PXN V3II PC Racing Wheel User Manual

1. Introduction

Welcome to the user manual for your new PXN V3II PC Racing Wheel. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your racing wheel and pedal set. Designed for an immersive gaming experience, the PXN V3II is compatible with multiple platforms, including PC, Xbox One, Xbox Series X/S, PS3, PS4, and Nintendo Switch. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Product Overview

The PXN V3II PC Racing Wheel offers a realistic driving simulation experience with its ergonomic design and responsive controls.

2.1. Components

PXN V3II Racing Wheel
Pedal Unit (Gas and Brake)
C-Type Fixing Clamp
User Manual (this document)

2.2. Key Features

6-in-1 Compatibility: Supports PC, Xbox One, Xbox Series X/S, PS3, PS4, and Nintendo Switch.
180-Degree Rotation: Offers 90 degrees of rotation to the left and 90 degrees to the right for responsive steering.
Dual-Motor Vibration Feedback: Provides realistic haptic feedback based on in-game events.
Manual Shifting Design: Features equation-imitating racing shift paddles for quick gear changes.
Linear Pedal Unit: Includes responsive gas and brake pedals for precise control.
Ergonomic Design: 10.24-inch (26cm) diameter wheel with a comfortable rubber grip.
Stable Mounting: Equipped with strong suction cups and a C-type fixing frame for secure attachment to desks or tables.

2.3. Product Views

Figure 2.1: Front view of the PXN V3II Racing Wheel with pedal unit.

Figure 2.2: Detailed front view of the racing wheel, highlighting buttons and the PXN logo.

Figure 2.3: Rear view of the racing wheel, showing the paddle shifters and cable connections.

Figure 2.4: Close-up of the linear pedal unit, featuring gas and brake pedals.

Figure 2.5: Illustration of the C-type fixer and strong suction cups for stable mounting.

Figure 2.6: Diagram showing the 180-degree rotation capability of the steering wheel.

3. Setup Guide

Follow these steps to properly set up your PXN V3II Racing Wheel.

3.1. Connecting the Device

The PXN V3II Racing Wheel connects via USB wired connection.

PC Connection: For Windows 7 users, install drivers from the included disc before plugging in the wheel. For Windows 10/11, the device is typically plug-and-play. Connect the USB cable from the racing wheel to an available USB 3.0 port on your PC for optimal performance.
PS3/PS4 Connection: Connect the USB cable from the racing wheel to your console. For PS4, you may need to connect the wheel to your PS4 controller using a Micro USB cable, and then connect the controller to the console. Ensure the original controller is turned off first.
Xbox One/Xbox Series X/S Connection: Connect the USB cable from the racing wheel to your console. You will need to use a Micro USB cable to connect the PXN V3II to your original Xbox One/Series X/S controller. Ensure the original controller is turned off first.
Nintendo Switch Connection: Connect the USB cable from the racing wheel to your Switch dock or directly to the unit if using a USB-C adapter (not included).

3.2. Mounting the Racing Wheel

The racing wheel can be securely mounted using either the suction cups or the C-type fixing clamp.

Suction Cups: Ensure the surface is clean and smooth. Press the racing wheel firmly onto the surface to engage the seven strong suction cups on the base.
C-Type Fixing Clamp: For enhanced stability, especially during intense gaming sessions, use the C-type clamp. Attach the clamp to the designated slot on the racing wheel's base and tighten it securely to a desk or table edge. This method is highly recommended to prevent movement.

Video 3.1: Overview of the PXN V3II PC Racing Wheel, demonstrating its features and mounting options. This video is provided by the seller, PXNGAME.

4. Operating Instructions

Familiarize yourself with the controls and functions of your PXN V3II Racing Wheel.

4.1. Basic Controls

Steering Wheel: Provides 180 degrees of rotation (90 degrees left, 90 degrees right) for precise steering input.
Pedals: The linear pedal unit includes a gas pedal (right) and a brake pedal (left) for acceleration and deceleration.
Paddle Shifters: Located behind the steering wheel, these allow for quick manual gear changes.
Gear Lever: A dedicated gear lever is available for sequential shifting.
Function Buttons: Various buttons on the wheel correspond to standard controller inputs (e.g., A, B, X, Y, D-pad, Share, Home, Options) for in-game actions and menu navigation.

4.2. Adjusting Steering Sensitivity

The steering sensitivity can be adjusted to suit your preference and game requirements.

