Oxelo Fit 3 Kid's Fitness Skates User Manual

1. Introduction

Thank you for choosing Oxelo Fit 3 Kid's Fitness Skates. These skates are designed for children and are adjustable to four different sizes, accommodating foot sizes from UK 10.5C to UK 5 (EU 32 to EU 35). They are suitable for recreational skating over several kilometers, offering comfort, ventilation, and a secure fit for young skaters.

This manual provides essential information for the safe and effective use, setup, maintenance, and troubleshooting of your Oxelo Fit 3 skates. Please read it thoroughly before use and retain it for future reference.

2. Safety Information

• Always wear appropriate protective gear, including a helmet, knee pads, elbow pads, and wrist guards, when using these skates.
• Ensure all buckles and straps are securely fastened before skating.
• Skate in safe, designated areas away from traffic, pedestrians, and uneven surfaces.
• Children should always be supervised by an adult while skating.
• Regularly inspect skates for wear and tear, especially wheels, bearings, and fastening systems. Do not use if any part is damaged.
• Avoid skating in wet conditions, on sand, or on gravel, as this can reduce control and damage components.

3. Setup and Adjustment

3.1 Size Adjustment

The Oxelo Fit 3 skates feature an adjustable sizing system to accommodate growing feet. To adjust the size:

1. Locate the adjustment mechanism, typically a button or lever, on the side or front of the skate.
2. Press and hold the adjustment button.
3. Slide the front part of the boot forward or backward to the desired size marking.
4. Release the button to lock the size in place. Ensure it clicks securely.
5. Repeat for the other skate.

The skate should fit snugly but comfortably, allowing for proper foot support without being too tight.

Image 1: Oxelo Fit 3 Kid's Fitness Skates. This image illustrates the overall design, including the adjustable boot and the triple fastening system.

3.2 Fastening the Skates

The skates are equipped with a triple fastening system to ensure your foot is held securely in place:

1. Laces: Tighten the laces evenly across the foot for initial snugness.
2. Velcro Strap: Secure the Velcro strap over the instep to further hold the foot down.
3. Buckle: Fasten the top buckle around the ankle. Adjust the strap tension until the ankle is firmly supported without restricting circulation.

Ensure all three fastening elements are secure before beginning to skate.

4. Operating the Skates

The Oxelo Fit 3 skates are designed for fitness skating. The composite plate and ABEC 3 bearings provide a smooth and enjoyable ride. The semi-stiff boot with foam padding offers comfort and ventilation during use.

• Always start on a flat, smooth surface to practice balance and basic movements.
• Maintain a slightly bent knee posture for better balance and shock absorption.
• Learn to stop effectively before attempting higher speeds or more complex maneuvers.

5. Maintenance

Proper maintenance will extend the life and performance of your skates.

5.1 Cleaning

• Wipe down the exterior of the boots with a damp cloth after each use to remove dirt and dust.
• For the foam lining, allow the skates to air dry completely after use to prevent odor and mildew. Do not machine wash.

5.2 Wheel and Bearing Care

• Regularly check the wheels for wear. Rotate wheels periodically to ensure even wear and prolong their lifespan.
• Inspect the ABEC 3 bearings for smooth rotation. If bearings become noisy or stiff, they may need cleaning or replacement. Consult a specialist for bearing maintenance.
• Ensure all wheel axles are tightened securely.

5.3 General Inspection

• Check the composite plate for any cracks or damage.
• Examine the buckles, straps, and laces for fraying or damage. Replace any worn components immediately.
• Store skates in a dry, cool place away from direct sunlight.

6. Troubleshooting

• Skates feel loose: Ensure the size adjustment is correct and all three fastening systems (laces, Velcro strap, buckle) are tightened securely.
• Wheels not spinning freely: Check for debris lodged in the bearings or between the wheel and frame. Bearings may need cleaning or replacement if they are worn or corroded.
• Discomfort during use: Re-check the size adjustment and fastening. Ensure socks are appropriate for skating. If discomfort persists, consult a specialist.
• Skates pulling to one side: Inspect wheels for uneven wear or damage. Rotate or replace wheels as necessary.

7. Specifications

8. Warranty

The Oxelo Fit 3 Kid's Fitness Skates come with a 2-Year Warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims. For specific terms and conditions, refer to the warranty information provided at the point of purchase or contact Oxelo customer support.

9. Support

For further assistance, spare parts, or detailed inquiries regarding your Oxelo Fit 3 skates, please contact your local Oxelo retailer or visit the official Oxelo website for customer support information.