
- Assembly instructions.
Note: Mattress and bedding are not included.
Setup and Assembly Instructions
Assembly is required for this bunk bed. It is recommended that 2 or more adults perform the assembly. Detailed instructions are included in your package.
- Unpack Components: Carefully unpack all parts and verify against the included parts list.
- Frame Assembly: Assemble the main bed frame using the provided hardware. Ensure all connections are secure.
- Slat Installation: Install the plywood slats for both the upper and lower sleeping surfaces. The top bunk includes a metal support bar for added stability.
- Ladder Attachment: The angled ladder can be installed on either the left or right side of the bed. Secure it firmly using the designated attachment points.
- Curtain Installation: Attach the 100% cotton play curtains to the bottom bunk area using the hook and loop fastener strips. These are designed to be easily removable.
For visual guidance, please refer to the assembly diagrams in the included instruction booklet.

Image Description: A diagram illustrating the assembled Max & Lily Low Bunk Bed, highlighting its dimensions: 50 inches tall, 81.5 inches long, 42.5 inches wide (bed only), and 54.25 inches wide (including ladder). It also shows a 31-inch underbed clearance.

Image Description: A detailed view of the bunk bed's features, including countersunk and color-matched hardware for a clean finish, its low profile suitable for younger children and low ceilings, and the angled ladder designed for easy climbing. Text overlays emphasize "100% solid New Zealand pine," "Reversible: Install ladder on either side," "400lb certified weight capacity," and "Slats included: Fits standard mattress sizes."
Usage Instructions
- Sleeping Surfaces: The bed is designed to accommodate standard twin-size mattresses. A 5-inch thick mattress is recommended for the top bunk to ensure adequate guardrail height. Do not exceed an 8-inch mattress thickness.
- Ladder Use: Always use the ladder for accessing the top bunk. Ensure children climb and descend carefully, using both hands. The ladder features anti-slip steps for safety.
- Play Area: The space under the top bunk, especially with the curtains, can be used as a play area. Ensure the area is clear of hazards.
- Weight Capacity: Each sleeping surface has a high 400-pound resting weight capacity.

Image Description: A child is shown climbing the angled ladder of the white Max & Lily Low Bunk Bed, demonstrating its use.

Image Description: A child is smiling and lying inside the play area created by the pink curtains under the Max & Lily Low Bunk Bed.
Maintenance
- Cleaning: Wipe the bed frame with a damp cloth to clean. Avoid harsh chemicals. Allow to air dry.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Curtain Care: The 100% cotton curtains can be removed for cleaning. Follow the care instructions on the curtain label.
- Wood Finish: The bed features a durable, low VOC finish. Avoid abrasive cleaners that could damage the finish.
Troubleshooting
- Loose Connections: If the bed feels wobbly, check all bolts and screws and tighten them securely.
- Squeaking Noises: Squeaking can often be resolved by tightening all hardware. Ensure slats are properly seated.
- Curtains Not Staying Attached: Ensure the hook and loop fastener strips are clean and properly aligned. Re-apply if necessary.
- Missing Parts: If any parts are missing upon arrival, contact Max & Lily customer support immediately.
Product Specifications
| Feature | Detail |
|---|---|
| Size | Twin/Twin |
| Product Dimensions | 81.5"L x 42.5"W x 50"H (excluding ladder) |
| Total Footprint (with ladder) | 81.5"L x 54.25"W x 50"H |
| Underbed Height | 33.25 inches |
| Color | White |
| Material | Solid New Zealand Pine Wood |
| Finish Type | Painted (low VOC) |
| Weight Capacity (per sleeping surface) | 400 pounds |
| Recommended Mattress Thickness | 5 inches (max 8 inches) |
| Item Weight | 113 pounds |
| Model Number | 180214002078 |
| UPC | 850799005010 |
| Assembly Required | Yes |
Official Product Videos
View this official video for additional product information and features.
Video Description: Max & Lily Low Bunk Bed overview, showcasing its features and design.
Warranty and Customer Support
Max & Lily products are designed for durability and safety. For specific warranty details, please refer to the documentation included with your purchase or visit the official Max & Lily website.
- Customer Support: For assistance with assembly, missing parts, or any other inquiries, please contact Max & Lily customer support. Contact information can typically be found on the product packaging or the brand's official website.
- Returns: This product is eligible for 90-day easy returns through Amazon.com.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.