LA Ornamental Range Extender & Transmitter Kit User Manual

Product Overview

The LA Ornamental Range Extender and Transmitter Kit (Models XRE-100 and TX-100) is designed to significantly increase the operational range of your gate opener remote controls and transmitters. This system enhances signal reception and transmission, allowing for extended control over your gate system.

Image: Complete kit including two extender units and one transmitter remote.

Key Features

• XRE-100 Extender:
  • 2 relay inputs and 2 relay outputs for versatile integration.
  • Battery backup capability ensures continuous operation.
  • Automatic synchronization every 30 seconds maintains signal integrity.
  • Field pairable for easy setup.
• TX-100 Transmitter:
  • Micro-USB rechargeable for convenience.
  • LED notification for transmit and receive verification.
  • Low battery LED indicator.
  • Adjustable transmit power.
• Enhanced Range: Extends frequency range up to 20 times, providing approximately 1/2 mile range through obstructions.
• Security: Features AES security encryption for reliable and secure communication.
• Compatibility: Designed for use with existing gate opener remote controls and transmitters.

Package Contents

The package includes the following components:

• Two (2) XRE-100 Relay Extender Units
• One (1) TX-100 Transmitter Remote

Image: The TX-100 transmitter remote and an XRE-100 extender unit, accompanied by the product manual.

Setup and Installation

This section provides general guidelines for setting up your Range Extender and Transmitter Kit. For detailed wiring diagrams and specific installation instructions, refer to the included physical manual or consult a qualified technician.

XRE-100 Relay Extender Installation

1. Mounting: Choose a suitable location for the XRE-100 extender unit. It should be within range of your existing gate opener and in a location that minimizes physical obstructions to the signal path. The unit is designed for both indoor and outdoor use, with a robust casing.
   

   Image: A single XRE-100 Relay Extender unit, showing its external casing and antenna.

2. Power Connection: Connect the XRE-100 to a 12-24 Volt AC/DC power source. Ensure the power supply meets the specifications to prevent damage.
   

   Image: Internal view of the XRE-100 Relay Extender, showing the circuit board and connection terminals.

3. Relay Connections: Utilize the 2 relay inputs and 2 relay outputs to integrate the extender with your gate opener system. These connections allow the extender to receive signals from your existing remote system and transmit commands to the gate opener. Refer to your gate opener's manual for specific wiring requirements.
4. Antenna Placement: Ensure the antenna is positioned vertically and unobstructed for optimal signal reception and transmission.

TX-100 Transmitter Setup

1. Charging: Before first use, fully charge the TX-100 transmitter using a Micro-USB cable. The LED indicator will show charging status.
2. Pairing: The TX-100 transmitter and XRE-100 extenders are designed to be field pairable. Follow the pairing instructions provided in the detailed manual to link the transmitter with your extender units. This typically involves pressing a pairing button on the extender and then activating the transmitter.
3. Adjusting Transmit Power: The TX-100 allows for adjustable transmit power. Consult the manual for instructions on how to adjust this setting to optimize range and battery life for your specific environment.

Operating Instructions

Once installed and paired, operating the system is straightforward.

1. Activating the System: Use your existing gate opener remote control as you normally would. The XRE-100 extender will receive the signal, amplify it, and re-transmit it to your gate opener.
2. Using the TX-100 Transmitter: Press the button on the TX-100 transmitter to send a signal. The LED notification will illuminate to confirm transmission. This signal will be received by the XRE-100 extender, which then activates the gate opener.
3. Signal Verification: Observe the LED indicators on both the TX-100 (for transmit/receive verification) and the XRE-100 (if applicable, for signal reception) to confirm successful communication.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your LA Ornamental Range Extender and Transmitter Kit.

• Cleaning: Periodically clean the exterior of the XRE-100 extender and TX-100 transmitter with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Battery Check (TX-100): Monitor the low battery LED indicator on the TX-100 transmitter. Recharge the unit promptly when the indicator illuminates to ensure consistent performance.
• Environmental Conditions: While designed for a wide temperature range (-40°F to 185°F / -40°C to 85°C), ensure the units are not exposed to extreme moisture or direct prolonged sunlight beyond their operational limits.
• Connection Integrity: Periodically inspect all wiring connections to the XRE-100 extender to ensure they are secure and free from corrosion.

Troubleshooting

If you encounter issues with your Range Extender and Transmitter Kit, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact LA Ornamental customer support.

Specifications

XRE-100 Relay Extender

• Power Input: 12-24 Volt AC/DC
• Relays: 10A 250 VAC / 28VDC
• Current Consumption:
  • 12V: 50mA (idle), 1A (transmit)
  • 24V: 25mA (idle), 500mA (transmit)
• Range: Approximately 1/2 mile (through obstructions)
• Temperature Range: -40°F to 185°F (-40°C to 85°C)
• Security Encryption: AES
• Wireless Communication Standard: 900 MHz Radio Frequency

TX-100 Transmitter

• Power: Micro-USB Rechargeable
• Dimensions: 2-3/8” x 3-1/2” x 3/4”
• Range: Approximately 1/2 mile (through obstructions)
• Temperature Range: -40°F to 185°F (-40°C to 85°C)
• Security Encryption: AES

Note: The product also supports 2.4 GHz and 5 GHz frequency bands for broader compatibility, as indicated in some specifications.

Warranty Information

LA Ornamental products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official LA Ornamental website. Typically, warranty covers defects in materials and workmanship under normal use.

Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact LA Ornamental customer support.

• Manufacturer: LA Ornamental
• Model Numbers: XRE-100, TX-100
• Date First Available: September 11, 2019
• Please have your product model number and date of purchase ready when contacting support.