Dual XRM59BT Single-DIN In-Dash All-Digital Media Receiver with Bluetooth User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dual XRM59BT Single-DIN In-Dash All-Digital Media Receiver. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

2. Safety Information

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

• Always operate the vehicle safely. Do not operate the receiver in a manner that distracts you from safe driving.
• Ensure proper wiring connections to prevent electrical shorts or damage.
• Consult a professional for installation if you are unsure about any steps.

3. Package Contents

Verify that all items are present before installation:

• Dual XRM59BT Media Receiver Unit
• Wiring Harness
• Mounting Hardware (sleeves, keys)
• User Manual (this document)

Image 3.1: Included wiring harness and mounting keys. The wiring harness connects the receiver to the vehicle's power and speakers, while the keys are used for unit removal.

4. Product Overview

4.1 Front Panel Controls

Image 4.1: Front view of the Dual XRM59BT receiver, showing the display, control knob, USB port, AUX input, and various buttons.

• Power/Mode Button: Turns the unit on/off and switches between sources (Radio, Bluetooth, USB, AUX).
• Volume Knob: Adjusts audio output level. Press to access audio menu settings (Bass, Treble, Balance, Fader, EQ).
• Display: Shows current status, track information, radio frequency, and time.
• USB Port: Connect USB devices for media playback and charging (1 Amp).
• AUX Input (3.5mm): Connect external audio devices.
• Microphone (MIC): For hands-free calling.
• Band/Display Button: Switches radio bands (FM1, FM2, FM3, AM1, AM2) and changes display information.
• Seek/Track Buttons: Skips tracks or seeks radio stations.
• Voice Activation Button: Activates your paired smartphone's voice assistant (Siri or Google Assistant).

4.2 Rear Panel Connections

Image 4.2: Rear view of the Dual XRM59BT receiver, showing the antenna input, RCA outputs, and the main wiring harness connector.

• Antenna Input: Connects to your vehicle's radio antenna.
• RCA Outputs (L-CH, R-CH): For connecting to external amplifiers.
• Wiring Harness Connector: Connects to the included wiring harness for power, ground, and speaker connections.

5. Installation

The XRM59BT features a shallow mount design for easier installation in various vehicle dashboards. Proper installation is crucial for optimal performance and safety. If you are unsure about any steps, consult a qualified car audio technician.

5.1 Wiring Diagram

Refer to the wiring diagram provided with your unit or on the included wiring harness for specific connections. Common connections include:

• Yellow: Constant 12V (Battery)
• Red: Switched 12V (Accessory)
• Black: Ground
• Blue: Remote Turn-On (for amplifier)
• Speaker Wires: Typically color-coded for front left, front right, rear left, rear right (e.g., White/White-Black, Gray/Gray-Black, Green/Green-Black, Purple/Purple-Black).

5.2 Mounting the Unit

1. Remove the existing head unit from your vehicle's dashboard.
2. Install the metal mounting sleeve into the dashboard opening. Bend the tabs to secure it.
3. Connect the wiring harness from the XRM59BT to your vehicle's wiring, ensuring all connections are secure and insulated.
4. Slide the XRM59BT unit into the mounting sleeve until it clicks into place.
5. Attach the trim ring (if applicable).

6. Initial Setup

6.1 Powering On and Basic Settings

• Press the Power/Mode button to turn on the unit.
• Adjust the volume using the Volume Knob.
• To set the clock, press and hold the Band/Display button until the clock flashes, then use the seek buttons to adjust hours and minutes. Press Band/Display again to confirm.

6.2 Bluetooth Pairing

1. Ensure Bluetooth is enabled on your mobile device.
2. On the XRM59BT, select the Bluetooth source by pressing the Mode button until "BT AUDIO" or "BT PHONE" appears.
3. On your mobile device, search for Bluetooth devices and select "XRM59BT".
4. Once paired, the unit will display "PAIRED" or a similar confirmation.

6.3 iPlug Smart Remote App

The Dual XRM59BT is compatible with the Dual iPlug Smart Remote app. Download the app from your smartphone's app store (iOS or Android). This app allows you to control most primary functions of the receiver directly from your phone after pairing via Bluetooth.

7. Operating Instructions

7.1 Radio Operation

• Press Mode to select FM or AM radio.
• Press Band/Display to switch between FM1, FM2, FM3, AM1, AM2 bands.
• Use the Seek buttons (<< / >>) to automatically search for strong stations.
• To manually tune, press and hold the Seek buttons.
• To store a station preset, tune to the desired station, then press and hold one of the numeric preset buttons (1-6) until you hear a beep.

7.2 Bluetooth Audio Streaming and Hands-Free Calling

• Once paired, select "BT AUDIO" via the Mode button to stream music from your device.
• Use the Track buttons (<< / >>) to skip tracks.
• Press the Volume Knob to pause/play.
• For hands-free calling, when a call comes in, press the Volume Knob to answer. Press again to end the call.
• Use the built-in microphone for conversations.

7.3 USB Playback

• Insert a USB flash drive into the front USB port. The unit will automatically switch to USB mode and begin playback.
• Use the Track buttons (<< / >>) to navigate tracks.
• Press the Volume Knob to pause/play.

7.4 Auxiliary Input (AUX)

• Connect an external audio device (e.g., MP3 player) to the front 3.5mm AUX input using an audio cable.
• Press the Mode button to select "AUX IN".
• Control playback from the connected device.

7.5 Voice Activation

• Press the dedicated Voice Activation button to access your paired smartphone's voice assistant (Siri or Google Assistant).
• Speak commands through the unit's microphone.

7.6 Equalizer (EQ) Settings

• Press the Volume Knob to enter the audio menu.
• Rotate the Volume Knob to cycle through settings like BASS, TREBLE, BALANCE, FADER, and EQ.
• When EQ is selected, rotate the knob to choose from preset EQ curves (e.g., FLAT, CLASS, POP, ROCK) or a custom setting.

8. Maintenance

8.1 Cleaning the Unit

• Use a soft, dry cloth to wipe the front panel.
• Do not use abrasive cleaners, waxes, or solvents.
• Avoid spraying liquid cleaners directly onto the unit.

8.2 Fuse Replacement

If the unit does not power on, check the fuse located on the wiring harness. Replace it with a fuse of the same amperage rating (e.g., 10A). Using an incorrect fuse can cause damage or fire.

9. Troubleshooting

10. Specifications

11. Warranty and Support

For warranty information, please refer to the separate warranty card included with your product or visit the Dual Electronics official website. For technical support, product registration, or to purchase accessories, please visit www.dualav.com or contact Dual Electronics customer service.

Dual Electronics Customer Service:

• Website: www.dualav.com
• Phone: (Refer to official website for current contact numbers)