Introduction
The Rockville RKL65MBW marine speakers are designed for high-quality audio in marine and outdoor environments. These 6.5-inch speakers feature a 700-watt peak power output, IP66 waterproof rating, UV resistance, and integrated LED lighting. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your speakers.
Image: Two Rockville RKL65MBW marine speakers with white grilles, featuring red LED illumination.
What's in the Box
Verify that all components are present before beginning installation.
- (4) Rockville RKL65MBW 6.5" Marine Boat Speakers
- Black Grilles (detachable)
- White Grilles (detachable)
- Speaker Wire
- Stainless Steel Mounting Screws
- Cutting Template
Image: Package contents for the Rockville RKL65MBW speakers, showing speakers, interchangeable grilles, wiring, mounting hardware, and a cutting template.
Setup and Installation
Proper installation is crucial for optimal performance and durability. If you are unsure about any steps, consult a professional installer.
- Choose Mounting Location: Select a flat, stable surface on your boat, ATV, UTV, or vehicle that can accommodate the speaker's dimensions (5.6" cutout, 2.56" mounting depth). Ensure there is sufficient clearance behind the mounting surface.
- Prepare Mounting Hole: Use the provided cutting template to mark and cut the speaker opening. Ensure the hole is clean and free of debris.
- Speaker Wiring: Connect the speaker wires to the appropriate terminals on the speaker. The RKL65MBW speakers have a 4 Ohm impedance. Ensure correct polarity (positive to positive, negative to negative) for all speakers in your system.
- LED Wiring: The integrated LED lights are powered via the speaker wire. No additional wiring is typically required for basic LED function (red or blue beat-sync).
- Mount Speakers: Insert the speakers into the prepared openings. Secure them using the provided stainless steel mounting screws. Do not overtighten.
- Install Grilles: Choose between the black or white detachable grilles and snap them into place.
Image: Side view of two Rockville RKL65MBW speakers, showing the depth required for installation.
Image: Rear view of a Rockville RKL65MBW speaker, highlighting the wiring terminals.
Operating Instructions
Once installed, the RKL65MBW speakers are ready for use with your audio system.
- Audio Playback: Connect your audio source (e.g., marine stereo, amplifier) to the speakers. Ensure the audio source is powered on and playing music.
- LED Lighting: The speakers feature beat-sync LED lights that flash red or blue in rhythm with the music. This function is automatic and does not require separate control. The color (red or blue) is typically pre-set or alternates based on the speaker's internal logic.
- Volume Control: Adjust the volume directly from your connected audio source.
Image: Rockville RKL65MBW speakers with black grilles, demonstrating blue LED illumination.
Image: Rockville RKL65MBW speakers with black grilles, demonstrating red LED illumination.
Maintenance
The Rockville RKL65MBW speakers are designed for durability in harsh environments. Regular maintenance helps preserve their condition and performance.
- Cleaning: Periodically wipe down the speaker grilles and cones with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Water Exposure: While IP66 waterproof, it is recommended to rinse off salt water or harsh chemicals after exposure to prevent long-term buildup.
- Connection Check: Annually inspect all wiring connections for corrosion or looseness. Ensure terminals are secure.
- UV Protection: The speakers are UV-treated, but prolonged direct sunlight exposure can still cause material degradation over many years. Consider covers when not in use for extended periods.
Troubleshooting
If you encounter issues with your speakers, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Speakers |
|
|
| Distorted Sound |
|
|
| LED Lights Not Working |
|
|
Specifications
Detailed technical specifications for the Rockville RKL65MBW marine speakers:
| Model Name | RKL65MBW |
| Speaker Type | Marine |
| Speaker Size | 6.5 Inches |
| Peak Power Output | 700 Watts (per pair) |
| RMS Power Output | 85 Watts (per speaker) |
| Impedance | 4 Ohms |
| Frequency Response | 20 KHz (upper limit) |
| Water Resistance Level | IP66 Waterproof |
| Material | Polypropylene, Rubber, Y30 Magnet, Stainless Steel, ABS Plastic |
| Mounting Depth | 2.56 inches |
| Cutout Diameter | 5.6 inches |
| Product Dimensions | 12.24"D x 8.26"W x 8.18"H (Package) |
| Item Weight | 11 Pounds (for 4 speakers) |
| Special Features | Hi-Res Audio, Waterproof, UV Resistant, Rustproof Design, LED Lights |
Warranty and Support
The Rockville RKL65MBW marine speakers come with a Full Warranty. For specific warranty terms, duration, and to register your product, please refer to the warranty card included in your package or visit the official Rockville website.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Rockville Customer Support:
- Website: www.rockvilleaudio.com
- Customer Service: Refer to the contact information provided on the Rockville website or your product packaging.