Ensure the racing wheel is connected and powered on.
Press and hold the 'Share' and 'Options' buttons simultaneously for approximately 3 seconds.
Press the 'Options' button repeatedly to cycle through sensitivity modes. Observe the green LED indicator; a slower blink rate indicates lower sensitivity, while a faster blink rate indicates higher sensitivity.
Release the 'Options' button when the desired sensitivity is set.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your racing wheel.

Cleaning: Use a soft, dry cloth to wipe down the racing wheel and pedals. Avoid using abrasive cleaners or solvents, as they may damage the surface.
Storage: When not in use, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect all cables to prevent tangling and damage.
Cable Management: Avoid sharp bends or kinks in the cables. Use cable ties to keep them organized and prevent strain on the connectors.

6. Troubleshooting

If you encounter issues with your PXN V3II Racing Wheel, refer to the following common solutions.

Issue	Possible Cause	Solution
Device not recognized by PC/Console.	Incorrect connection, missing drivers (Windows 7), incompatible USB port.	Ensure all cables are securely connected. For Windows 7, install drivers from the included disc before connecting the wheel. Try connecting to a different USB port, preferably a USB 3.0 port. For consoles requiring controller passthrough (PS4/Xbox), ensure the original controller is turned off before connecting the wheel via Micro USB.
No vibration feedback.	Game settings, driver issues, or game does not support vibration.	Check in-game settings to ensure vibration feedback is enabled. Verify that the correct drivers are installed (if applicable). Some games may not fully support vibration features.
Steering wheel feels too sensitive/insensitive.	Sensitivity setting needs adjustment.	Adjust the steering sensitivity using the method described in Section 4.2. Check in-game steering sensitivity settings and adjust as needed.
Pedals are not responding.	Loose connection, calibration issue.	Ensure the pedal unit cable is securely connected to the racing wheel. Recalibrate the device through your system's controller settings if available.
Racing wheel slides on surface.	Suction cups not properly engaged or insufficient grip.	Ensure the mounting surface is clean and smooth. Press down firmly on the wheel to engage the suction cups. For maximum stability, use the C-type fixing clamp to secure the wheel to a desk or table.

7. Specifications

Feature	Detail
Model Number	PXN-V3IIIB
Connection Method	USB Wired Connection (approx. 2m cable length)
Operating Current	<10mA (normal state), <170mA (vibration state)
Power Supply	DC 5V
Product Dimensions (Wheel)	Approx. 10.24 inches (260mm) diameter
Product Weight	Approx. 7.05 pounds (3.2 kg)
Operating Temperature	10 - 40 ℃ (50 - 104 ℉)
Operating Humidity	20 - 80 %

8. Warranty and Support

PXN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official PXN website.

Official PXN Store: Visit the PXN Store on Amazon

	PXN V10 Force Feedback Racing Wheel User Manual Comprehensive user manual for the PXN V10 Force Feedback Racing Wheel, detailing setup, installation, connection guides for PC, PS4, and Xbox, advanced settings, product specifications, and safety precautions. Includes information for PXN A3 pedals and PXN A7 shifter.
	PXN V900 Gen2 Racing Wheel User Manual and Specifications Comprehensive user manual and specifications for the PXN V900 Gen2 Racing Wheel, detailing setup, warranty, safety, and compatibility with PC, PlayStation, Xbox, and Nintendo Switch consoles.
	PXN-V900 Racing Wheel User Manual: Setup, Features, and Compatibility Comprehensive user manual for the PXN-V900 Racing Wheel. Covers setup, features, compatibility with PC, PS3, PS4, Xbox One, Xbox Series X&S, and Nintendo Switch, sensitivity settings, and button programming.
	PXN V9 Racing Wheel User Manual User manual for the PXN V9 racing wheel, detailing system requirements, product overview, connection diagrams for PC, PS3, PS4, Xbox One, Xbox Series X&S, and Nintendo Switch, shifter functions, wheel configuration options via V9 Tool, button programming, and audio communication features.
	PXN V99 Force Feedback Racing Wheel User Manual This user manual provides instructions for the PXN V99 Force Feedback Racing Wheel, covering setup, operation, and specifications for PC, PS4, and Xbox One/Series consoles.
	PXN-V900 Racing Wheel User Manual: Setup, Features, and Connectivity Guide Comprehensive user manual for the PXN-V900 Racing Wheel, covering its features, installation, connectivity to various gaming platforms (PC, PS3, PS4, Xbox One, Xbox Series X&S, Nintendo Switch), sensitivity settings, programmable buttons, and safety precautions.

PXN