Rema TIP TOP Innerliner Sealer 175g + Brush Instruction Manual

1. Product Overview

The Rema TIP TOP Innerliner Sealer is a specialized product designed for sealing tire repair patches and other related applications. This 175g metal can of sealer comes with a practical brush for easy application. Manufactured by Rema TIP TOP in Germany, it ensures high quality and reliability for professional and DIY tire repairs.

Image: Rema TIP TOP Innerliner Sealer 175g can with a brush. The can is white with red and black text, indicating 'CEMENT INNERLINER SEALER' and '175 g / 210 ml'. The brush has a metal handle and natural bristles, designed for precise application.

Key Features:

• Water-resistant: Provides a durable seal against moisture.
• Temperature-resistant: Maintains integrity in temperatures ranging from -30 °C to +120 °C.
• Self-vulcanizing: Forms a strong, permanent bond without external heat.
• Color: Black, blends seamlessly with tire interiors.
• Convenient packaging: Supplied in a 175g metal can with an integrated brush for easy application.

2. Safety Information

Always read and understand all safety warnings and instructions before using this product. Failure to do so may result in injury or damage.

• Ventilation: Use in a well-ventilated area to avoid inhalation of fumes.
• Personal Protective Equipment (PPE): Wear appropriate gloves and eye protection (safety glasses or goggles) to prevent skin and eye contact.
• Flammability: Keep away from open flames, sparks, and other ignition sources. The product may contain flammable solvents.
• Storage: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep container tightly closed when not in use.
• Disposal: Dispose of product and packaging in accordance with local regulations.
• First Aid: In case of contact with skin, wash thoroughly with soap and water. In case of eye contact, rinse immediately with plenty of water for several minutes and seek medical attention. If inhaled, move to fresh air. If swallowed, do not induce vomiting; seek medical attention immediately.
• Keep out of reach of children and pets.

3. Setup and Preparation

Proper preparation is crucial for effective sealing and adhesion.

1. Clean the Surface: Ensure the tire's innerliner surface around the repair area is thoroughly cleaned and free from dirt, grease, moisture, and any loose particles. Use a suitable tire cleaning solution if necessary, and allow it to dry completely.
2. Roughen the Surface: Lightly buff or roughen the area where the sealer will be applied using a suitable abrasive tool (e.g., a wire brush or buffing tool). This creates a better bonding surface. Remove any dust created by buffing.
3. Open the Can: Carefully open the metal can of Rema TIP TOP Innerliner Sealer. The brush is typically integrated into the lid or provided separately.
4. Stir (if necessary): If the product has been stored for a long time, gently stir the contents to ensure a consistent consistency.

4. Operating Instructions

Follow these steps for optimal application of the Innerliner Sealer.

1. Apply a Thin, Even Coat: Dip the brush into the sealer and apply a thin, even layer over the entire surface of the tire repair patch and the surrounding buffed area of the innerliner. Ensure complete coverage, especially around the edges of the patch.
2. Avoid Excess: Do not apply an excessively thick layer, as this can prolong drying time and may not improve adhesion. A thin, uniform coat is sufficient.
3. Drying Time: Allow the sealer to dry completely. Drying time can vary depending on ambient temperature, humidity, and the thickness of the applied layer. Typically, it will be touch-dry within 15-30 minutes at room temperature (around 20-25°C / 68-77°F). The sealer is self-vulcanizing, meaning it cures without external heat.
4. Inspect: Once dry, the sealed area should appear uniformly black and slightly tacky. Inspect for any missed spots or areas requiring additional sealing.
5. Re-application (if needed): If a second coat is deemed necessary for enhanced sealing (e.g., for larger repairs or specific applications), ensure the first coat is fully dry before applying the second.

5. Maintenance

Proper care and storage will extend the life of your product.

• Cleaning the Brush: After each use, clean the brush thoroughly with a suitable solvent (e.g., mineral spirits or a dedicated brush cleaner) before the sealer dries on it. This will keep the bristles soft and ready for future use.
• Storing the Sealer: Tightly close the can immediately after use to prevent the sealer from drying out or evaporating. Store the can upright in a cool, dry place, away from direct sunlight and extreme temperatures.
• Shelf Life: Check the product packaging for specific shelf life recommendations. Properly stored, the sealer maintains its effectiveness for an extended period.

6. Troubleshooting

Common issues and their potential solutions.

7. Specifications

8. Warranty and Support

For any questions regarding the Rema TIP TOP Innerliner Sealer, please contact the manufacturer or your authorized dealer. Keep your purchase receipt for any warranty claims.

Manufacturer: Rema TIP TOP

Refer to the official Rema TIP TOP website or product packaging for the most up-to-date warranty information and customer support contacts.