IDMarket Detroit Industrial Design Rectangular Dining Table 150 cm

Introduction

Thank you for choosing the IDMarket Detroit Industrial Design Rectangular Dining Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new dining table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The IDMarket Detroit dining table, featuring a light wood-look top and black metal legs, placed in a modern dining room with chairs and decor.

Safety Information

• Adult Assembly Required: This product requires assembly by adults. Keep children away during assembly.
• Use Proper Tools: Ensure you have the correct tools for assembly as specified in the packaging.
• Check All Parts: Before assembly, verify that all parts are present and undamaged. Do not proceed with assembly if any parts are missing or broken.
• Stable Surface: Assemble the table on a soft, clean, and flat surface to prevent scratches or damage.
• Tighten Fasteners: Ensure all screws and bolts are securely tightened. Periodically check and re-tighten fasteners as needed to maintain stability.
• Weight Capacity: Do not exceed the maximum recommended weight of 50 kg (110 lbs) on the tabletop.
• Avoid Climbing: Do not allow children to climb or stand on the table.
• Placement: Place the table on a level floor to prevent wobbling.

Package Contents

Please refer to the packaging for a complete and detailed list of all components and hardware included with your IDMarket Detroit Dining Table. Ensure all items are present before beginning assembly.

Typical components include:

• Tabletop sections (Engineered Wood)
• Leg frames (Metal)
• Crossbar(s) (Metal)
• Assembly hardware (screws, bolts, washers, Allen key)

Setup and Assembly

Follow these steps carefully to assemble your dining table. It is recommended to have two people for assembly.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a soft, clean surface. Compare them with the parts list in your packaging to ensure everything is accounted for.
2. Attach Leg Frames: Position the tabletop (underside facing up) on your assembly surface. Attach the metal leg frames to the designated mounting points on the underside of the tabletop using the provided screws and an Allen key. Do not fully tighten screws yet.
3. Secure Crossbar: Connect the metal crossbar(s) between the leg frames. Ensure the crossbar is correctly oriented and aligned. Secure it with the provided hardware.
4. Tighten All Fasteners: Once all components are in place, gradually tighten all screws and bolts until they are secure. Avoid over-tightening.
5. Upright the Table: With assistance, carefully turn the table upright onto its legs.
6. Final Check: Gently shake the table to ensure it is stable. If there is any wobbling, check that all fasteners are tightened evenly.

Image: A detailed view of the table's corner, illustrating the robust connection where the light wood-look tabletop meets the black metal leg structure.

Operating and Usage

The IDMarket Detroit Dining Table is designed for indoor use in dining areas or kitchens. It comfortably seats up to 8 people.

• Seating Capacity: This rectangular table is designed to accommodate up to 8 individuals.
• Even Weight Distribution: Distribute weight evenly across the tabletop to maintain stability.
• Hot Items: Always use coasters or placemats for hot dishes to prevent heat damage to the tabletop surface.
• Sharp Objects: Avoid placing sharp objects directly on the tabletop without protection to prevent scratches.

Image: A straight-on view of the IDMarket Detroit dining table, showcasing its rectangular light wood-look top and sturdy black metal base.

Maintenance

Proper care will extend the life and appearance of your dining table.

• Cleaning: Wipe the table surface with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Dry immediately with a clean cloth.
• Avoid Harsh Chemicals: Do not use harsh chemicals, abrasive cleaners, or polishes that may damage the finish of the tabletop or metal frame.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood surface.
• Protection: Use coasters and placemats to protect the tabletop from moisture, heat, and scratches.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the tabletop.
• Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the wood material.

Troubleshooting

If you encounter any issues with your dining table, refer to the following common solutions:

• Wobbling Table:
  • Ensure the table is placed on a completely level surface.
  • Check all assembly screws and bolts. Re-tighten them evenly.
  • If the floor is uneven, use furniture pads or shims under the legs to stabilize the table.
• Loose Parts:
  • Periodically inspect all connections and tighten any loose screws or bolts.
• Scratches on Tabletop:
  • Minor scratches on the engineered wood surface may be minimized with furniture repair kits or markers matching the wood tone.
  • For deeper scratches, professional repair may be required.

Specifications

Image: A technical drawing of the table with precise measurements for length (150 cm), width (90 cm), and height (75 cm).

Warranty Information

Specific warranty details for the IDMarket Detroit Industrial Design Rectangular Dining Table are not provided in the product information. Please refer to your purchase receipt or contact the retailer for any applicable warranty terms.

Customer Support

For assistance with assembly, missing parts, or product inquiries, please contact IDMarket customer service through the retailer where the product was purchased. Information regarding the availability of spare parts is currently unavailable.

You may also visit the official IDMarket website for general information or support resources, if available.