Franklin Iron Works Charleston Brass Pendant Light User Manual

Introduction

Thank you for choosing the Franklin Iron Works Charleston Brass Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read it thoroughly before beginning installation and retain it for future reference.

Safety Information

WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
This fixture is intended for indoor use only.
Do not exceed the maximum wattage specified for the bulb.
Handle glass components with care to prevent breakage.

Package Contents

Verify that all components are present before beginning installation:

Pendant Light Fixture (Brass finish, Clear Glass Shade)
Mounting Hardware (Canopy, Chain, Gold Cord)
1 x 8-watt Standard-Medium Base Clear Edison Filament Dimmable LED Bulb

Specifications

Dimensions	16 1/2" high x 13 1/2" wide
Canopy Dimensions	5" wide x 2 1/4" high
Glass Shade Dimensions	13 1/2" wide x 6 1/4" high
Weight	7.7 lbs
Chain Length	6 feet (adjustable)
Cord Length	12 feet (gold)
Material	Iron construction, Clear Glass shade
Finish	Brass - Antique Brass
Bulb Type	LED (E26 base)
Wattage	8 watts (Max 60 watts incandescent equivalent)
Brightness	760 lumens
Color Temperature	2100K (Warm White)
Special Feature	Dimmable
Installation Type	Hardwired, Sloped ceiling adaptable

Installation

Professional installation is recommended. Ensure power is disconnected at the circuit breaker before proceeding.

Step 1: Prepare for Installation

Unpack all components carefully. Lay out all parts on a clean, flat surface. Refer to the diagram below for component identification and dimensions.

Diagram showing dimensions of the pendant light fixture, including 16 1/2 inches high, 13 1/2 inches wide, 5 inch canopy, and 6 1/4 inch glass shade height. — Figure 1: Product Dimensions. This image illustrates the overall height, width, canopy dimensions, and glass shade height of the Charleston Brass Pendant Light.

Step 2: Mount the Canopy

Attach the round canopy to the ceiling junction box using the provided mounting hardware. Ensure the canopy is securely fastened.

Close-up view of the pendant light's brass canopy and chain connection to the ceiling mount. — Figure 2: Canopy Detail. This image shows the brass canopy and the chain mechanism for ceiling attachment.

Step 3: Adjust Chain Length and Wire Connections

Adjust the 6-foot chain to your desired hanging height. Thread the 12-foot gold cord through the chain and canopy. Make all necessary electrical connections (live, neutral, ground) according to local electrical codes. Secure connections with wire nuts.

Detailed view of the pendant light's chain, wiring, and connection point to the fixture body. — Figure 3: Chain and Wiring Connection. This image highlights the chain, electrical cord, and the fixture's upper connection point.

Step 4: Attach Glass Shade and Install Bulb

Carefully attach the clear glass shade to the fixture body. Install the provided 8-watt LED Edison bulb into the E26 socket. Do not overtighten.

Front view of the Franklin Iron Works Charleston Brass Pendant Light with clear glass shade and an Edison-style LED bulb installed. — Figure 4: Assembled Pendant Light. This image displays the fully assembled pendant light with the bulb and glass shade.

Installation Overview Video

For a visual guide on the product's features and appearance, please watch the video below. While not a step-by-step installation guide, it provides a comprehensive overview of the fixture.

Video 1: Franklin Iron Works Charleston 13.5" Wide Brass LED Pendant. This video showcases the design and features of the pendant light, offering a visual understanding of the product.

Operating Instructions

Once installed and power is restored, operate the light fixture using a standard wall switch. This fixture is dimmable; if connected to a compatible dimmer switch, you can adjust the light intensity.

Turning On/Off: Use the wall switch connected to the fixture.
Dimming: If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust brightness.

Maintenance

Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
Bulb Replacement: Ensure power is off and the bulb has cooled. Unscrew the old bulb and replace it with a new E26 base LED bulb, not exceeding 60 watts incandescent equivalent.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	No power to fixture; faulty bulb; incorrect wiring.	Check circuit breaker. Replace bulb. Verify wiring connections.
Light flickers.	Loose bulb; incompatible dimmer switch; loose wiring.	Tighten bulb. Ensure dimmer is LED compatible. Check wiring connections.
Glass shade is chipped or damaged.	Accidental damage during handling or installation.	Contact customer support for replacement parts.

Warranty and Support

For warranty information or technical support, please refer to the manufacturer's website or contact their customer service department. Keep your purchase receipt for warranty claims.

Franklin Iron Works 67V81