Eisen Performance ESN1215F
Eisen Performance Lug Nuts User Manual
Model: ESN1215F
Product Overview
The Eisen 12x1.5 One-Piece Chrome OEM Factory Style Replacement Lug Nuts are designed to provide a durable and aesthetically pleasing replacement for your vehicle's existing lug nuts. These lug nuts are manufactured to meet or exceed OEM and aftermarket standards, ensuring high quality and reliable performance.
They feature a triple-plating process with two layers of nickel and one layer of chrome, resulting in a long-lasting, superior chrome finish. Each lug nut is cold forged for increased strength and uniformity, and hardened for maximum durability and tensile strength.
This set includes 20 solid one-piece lug nuts, specifically designed for Ford Focus, Fusion, Escape, and Lincoln MKC MKZ stock wheels.
Specifications
| Brand: | Eisen Performance |
| Model Number: | ESN1215F |
| Thread Size: | 12x1.5 |
| Hex Size: | 3/4 inch (19mm) |
| Overall Height: | 32mm |
| Seat Type: | 60 degrees, Cone |
| Material: | Stainless Steel |
| Finish: | Chrome (Triple Plating) |
| Number of Pieces: | 20 |
| UPC: | 759170379125 |
Installation and Setup
Proper installation of lug nuts is crucial for vehicle safety. If you are unsure about the installation process, it is recommended to seek professional assistance from a qualified mechanic.
Required Tools:
- Torque wrench
- Lug wrench or socket (3/4 inch or 19mm)
- Jack and jack stands (for lifting the vehicle)
- Wheel chocks
Installation Steps:
- Prepare the Vehicle: Park the vehicle on a flat, level surface. Engage the parking brake and place wheel chocks behind the wheels that will remain on the ground.
- Loosen Lug Nuts: Using a lug wrench, slightly loosen the existing lug nuts on the wheel you intend to remove. Do not remove them completely at this stage.
- Lift the Vehicle: Safely lift the vehicle using a jack and secure it with jack stands. Ensure the vehicle is stable before proceeding.
- Remove Old Lug Nuts and Wheel: Fully remove the loosened lug nuts and carefully take off the wheel.
- Inspect Wheel Studs: Clean any rust or debris from the wheel studs and ensure they are in good condition.
- Mount New Wheel (if applicable) and New Lug Nuts: Place the wheel back onto the studs. Hand-tighten the new Eisen lug nuts onto the studs. Ensure they are seated correctly and not cross-threaded.
- Lower Vehicle and Torque: Partially lower the vehicle so the tire just touches the ground, preventing the wheel from spinning. Using a torque wrench, tighten the lug nuts in a star pattern to the vehicle manufacturer's specified torque setting. Refer to your vehicle's owner's manual for the correct torque specifications.
- Final Lowering: Fully lower the vehicle and remove the jack and jack stands. Remove the wheel chocks.
- Re-check Torque: After driving approximately 50-100 miles, re-check the torque of all lug nuts to ensure they remain properly tightened.
Important Safety Note: We are not responsible for any damages caused by improper fitment/installation.
Maintenance
To ensure the longevity and appearance of your Eisen Performance lug nuts, follow these maintenance guidelines:
- Regular Cleaning: Clean the lug nuts regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners that can damage the chrome finish.
- Avoid Impact Tools: While these lug nuts are durable, excessive use of impact wrenches can potentially damage the chrome finish or the lug nut itself. Hand-tighten and use a torque wrench for final tightening.
- Periodic Inspection: Periodically inspect the lug nuts for any signs of damage, corrosion, or loosening. Address any issues promptly.
- Proper Storage: If removing lug nuts for storage, keep them in a dry, clean environment to prevent corrosion.
Troubleshooting
This section addresses common issues you might encounter with lug nuts.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lug nuts feel loose after driving. | Improper initial torque, settling of components. | Re-torque all lug nuts to the manufacturer's specifications after 50-100 miles of driving. |
| Difficulty removing lug nuts. | Over-tightening, corrosion, or damaged threads. | Ensure correct socket size is used. Apply penetrating oil if corrosion is present. If threads are damaged, replacement may be necessary. Avoid over-tightening during installation. |
| Chrome finish appears dull or discolored. | Exposure to harsh chemicals, road salt, or lack of cleaning. | Clean regularly with mild soap and water. Avoid abrasive cleaners. For stubborn stains, use a chrome-specific cleaner. |
Product Images
Warranty and Support
Eisen Performance stands behind the quality of its products. While specific warranty details are not provided in the product description, the manufacturer offers a "100% Satisfaction" guarantee, stating "Love them or we’ll buy them back from you, no questions asked!!!"
For support or to inquire about the warranty, please contact Eisen Performance directly through their official channels or the retailer from whom the product was purchased.
Please note the legal disclaimer: We are not responsible for any damages caused by improper fitment/installation.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.