1. Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Five Star Outdoor Digital Amplified HDTV Antenna, Model FSA-3806. This antenna is designed to receive digital HDTV signals, including 1080P and 4K Ultra HD, as well as FM radio. It features a 360-degree motorized rotation for optimal signal reception and an amplified design to enhance signal strength up to a 200-mile range. The built-in LTE filter helps reduce interference from 4G phone signals, ensuring clear digital TV reception.
2. Package Contents
The Standard Kit includes the following components:
- Antenna (Base Element, Director Element, Reflector Panels)
- Control Box
- Remote Control
- Power Supply (UL Approved AC Adapter)
- 40ft RG6 Coaxial Cable
- 4-Way Coaxial Splitter
- 15 Cable Clips
- Installation Kit (screws, wingnuts, brackets)
- Instruction Manual
The mounting pole is not included in this package.
3. Assembly and Initial Setup
Follow these steps to assemble your antenna. Refer to the included instruction manual for detailed diagrams.
- Unfold Base Element: Carefully unfold the base element of the antenna. Ensure all hinged parts lock securely into place.
- Attach Director Element: Connect the director element to the base element using the provided screws and wingnuts. Ensure a firm connection.
- Install Reflector Panels: Secure the two reflector panels to the antenna frame using the designated mounting points, screws, and wingnuts.
- Connect VHF Enhancement Rod: Attach the VHF reception enhancement rod to its designated position on the antenna.
For a visual guide on unboxing and assembly, please watch the official seller video below:
4. Installation
Proper installation is crucial for optimal performance. Choose a mounting location that is as high as possible and free from obstructions (e.g., trees, buildings) to maximize signal reception. Common locations include rooftops, chimneys, or a dedicated antenna mast.
- Mounting the Antenna: Securely attach the assembled antenna to a sturdy pole (not included) using the provided mounting brackets, screws, and wingnuts. Ensure the antenna is level and firmly attached to withstand weather conditions.
- Connecting Coaxial Cable: Connect one end of the 40ft RG6 coaxial cable to the antenna's F-connector. Ensure the connection is tight and waterproof.
- Connecting to Control Box: Route the coaxial cable to the indoor control box. Connect the other end of the coaxial cable to the 'ANT IN' port on the control box.
- Powering the Control Box: Plug the UL-approved AC adapter into the control box and then into a standard 110-120V AC outlet. The power indicator light on the control box should illuminate.
- Connecting to TV(s): Connect a short coaxial cable (not included) from the 'TV1' or 'TV2' output on the control box to the 'ANT IN' or 'CABLE IN' port on your television. If connecting multiple TVs, use the provided 4-way coaxial splitter. Connect the control box output to the splitter's input, and then connect each TV to an output port on the splitter.
5. Operating Instructions
Once the antenna is installed and connected, you can begin receiving digital TV and FM radio signals.
- Scanning for Channels: Access your TV's menu and navigate to the 'Channel Setup' or 'Auto Program' section. Select 'Antenna' or 'Air' as the input source, then initiate a channel scan. This process may take several minutes.
- Using the Remote Control: The included remote control allows you to rotate the antenna 360 degrees. Press the rotation buttons on the remote to adjust the antenna's direction. Observe your TV screen for signal strength and picture quality while rotating to find the optimal direction for your desired channels.
For a demonstration of channel scanning and reception, please watch the official seller video below:
6. Maintenance
To ensure the longevity and optimal performance of your Five Star antenna, consider the following maintenance tips:
- Regular Inspection: Periodically check the antenna, mounting hardware, and cables for any signs of wear, damage, or loose connections, especially after severe weather.
- Cleaning: Gently clean the antenna elements with a soft cloth to remove dirt, dust, or debris that may accumulate and affect signal reception. Avoid using harsh chemicals.
- Cable Integrity: Ensure coaxial cables are not kinked, frayed, or exposed to excessive moisture. Replace damaged cables promptly.
7. Troubleshooting
If you experience issues with your antenna, try the following solutions:
- No Signal or Poor Picture Quality:
- Check all cable connections to ensure they are secure.
- Verify the control box is powered on and its indicator light is active.
- Use the remote control to slowly rotate the antenna 360 degrees, pausing at different directions to allow your TV to register potential signals.
- Perform a new channel scan on your TV after adjusting the antenna's direction.
- Ensure the antenna is mounted as high as possible and free from obstructions.
- Remote Control Not Working:
- Check the batteries in the remote control and replace them if necessary.
- Ensure there are no obstructions between the remote and the control box.
- Verify the control box is receiving power.
- Interference from 4G/5G Signals: The antenna has a built-in LTE filter. If interference persists, ensure the antenna is correctly positioned and all connections are tight.
8. Specifications
| Product Dimensions | 17 x 8 x 7 inches |
| Item Weight | 4.77 pounds |
| Manufacturer | Five Star |
| Impedance | 75 Ohms |
| Maximum Range | 200 Miles |
| Number of Channels | 100 |
| Supported Formats | HDTV 4K, 1080P, 1080i, 720P Broadcast |
| Frequency Bands | FM, VHF, UHF |
9. Warranty and Support
The Five Star Outdoor Digital Amplified HDTV Antenna comes with a 1-year limited warranty. For warranty claims, technical support, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Five Star website.
