Philips 6-Outlet Surge Protector

1. Introduction

The Philips 6-Outlet Surge Protector is designed to expand your power access and safeguard your electronic devices from damaging power surges. This manual provides important information for the proper installation, operation, and maintenance of your surge protector.

Image 1: Philips 6-Outlet Surge Protector, showcasing its compact design and braided cord.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or property damage.

• For indoor use only. Do not use in wet or damp conditions.
• Do not exceed the electrical ratings of the surge protector.
• Plug the surge protector directly into a grounded wall outlet. Do not 'daisy chain' multiple power strips.
• Keep children away from the surge protector and connected devices.
• Do not open or modify the surge protector. There are no user-serviceable parts inside.
• Ensure the power switch is easily accessible.

3. Features

The Philips 6-Outlet Surge Protector offers enhanced functionality and protection:

• 6 Grounded Outlets: Provides power for up to six devices simultaneously.
• 1080 Joules Surge Protection: Protects connected electronics from voltage spikes.
• Integrated Circuit Breaker: Automatically cuts power if capacity is exceeded, preventing overload.
• Automatic Shutdown Technology: Disconnects power to devices when surge protection expires.
• 6ft Braided Fabric Power Cord: Extra-long, tangle-resistant, and durable cord for flexible placement.
• Space-Saving Flat Plug: Allows furniture to be placed closer to the wall.
• Wall-Mountable Design: Features keyhole slots on the back for secure mounting.

Image 2: Key features of the surge protector, including its protection rating and cord length.

4. Setup

Follow these steps to set up your Philips 6-Outlet Surge Protector:

1. Unpack the Device: Carefully remove the surge protector from its packaging.
2. Choose a Location: Select a dry, indoor location near the devices you wish to power. Ensure the 6ft cord can reach a grounded wall outlet without being stretched.
3. Plug into Wall Outlet: Insert the flat plug of the surge protector into a standard 3-prong grounded wall outlet. The flat design allows for placement behind furniture.
4. Connect Devices: Plug your electronic devices into the 6 grounded outlets on the surge protector.
5. Power On: Flip the integrated power switch to the 'ON' position.

4.1 Wall Mounting (Optional)

The surge protector can be mounted to a wall or desk using the keyhole slots on its back.

1. Mark Mounting Points: Measure the distance between the keyhole slots on the back of the surge protector. Mark these points on your desired mounting surface.
2. Install Screws: Insert two screws (not included) into the marked points, leaving a small portion of the screw head exposed. Ensure the screws are appropriate for your wall material.
3. Mount the Surge Protector: Align the keyhole slots on the back of the surge protector with the exposed screw heads. Slide the surge protector down to secure it in place.

Image 3: Rear view of the surge protector with keyhole slots for wall mounting.

5. Operating Instructions

Using your Philips 6-Outlet Surge Protector is straightforward:

• Power Switch: The surge protector features an ON/OFF switch. Press the switch to toggle power to all connected outlets.
• Surge Protection Indicator: (If applicable, refer to product for specific indicator lights) Some models may include an indicator light to confirm active surge protection. If this light is off, the surge protection may have expired, and the unit should be replaced.

Image 4: Detail of the power switch on the surge protector.

Official Product Video: Philips 6-Outlet Surge Protector

Video 1: An official video from Jasco Products Company demonstrating the features and use of the Philips 6-Outlet Surge Protector.

6. Maintenance

To ensure optimal performance and longevity of your surge protector:

• Cleaning: Disconnect the surge protector from the wall outlet and all connected devices before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Inspection: Periodically inspect the cord and housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use and replace the unit.
• Overload Prevention: Avoid overloading the surge protector by connecting too many high-power devices. The integrated circuit breaker will trip if an overload occurs.

7. Troubleshooting

If you encounter issues with your surge protector, try these solutions:

• No Power to Devices:
  • Check if the surge protector's power switch is in the 'ON' position.
  • Ensure the surge protector is securely plugged into a working wall outlet.
  • If the circuit breaker has tripped (often indicated by a recessed button or switch), reset it by pressing it back in or flipping the switch. Reduce the load by unplugging some devices before resetting.
• Surge Protection Indicator Off: If your model has a surge protection indicator and it is off, the surge protection components may have absorbed a significant surge and are no longer active. The unit will still function as a power strip but will not provide surge protection. It is recommended to replace the unit.
• Loose Connections: Ensure all device plugs are fully inserted into the surge protector outlets.

8. Specifications

9. Warranty and Support

This Philips 6-Outlet Surge Protector comes with a limited-lifetime warranty. Additionally, it includes a $100,000 Connected Equipment Guarantee, providing peace of mind for your valuable electronics. For detailed information regarding warranty claims or technical support, please refer to the documentation included with your product or visit the official Philips support website.