PTNHZ RACING PTNHZ 211-Piece Hex Bolt Kit

PTNHZ Small Block Engine Hex Bolt Kit User Manual

For Chevy SBC 265, 283, 302, 305, 307, 327, 350, 400 Non-EFI Engines

1. Introduction

This manual provides comprehensive instructions for the PTNHZ Small Block Engine Hex Bolt Kit. This 211-piece stainless steel fastener set is specifically designed for various Chevy Small Block engines, including the 265, 283, 302, 305, 307, 327, 350, and 400 Non-EFI models. Please read this manual thoroughly before installation to ensure proper use and longevity of the components.

PTNHZ Small Block Engine Hex Bolt Kit components with an engine background.
This image displays the various hex bolts and washers included in the kit, set against a blurred background of a small block engine, illustrating the product's application.

2. Kit Contents

The PTNHZ Small Block Engine Hex Bolt Kit includes 211 pieces of stainless steel fasteners, organized for specific engine components. Each part is designed for direct replacement in compatible Chevy SBC engines.

Detailed layout of all 211 pieces of the PTNHZ Small Block Engine Hex Bolt Kit, organized by component type.
A comprehensive view of the entire 211-piece bolt kit, with each type of fastener (distributor, coil bracket, carb stud, crank pulley, fan pulley, fuel pump, header bolts, intake manifold, oil pan, thermostat housing, timing cover, valve covers, water pump) clearly laid out and numbered for easy identification.
Individual bags of PTNHZ Small Block Engine Hex Bolt Kit components, each labeled for easy identification.
This image shows the kit's components neatly packaged in individual, labeled bags, such as 'Timing Cover', 'Fan Pulley', 'Header Bolts', 'Carb Stud Kit', 'Thermostat Housing', 'Water Pump', 'Oil Pan', 'Valve Covers', 'Coil Bracket', 'Intake Manifold', 'Crank Pulley', and 'Distributor', facilitating organized installation.

Included Components:

  • Distributor Bolts
  • Coil Bracket Bolts
  • Carburetor Stud Kit (Studs, Nuts, Washers)
  • Crank Pulley Bolts
  • Fan Pulley Bolts
  • Fuel Pump Bolts
  • Header Bolts
  • Intake Manifold Bolts
  • Oil Pan Bolts
  • Thermostat Housing Bolts
  • Timing Cover Bolts
  • Valve Cover Bolts
  • Water Pump Bolts

3. Material Quality

All fasteners in this kit are manufactured from high-quality 304 Stainless Steel. This material provides superior resistance to corrosion and wear, ensuring long-lasting performance and a clean appearance for your engine components. Each washer is polished and thoroughly cleaned to remove any excess material.

Close-up of 304 Stainless Steel bolts and washers, highlighting corrosion resistance, wear resistance, rust-proof, and high toughness properties.
A detailed close-up shot of the 304 Stainless Steel bolts and washers, emphasizing their polished finish and inherent properties such as corrosion resistance, wear resistance, rust-proof nature, and high toughness, ensuring durability and performance.

4. Installation Guidelines

Proper installation is crucial for the performance and safety of your engine. Always refer to your vehicle's specific service manual for torque specifications and detailed installation procedures for each component. The bolts in this kit are designed for direct placement.

Close-up of a hex bolt securely installed in an engine component, demonstrating direct placement.
This image illustrates a hex bolt properly installed in an engine part, showcasing the direct placement and secure fit of the fasteners within the engine assembly.

General Installation Notes:

  • Preparation: Ensure all mating surfaces are clean and free of old gasket material or debris.
  • Identification: Use the labeled bags and the provided layout image to correctly identify each bolt for its intended location.
  • Thread Engagement: Confirm adequate thread engagement for all fasteners. Some aftermarket components may require different bolt lengths than stock.
  • Torque Specifications: Always tighten bolts to the manufacturer's recommended torque specifications using a calibrated torque wrench. Overtightening or undertightening can lead to component failure.
  • Lubrication: Apply appropriate thread lubricant or sealant as specified by your engine's service manual.

Product Overview Video:

This video provides a visual guide to the PTNHZ Small Block Engine Hex Bolt Kit, showing the unboxing process, the individual packaging of components, and a general overview of the various bolts and washers included in the set. It helps users familiarize themselves with the kit's contents before installation.

5. Maintenance

Stainless steel fasteners generally require minimal maintenance. However, periodic inspection is recommended, especially during other engine service. Check for any signs of loosening, corrosion, or damage. Clean the fasteners as needed with appropriate automotive cleaning agents to maintain their appearance and integrity.

6. Troubleshooting

While this kit is designed for broad compatibility, minor fitment issues can occasionally arise, particularly with aftermarket engine components. Consider the following if you encounter difficulties:

  • Bolt Length: If a bolt bottoms out before tightening, it may be too long for that specific application. Verify the required length against the original bolt or component specifications.
  • Thread Compatibility: Ensure the threads on the bolt match the threads in the component. Do not force bolts, as this can cause damage.
  • Aftermarket Parts: Some aftermarket intake manifolds or other components may have different stud or bolt requirements. Always cross-reference with the aftermarket part's instructions.
  • Missing or Damaged Parts: If any parts are missing or appear damaged upon arrival, contact customer support immediately.

7. Specifications

SpecificationDetail
Head StyleHex
Finish TypePolished
ShapeBlock
Thread SizeFine-thread or coarse-thread
Number of Pieces211
Material304 Stainless Steel
Fastener TypeBolt, Hex, Stud
Item Weight3.27 pounds
Package Dimensions5.28 x 4.61 x 2.91 inches
Compatible EnginesChevy SBC 265, 283, 302, 305, 307, 327, 350, 400 (Non-EFI)

8. Support & Warranty

For any questions regarding the PTNHZ Small Block Engine Hex Bolt Kit, please contact PTNHZ customer support directly. We are committed to assisting you with any issues or inquiries you may have about our product.

Please refer to the product packaging or the point of purchase for specific warranty information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.