Costzon Kids Table and Chair Set (Model GO-FWAM-02372) Instruction Manual

1. Safety Information

Please read and understand all safety warnings and instructions before assembling and using the Costzon Kids Table and Chair Set. Keep this manual for future reference.

• Adult Supervision: Always supervise children while using this furniture to prevent accidents.
• Proper Assembly: Ensure all parts are correctly assembled and tightened according to the instructions to prevent tipping or injury.
• Weight Limit: The table and each chair are designed to support a child weighing up to 110 lbs. Do not exceed this weight limit.
• Placement: Place the furniture on a flat, stable surface. Avoid placing it near stairs, windows, or other potential hazards.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
• No Climbing: Instruct children not to climb on the table or chairs.
• Non-Toxic Materials: This product is made from non-toxic materials, ensuring children's health and safety.

2. Product Components

Before assembly, verify that all components listed below are present and undamaged. Refer to the installation video for visual identification of parts.

Table Components:

• Round Tabletop (L)
• Wooden Legs (A x 4)
• Metal Frame (C)
• Leg Brackets (B x 4)
• Screws (D x 4, F x 4, G x 8, M x 4)
• Washers (E x 4, H x 8)
• Nuts (I x 8)
• Assembly Tools (J x 1, K x 1)

Chair Components:

• Chair Seat (K)
• Wooden Legs (A x 4)
• Metal Frame (M)
• Leg Brackets (B x 1, C x 1, D x 2)
• Screws (E x 4, F x 4)
• Washers (G x 8, H x 8, N x 4)
• Assembly Tools (I x 1, J x 1)

Figure 1: Overview of product components and features.

3. Setup and Assembly

Assembly is required for both the table and chairs. Please follow the steps carefully. An official installation video is provided below for visual guidance.

Official Installation Video:

Table Assembly Steps:

1. Attach the four leg brackets (B) to the top end of each wooden leg (A) using screws (M) and washers (E).
2. Assemble the metal frame (C) by connecting the crossbars.
3. Insert the wooden legs (A) into the designated slots on the metal frame (C) and secure them with screws (G) and nuts (I).
4. Align the assembled leg structure with the pre-drilled holes on the underside of the round tabletop (L).
5. Secure the leg structure to the tabletop using the remaining screws (D) and washers (E). Tighten all connections with the provided tools (J, K).

Chair Assembly Steps (Repeat for each chair):

1. Identify the correct leg brackets: Pay attention to distinguish between bracket types B and C as shown in the video. Attach the appropriate brackets (B x 1, C x 1, D x 2) to the top end of each wooden leg (A) using screws (E) and washers (G).
2. Assemble the metal frame (M) by connecting the crossbars.
3. Insert the wooden legs (A) into the designated slots on the metal frame (M) and secure them with screws (F) and nuts (H).
4. Align the assembled leg structure with the pre-drilled holes on the underside of the chair seat (K).
5. Secure the leg structure to the chair seat using the remaining screws (F) and washers (N). Tighten all connections with the provided tools (I, J).

Figure 2: Fully assembled table and chairs.

4. Operating Instructions

The Costzon Kids Table and Chair Set is designed for children aged 3-12 years, providing a dedicated space for various activities.

• Versatile Use: Ideal for eating, reading, writing, drawing, and playing.
• Ergonomic Design: The chairs feature backrests and armrests to provide effective back support and encourage correct sitting posture.
• Lightweight: The set is lightweight, allowing children to move the chairs easily within a safe environment.

Figure 3: Children engaging in various activities at the table.

5. Maintenance

Proper care will extend the life and appearance of your Costzon Kids Table and Chair Set.

• Cleaning: The MDF tabletop and PP seats are dirt-resistant and can be easily cleaned. Wipe with a dry or damp cloth. Avoid abrasive cleaners.
• Spills: Clean up spills immediately to prevent staining or damage to the tabletop.
• Protection: The bottom of the table and chairs have non-slip pads to protect your floor.
• Screw Tightness: Regularly check and tighten all screws and bolts to maintain stability.
• Storage: Store the furniture in a dry environment. Avoid prolonged exposure to direct sunlight or extreme temperatures.

6. Troubleshooting

If you encounter any issues with your Costzon Kids Table and Chair Set, refer to the following common solutions:

• Wobbly Table/Chairs:
  • Ensure all screws and bolts are fully tightened.
  • Check that the legs are evenly placed on a flat surface.
• Difficulty during Assembly:
  • Review the assembly steps and the installation video carefully.
  • Verify that you are using the correct screws and brackets for each part, especially distinguishing between chair bracket types B and C.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them fully.
• Scratches or Marks:
  • Minor scratches can sometimes be buffed out with a soft cloth and appropriate furniture polish for the tabletop.
  • For deeper marks, consider using touch-up paint or markers designed for furniture.

7. Specifications

Detailed product specifications for the Costzon Kids Table and Chair Set.

Figure 4: Product dimensions and specifications.

8. Warranty and Support

For any warranty claims, missing parts, or further assistance, please contact Costzon customer service directly. Refer to your purchase documentation or the official Costzon website for contact information.

Costzon is committed to providing quality products and support to its customers.