1. Introduction
The Five Star Outdoor Digital Amplified HDTV Antenna is designed to provide high-quality digital television reception for both VHF and UHF bands. This antenna features a built-in amplifier with intelligent gain control, an LTE filter to reduce interference from mobile signals, and a 360-degree motorized rotation for optimal signal acquisition. It supports HD, 4K, and FM radio reception, allowing access to a wide range of free over-the-air channels.
For best performance, the antenna should be installed in an elevated outdoor location, such as on a roof or mast, with a clear line of sight to broadcast towers. The motorized rotation feature, controlled by a remote, allows for precise aiming to maximize channel reception.
2. Package Contents
Verify that all items listed below are included in your package:
- Antenna Unit (pre-assembled base element, director elements, and reflector panels)
- Control Box
- Remote Control (AAA batteries not included)
- UL-Listed Power Supply for Control Box
- 40ft RG6 Coaxial Cable
- Mounting Hardware (screws, wingnuts, brackets)
- Instruction Manual
Image: Antenna unit, control box, and remote control.
Image: Included 40ft RG6 coaxial cable.
3. Setup and Assembly
The antenna unit comes partially pre-assembled. Follow these steps to complete the assembly:
- Unfold Receiving Elements: Carefully unfold the receiving elements on the base element until they lock into place.
- Unfold Director Elements: Extend the director elements from the main boom until they are fully open.
- Attach Reflector Panels: Secure the two reflector panels to the rear of the antenna using the provided screws and wingnuts. Ensure they are firmly attached.
- Connect VHF Enhancement Rod (if included): If your model includes a VHF enhancement rod, attach it to the designated point on the antenna using the provided hardware.
Image: Fully assembled antenna unit.
Image: The antenna's motorized base allows for 360-degree rotation.
Video: An overview of the Five Star Outdoor HD TV Antenna, highlighting its features and range. This video demonstrates the antenna's design and capabilities.
4. Installation
Proper installation is crucial for optimal signal reception. A mounting pole is required (not included).
- Choose a Mounting Location: Select an outdoor location, such as a roof, attic, or mast, that provides the clearest line of sight to local broadcast towers. Higher locations generally yield better reception.
- Mount the Antenna: Securely attach the antenna to a sturdy mounting pole using the provided brackets and hardware. Ensure the antenna is level and stable.
- Connect Coaxial Cable: Connect one end of the 40ft RG6 coaxial cable to the antenna's output port. Run the cable neatly and securely to your indoor control box location, avoiding sharp bends or kinks.
- Connect to Control Box: Connect the other end of the coaxial cable to the "ANT IN" port on the control box.
- Connect to TV: Connect a separate coaxial cable (not included) from the "TV1" or "TV2" output on the control box to the antenna input on your television.
- Power the Control Box: Plug the UL-listed power supply into the control box and then into a standard electrical outlet. The power indicator light on the control box should illuminate.
Image: Example of antenna installation on a residential roof.
Image: The antenna provides clear reception for television viewing.
Image: Connection diagram showing antenna, control box, and TV connections.
5. Operating Instructions
Once the antenna is installed and connected, follow these steps to receive channels:
- Set TV Input: On your television, select the correct input source (e.g., "Antenna" or "Air").
- Perform Channel Scan: Access your TV's menu and navigate to the "Channel Setup" or "Auto Program" section. Select "Antenna" or "Air" as the signal source and initiate a channel scan. This process may take several minutes.
- Optimize Antenna Direction: Use the remote control to rotate the antenna 360 degrees. While scanning or after the scan is complete, observe the signal strength and picture quality for different channels. Adjust the antenna direction using the remote until you achieve the best possible reception for your desired channels.
- Utilize FCC DTV Maps: For assistance in identifying the direction of local broadcast towers, visit the FCC's DTV Reception Maps website (fcc.gov/media/engineering/dtv-maps). Enter your address to find nearby towers and aim your antenna accordingly.
Image: Television menu displaying options for channel scanning, including 'Antenna' and 'Air' selections.
Image: Visual guide for connecting the TV, scanning channels, and watching television.
Image: Using FCC DTV Reception Maps to locate nearby broadcast towers for optimal antenna positioning.
6. Maintenance
To ensure the longevity and optimal performance of your Five Star antenna, consider the following maintenance tips:
- Regular Inspection: Periodically inspect the antenna, mounting hardware, and coaxial cable for any signs of wear, damage, or corrosion.
- Cleaning: Gently clean the antenna elements with a soft, damp cloth to remove dirt, dust, or debris that may accumulate over time. Avoid using harsh chemicals or abrasive materials.
- Cable Management: Ensure all cables are securely fastened and protected from environmental elements to prevent damage.
7. Troubleshooting
If you experience issues with your antenna, try the following troubleshooting steps:
- No Signal or Poor Picture Quality:
- Verify all cable connections are secure between the antenna, control box, and TV.
- Ensure the control box power supply is properly connected and the power indicator light is on.
- Perform a new channel scan on your TV.
- Adjust the antenna's direction using the remote control to find the optimal signal.
- Check the antenna's mounting location for any new obstructions (e.g., trees, buildings).
- Remote Control Not Working:
- Replace the AAA batteries in the remote control.
- Ensure there are no obstructions between the remote and the control box.
- Limited Channels:
- Re-scan for channels after adjusting the antenna direction.
- Consider relocating the antenna to a higher or less obstructed position.
- Consult the FCC DTV Reception Maps to confirm local broadcast availability and direction.
8. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 17 x 8 x 7 inches |
| Item Weight | 4.6 pounds |
| Brand | Five Star |
| Number of Channels | Up to 100 |
| Impedance | 75 Ohms |
| Maximum Range | 200 Miles |
| Reception Bands | VHF, UHF, FM |
| Rotation | 360 Degree Motorized |
| Special Features | Amplified, LTE Filter, Intelligent Gain Control |
9. Warranty and Support
This Five Star antenna includes a 1-year limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided in your product packaging or visit the official Five Star website.
