Introduction
The Reloop Ready is a compact and powerful 2-deck DJ controller designed for seamless integration with Serato DJ Lite & DJ Pro. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device, ensuring you can maximize its potential for portable performance and preparation.
Setup Guide
Unboxing and Initial Inspection
Carefully remove the Reloop Ready controller from its packaging. Inspect the unit for any signs of damage during transit. Ensure all included accessories are present: USB cable, RCA cable, and Serato DJ Lite software license.
Connecting Your Controller
The Reloop Ready features a built-in USB audio interface, allowing direct connection to active speakers and headphones.
Image: Reloop Ready connection diagram. This diagram illustrates how to connect the Reloop Ready controller to a laptop via USB, and then to active speakers and headphones for audio output.
- Connect the USB-B port on the Reloop Ready to a USB-A or USB-C port on your computer (PC or Mac) using the provided USB cable.
- Connect your active speakers to the RCA Master Out ports on the side of the controller.
- Plug your headphones into the 3.5mm jack connection on the side of the controller.
- Ensure the "PC Mode" switch is engaged if connecting to a computer.
Software Installation
The Reloop Ready is designed for use with Serato DJ Lite and Serato DJ Pro. Please visit the official Serato website to download and install the latest version of your preferred software. Follow the on-screen instructions for installation and activation using the provided license key (if applicable for Serato DJ Pro).
The controller also works with djay on iOS devices. For iOS connectivity, ensure you have the necessary adapters (not included) to connect the USB cable to your iOS device.
Image: Reloop Ready compatibility with djay Pro on iOS. This image shows the controller connected to an iPad, demonstrating its cross-platform support.
Operating Your Reloop Ready Controller
Overview of Controls
The Reloop Ready features a comprehensive layout for intuitive DJ performance:
Image: Reloop Ready feature overview. This image points out various components of the controller, including the two full FX units & loop encoders, responsive jog wheels, large RGB drum pads, full mixing section, and large transport section.
- Jog Wheels: Touch-sensitive for precise mixing and scratching.
- Performance Pads: Large RGB drum pads offering up to 9 performance modes.
- FX Units & Loop Encoders: Two dedicated units for effects and looping control.
- Mixing Section: Full mixing section including gain and filter controls.
- Transport Section: Dedicated controls for play, cue, and sync.
Performance Modes
The controller supports various performance modes, including new scratch bank support:
Image: Reloop Ready performance modes. This graphic lists performance modes such as Hot Cue, Auto Loop, Manual Loop, Sampler, Scratch Bank, Pitch Play, Loop Roll, Beat Grid, and User Mode. Note: Some modes may require Serato DJ Pro or Pitch 'n' Time.
Refer to your Serato DJ software manual for detailed instructions on utilizing each performance mode.
Audio Streaming Integration
The Reloop Ready allows you to stream millions of tracks instantly through integrated services within Serato DJ. Supported streaming services include SoundCloud, Tidal, Beatsource, and Beatport.
Image: Reloop Ready streaming integration. This image highlights the controller's ability to stream music from popular services directly through Serato DJ software.
Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the surface of the controller. Avoid abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
- Transport: When transporting, use a protective case to prevent damage to the jog wheels, faders, and buttons.
- Connectivity: Always handle USB and RCA cables carefully to prevent damage to the ports.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not recognized by computer. | Incorrect USB connection, driver issue, software not running. | Ensure USB cable is securely connected. Try a different USB port. Restart computer and controller. Verify Serato DJ software is open and updated. Check "PC Mode" switch. |
| No sound output. | Incorrect audio output settings, volume levels too low, faulty cables. | Check master volume and headphone cue levels on the controller. Verify audio output settings in Serato DJ. Ensure speakers/headphones are connected correctly and powered on. Test with different cables. |
| Jog wheels or pads unresponsive. | Software glitch, calibration issue, physical damage. | Restart Serato DJ and the controller. Ensure the correct deck is selected in software. If issue persists, consult Reloop support. |
For further assistance, please refer to the comprehensive Serato DJ software manual or contact Reloop customer support.
Technical Specifications
- Model: AMS-READY
- Dimensions: 10.2 x 3 x 2.9 inches (26.0 x 7.6 x 7.4 cm)
- Weight: 2.86 pounds (1.3 kg)
- Connectivity: USB (USB-B to USB-A/USB-C)
- Audio Interface: Built-in USB audio interface
- Outputs: Master RCA output, 3.5mm headphone jack
- Compatible Devices: Laptop (PC/Mac), iOS devices
- Supported Software: Serato DJ Lite, Serato DJ Pro, djay (on iOS)
- Mixer Channel Quantity: 2
- Special Feature: Compact design, fits flush on 13" laptops
- Included Components: USB cable, RCA cable, Serato DJ Lite software
Warranty Information
Reloop products are covered by a limited manufacturer's warranty. For detailed information regarding warranty terms, conditions, and registration, please visit the official Reloop website or contact their customer service department. Please retain your proof of purchase for warranty claims.
Customer Support
If you encounter any issues or have questions regarding your Reloop Ready controller, please visit the official Reloop support page for FAQs, driver downloads, and contact information. You can also refer to the Serato DJ software documentation for software-specific inquiries.
Reloop Official Website: www.reloop.com
Serato Official Website: www.serato.com
