Beautlex SCT-1001 Lancet for Facial Milia and Whitehead Extraction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of the Beautlex SCT-1001 Lancet. This double-ended tool is designed for the removal of facial milia and whiteheads, offering a hygienic alternative to manual extraction. Please read all instructions carefully before use.

Safety Information

• Sterilization: Always sterilize the lancet before and after each use. Use rubbing alcohol or an appropriate sterilizing solution.
• Skin Preparation: Ensure both the skin and the tool are clean before beginning any extraction.
• Gentle Application: Apply gentle pressure. Excessive force can cause skin damage, scarring, or infection.
• Targeted Use: This tool is intended for milia and whiteheads that have formed a visible head. Do not attempt to extract deep, unformed blemishes.
• Professional Advice: If you are unsure about a blemish or experience persistent skin issues, consult a dermatologist.
• Storage: Keep the tool in its protective case when not in use to prevent accidental injury and maintain hygiene. Keep out of reach of children.

Product Overview

The Beautlex SCT-1001 Lancet is crafted from high-grade stainless steel, featuring a double-ended design for versatile use.

• Sharp Needle Point: Used for gently puncturing the surface of milia or whiteheads.
• Thin Wired Loop: Designed for extracting the contents of the blemish after the initial puncture.

Image: The Beautlex SCT-1001 Lancet, a double-ended tool, stored in its protective synthetic leather case. One end features a sharp needle, and the other a wired loop.

Image: A detailed view of the Beautlex Lancet, highlighting the sharp lancet tip on one end and the wired extraction loop on the other.

Setup

1. Cleanse Skin: Thoroughly cleanse the facial area where extraction will occur with a mild cleanser.
2. Sterilize Tool: Wipe the entire lancet tool with an alcohol prep pad or sterilizing solution. Allow it to air dry.
3. Identify Blemish: Ensure the blemish (milia or whitehead) has a visible head, indicating the contents are close to the surface.
4. Lighting: Perform extraction under bright, clear lighting to ensure precision and prevent accidental skin damage.

Operating Instructions

Follow these steps for effective and hygienic extraction:

1. Puncture (for Milia/Whiteheads): Hold the lancet between your thumb and forefinger. Gently point the sharp needle tip towards the center of the milia or whitehead. With a delicate touch, poke the very surface of the blemish to create a tiny opening. For milia, which are keratin-filled cysts, you will feel minimal resistance. Avoid poking deeply or repeatedly.
2. Position Loop: After creating the opening, turn the tool to use the thin wired loop. Place the loop around the blemish, ensuring the opening you created is within the loop.
3. Extract: Apply slow, gentle, and firm pressure downwards and slightly across the skin with the loop. Do not drag the tool across the skin. The goal is to guide the pus or keratin plug up and out. If the contents do not extract easily, do not force it. Repeat the process for each affected area if necessary, but avoid over-manipulating a single spot.
4. Post-Extraction Care: After extraction, gently clean the area with an antiseptic wipe or mild toner. Avoid touching the area with unwashed hands.

Image: Visual guide demonstrating the two functions of the tool: the sharp needle point for gentle puncture and the thin wired loop for extraction.

Image: A person demonstrating the use of the Beautlex Lancet for blemish removal, highlighting the precise application.

Maintenance

• Cleaning: Immediately after each use, clean the lancet thoroughly with rubbing alcohol or a suitable sterilizing solution. Ensure all residue is removed.
• Drying: Allow the tool to air dry completely before storing to prevent rust or bacterial growth.
• Storage: Store the clean, dry lancet in its provided synthetic leather storage case. This protects the sharp tip and loop from damage and maintains hygiene.
• Inspection: Periodically inspect the tool for any signs of damage, dullness, or corrosion. Discontinue use if the tool is compromised.

Image: The Beautlex Lancet alongside its protective synthetic leather case, emphasizing its design for safe and convenient storage.

Troubleshooting

• Blemish Not Extracting: If the blemish does not extract easily, it may not be ready. Do not force extraction, as this can cause scarring. Wait a few days for the blemish to mature further.
• Skin Irritation/Redness: Some temporary redness is normal after extraction. If irritation persists or worsens, discontinue use and consult a skincare professional. Ensure you are using gentle pressure.
• Tool Appears Dull: The Beautlex Lancet is made from high-grade stainless steel designed to retain sharpness. If the needle tip feels dull, it may be due to improper cleaning or storage. Ensure proper maintenance.
• Infection Signs: If you notice signs of infection (increased redness, swelling, pain, pus), seek medical attention immediately. This can occur if the tool or skin was not properly sterilized.

Specifications

Warranty and Support

The Beautlex SCT-1001 Lancet comes with a 30-day free return policy and a lifetime warranty. If the product does not meet your expectations or if you encounter any issues, please contact Beautlex customer support for assistance, exchange, or refund.

For further support or inquiries, please refer to the official Beautlex store or contact their customer service directly.