Introduction
This manual provides essential information for the proper use and care of your Genuine Sharp Convection Microwave Turntable Tray. This original replacement part is designed for specific Sharp convection microwave models to ensure optimal performance. Please read this manual thoroughly before installation and use.
Product Overview
The Sharp Convection Microwave Turntable Tray is a circular metal tray with a durable coating, designed to rotate food evenly during microwave and convection cooking cycles. It is an authentic replacement part for compatible Sharp microwave ovens.
Image 1: Genuine Sharp Convection Microwave Turntable Tray. This image shows the circular, dark gray/black metal tray with a speckled finish, designed for even cooking in compatible Sharp microwave ovens.
Compatibility:
This turntable tray is specifically designed for the following Sharp Convection Microwave models:
- R9H73
- R-9H73
- R9H76
- R-9H76
- R9H80
- R-9H80
If your microwave model is not listed, please contact customer support to verify compatibility before purchase.
Setup and Installation
This section outlines the general procedure for installing the turntable tray. Please note that detailed installation instructions specific to your microwave model are typically provided in your microwave oven's user manual. This part does not come with separate installation instructions.
- Unpack: Carefully remove the turntable tray from its packaging. Inspect for any damage.
- Clean: Before first use, wash the turntable tray with warm, soapy water and dry thoroughly.
- Position: Place the turntable tray onto the rotating support ring (if applicable) and the central coupler within your microwave oven. Ensure it sits securely and can rotate freely.
- Verify: Close the microwave door and perform a brief test run (e.g., 30 seconds with a cup of water) to confirm the tray rotates smoothly.
Important: Ensure the turntable tray is correctly seated before operating the microwave to prevent damage to the appliance or the tray.
Operating Instructions
The turntable tray is an integral part of your convection microwave's cooking system, facilitating even heating and cooking. No specific operation is required for the tray itself beyond proper placement.
- Always place food containers directly on the turntable tray.
- Ensure the tray is clean and free of debris before each use to maintain smooth rotation.
- Do not operate the microwave without the turntable tray in place, unless specifically instructed by your microwave oven's manual for certain functions.
Maintenance and Care
Proper maintenance will extend the life of your turntable tray and ensure hygienic operation.
- Cleaning: Wash the tray regularly with warm, soapy water. For stubborn food residues, a non-abrasive sponge or cloth can be used. Rinse thoroughly and dry completely.
- Dishwasher Safety: Refer to your microwave oven's manual or the tray's original packaging for specific dishwasher safety instructions. Generally, metal trays with coatings may be hand-washed to preserve the finish.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or metal utensils on the tray, as these can damage the coating.
- Inspection: Periodically inspect the tray for any signs of damage, such as chips in the coating or warping. A damaged tray should be replaced to prevent uneven cooking or potential hazards.
Troubleshooting
Most issues related to the turntable tray are simple to resolve.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tray does not rotate |
|
|
| Tray makes unusual noise |
|
|
Specifications
| Attribute | Detail |
|---|---|
| Product Type | Convection Microwave Turntable Tray |
| Brand | GenuineOEMSharp |
| Material | Metal with coating |
| Color (Visual) | Dark Gray/Black with speckles (Note: Product specifications may list "Blue" for other product attributes.) |
| Compatible Models | Sharp R9H73, R-9H73, R9H76, R-9H76, R9H80, R-9H80 |
| Approximate Package Dimensions | 16 x 16 x 2 inches |
| Approximate Item Weight | 2 ounces |
Warranty Information
As an original replacement part, this turntable tray typically falls under the warranty terms provided by the seller or the original manufacturer for replacement parts. Specific warranty details are not provided with this individual part. Please retain your proof of purchase and refer to the warranty information provided by the retailer or contact GenuineOEMSharp directly for warranty inquiries.
Customer Support
For further assistance, questions regarding compatibility, or if your microwave model is not listed, please contact the seller or GenuineOEMSharp customer support. Providing your microwave's full model number will help expedite support.
Seller: Buy-Parts-Here (View Seller Profile)