PHILIPS UpBeat UH202 Wireless Bluetooth On Ear Stereo Headphone User Manual

1. Introduction

Welcome to your new PHILIPS UpBeat UH202 Wireless Bluetooth On Ear Stereo Headphones. These headphones are designed to deliver crisp sound and punchy bass, offering up to 15 hours of playtime on a single charge. Their lightweight design and flat-folding ear cups make them ideal for on-the-go use and easy storage. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your headphones.

Figure 1: Front view of the PHILIPS UpBeat UH202 headphones, showcasing their sleek black design.

2. Setup

2.1 Charging the Headphones

Before first use, fully charge your headphones. A full charge takes approximately 2 to 3 hours.

• Connect the supplied USB cable to the charging port on the headphones.
• Connect the other end of the USB cable to a powered USB port (e.g., computer, USB wall adapter).
• The LED indicator on the headphones will show charging status (refer to the LED indicator section in your quick start guide for specific light patterns).
• Once fully charged, disconnect the USB cable.

Figure 2: Close-up view of the right earcup, highlighting the USB charging port and control buttons.

2.2 Powering On/Off

• To power on: Press and hold the power button until the LED indicator lights up.
• To power off: Press and hold the power button until the LED indicator turns off.

2.3 Bluetooth Pairing

Pair your headphones with your Bluetooth-enabled device (e.g., smartphone, tablet, laptop).

1. Ensure the headphones are powered off.
2. Press and hold the power button for approximately 5-7 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
3. On your device, enable Bluetooth and search for new devices.
4. Select "PHILIPS UH202" from the list of available devices.
5. Once paired, the LED indicator on the headphones will turn solid blue or flash slowly.
6. If prompted for a password, enter "0000".

3. Operating the Headphones

3.1 Media Controls

The headphones feature intuitive media controls located on the earcup.

• Play/Pause: Press the multi-function button once.
• Volume Up/Down: Press the '+' or '-' buttons.
• Next Track: Press and hold the '+' button.
• Previous Track: Press and hold the '-' button.

3.2 Call Management

The built-in microphone with echo cancellation ensures clear audio during calls.

• Answer/End Call: Press the multi-function button once.
• Reject Call: Press and hold the multi-function button.
• Redial Last Number: Double-press the multi-function button.

3.3 Flat-Fold Design

The ear cups of your UH202 headphones can be folded flat and swiveled inwards for compact storage and portability.

Figure 3: The headphones shown in their flat-folded position, ready for easy storage in a bag or pocket.

4. Maintenance

4.1 Cleaning

• Wipe the headphones with a soft, damp cloth. Do not use cleaning agents containing alcohol, ammonia, benzene, or abrasives.
• Avoid getting moisture into any openings.

4.2 Storage

When not in use, store the headphones in a clean, dry place. Utilize the flat-fold design to protect the ear cups and headband during storage or transport.

4.3 Battery Care

• To preserve battery life, charge the headphones at least once every 3 months, even if not in regular use.
• Avoid exposing the battery to extreme temperatures.

5. Troubleshooting

If you encounter issues with your headphones, refer to the following common problems and solutions:

6. Specifications

7. Warranty and Support

For warranty information, technical support, or further assistance, please visit the official PHILIPS support website or refer to the warranty card included with your product.

You can also visit the Official PHILIPS Store on Amazon for product information and updates.