1. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
This model kit contains small and sharp parts. Exercise caution during assembly. Keep all components out of reach of small children and pets. Adult supervision is recommended for younger builders (recommended age 15 years and up).
2. Introduction
Thank you for purchasing the Bandai Spirits HGBF 1/144 Star Burning Gundam model kit. This highly detailed and articulated model is inspired by the Gundam Build Fighters anime special "GM's Counterattack." Designed for ease of assembly, this kit allows for a wide range of dynamic poses and features unique weapon functionalities. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building experience.
3. Package Contents
Before starting assembly, please verify that all components listed below are present in your kit:
- Star Burning Gundam Model Kit Runners (x7)
- Sticker Sheet (x1)
- Beam Rifle (x1)
- Shield (x1)
- Beam Sabers (x2)
- Interchangeable Hand Parts (4 pairs)
- Instruction Manual (this document)
Image: Example of model kit runners containing various parts for assembly.
Image: Another view of the plastic runners, showing the organized layout of components.
4. Assembly Instructions (Setup)
Follow these steps carefully to assemble your Star Burning Gundam model kit. It is recommended to use hobby nippers to cleanly remove parts from the runners and a hobby knife for trimming any excess plastic (nubs).
4.1. Head Assembly
Begin by assembling the head unit. Pay close attention to the small visor and antenna pieces.
Image: Components for the head assembly, including faceplate and helmet parts.
4.2. Torso Assembly
Assemble the chest and waist sections. Ensure all polycaps are correctly inserted for articulation.
Image: Torso frame and armor pieces ready for assembly.
4.3. Arm Assembly
Construct both arm units, including shoulder armor, forearms, and hands. The kit includes multiple hand options.
Image: Individual components for assembling the arm, including joint and armor.
4.4. Leg Assembly
Assemble the thigh, knee, and lower leg sections for both legs. Ensure proper alignment for articulation.
Image: Leg frame and armor pieces laid out for assembly.
4.5. Foot Assembly
Construct the foot units, ensuring the ankle joints are securely fitted.
Image: Foot components, including sole and ankle joint parts.
4.6. Backpack Assembly
Assemble the backpack unit, which attaches to the back of the torso.
Image: Backpack components, including thrusters and connection points.
4.7. Weapon Assembly
Assemble the Beam Rifle and Shield. The shield has a unique splitting mechanism.
Image: Parts for the Beam Rifle and Shield, showing their individual components.
Image: A hand holding a shield component, demonstrating a step in the assembly process.
4.8. Final Assembly
Connect all assembled sections (head, torso, arms, legs, backpack) to form the complete Star Burning Gundam. Apply the included stickers as indicated in the instruction manual for added detail.
Image: The Star Burning Gundam fully assembled, showcasing its complete form.
5. Operating Features
The Star Burning Gundam is designed for high poseability and dynamic display. Explore its various features:
- Articulation: The model features extensive articulation in its joints (neck, shoulders, elbows, wrists, waist, hips, knees, ankles) allowing for a wide range of action poses.
- Interchangeable Hands: Utilize the four pairs of interchangeable hand parts to hold weapons or create expressive gestures.
- Beam Rifle: The beam rifle includes a movable barrel, allowing for different firing modes or storage configurations.
- Shield: The shield can be used as a single defensive unit or split apart and mounted on the forearm for a more dynamic look or dual-wielding.
- Beam Sabers: The two beam sabers can be held in the hands for close-quarters combat poses.
Image: Front view of the assembled Star Burning Gundam, ready for posing.
Image: Rear view of the assembled Star Burning Gundam, showing backpack details.
Image: The Star Burning Gundam posed dynamically, holding its beam rifle and shield.
Image: The Star Burning Gundam in an aerial action pose, demonstrating its articulation.
6. Maintenance
To ensure the longevity and appearance of your model kit, follow these maintenance guidelines:
- Cleaning: Dust your model regularly with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
- Handling: Handle the model by its sturdy parts. Avoid excessive force on joints or thin components to prevent breakage.
- Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity, which can cause plastic degradation or discoloration.
- Joint Tightening: If joints become loose over time, a thin coat of clear nail polish or hobby topcoat applied to the joint peg and allowed to dry can help restore friction.
7. Troubleshooting
Here are solutions to common issues you might encounter:
- Parts Not Fitting: Ensure you have removed all plastic nubs from the part. Check the instruction manual for correct orientation. Do not force parts; gentle pressure should be sufficient.
- Loose Parts/Joints: Refer to the 'Joint Tightening' tip in the Maintenance section. For parts that repeatedly fall off, a small amount of plastic cement (for polystyrene plastic) can be used, but be aware this will create a permanent bond.
- Broken Parts: Small breaks can often be repaired with plastic cement. For more significant damage, replacement parts may be available from the manufacturer or third-party suppliers.
- Stickers Not Adhering: Ensure the surface is clean and dry. Use tweezers for precise application. Press firmly to remove air bubbles.
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.6 x 10.73 x 6.4 inches |
| Item Weight | 9.9 ounces |
| Country of Origin | Japan |
| ASIN | B07XG9L6DJ |
| Item Model Number | 4573102588029 |
| Manufacturer Recommended Age | 15 years and up |
| Release Date | May 1, 2024 |
| Language | English |
| Manufacturer | Bandai Hobby |
9. Warranty and Support
This product is manufactured by Bandai Spirits. For specific warranty information or support regarding missing or defective parts, please refer to the documentation included in your product box or visit the official Bandai Spirits website. You can also visit the BANDAI SPIRITS Store on Amazon for more information and contact options.