AMERICAN MODIFIED Demon Grille with LED Off Road Lights

1. Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your AMERICAN MODIFIED Demon Grille with integrated LED Off Road Lights. This product is designed to enhance the front appearance and lighting capabilities of your vehicle.

Compatibility: This grille is compatible with 2018 to 2021 Jeep Wrangler JL and Gladiator JT models. It is specifically designed for vehicles without a front-facing trail camera.

Image 1.1: The AMERICAN MODIFIED Demon Grille with LED Off Road Lights installed on a Jeep Wrangler JL.

2. Safety Information

Please read and understand all safety warnings and instructions before beginning installation. Failure to do so may result in injury or damage to your vehicle.

• Always wear appropriate personal protective equipment, including safety glasses and gloves, during installation.
• Ensure the vehicle is parked on a level surface with the engine off and the parking brake engaged.
• Disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or short circuits.
• If you are unsure about any step of the installation process, consult a qualified automotive technician.
• Keep all components and tools away from children and pets.

3. Installation Guide

3.1. Package Contents

Verify that all components are present before beginning installation:

• Demon Grille with integrated LED Off Road Lights
• Weather Strip
• Mounting Screws
• Clips
• Wiring harness for LED lights (may be integrated or separate)

Image 3.1: Illustration of easy installation process and included hardware.

3.2. Tools Required

• Standard Hand Tools (e.g., screwdriver set, trim removal tools)
• Wire strippers/crimpers (for electrical connections, if applicable)
• Multimeter (for verifying electrical connections, if applicable)

3.3. Installation Steps

The installation process is designed to be straightforward, typically taking less than 15 minutes with no drilling, cutting, or major modifications required. The grille's mounting holes and tabs are engineered to perfectly match the original vehicle specifications.

1. Prepare the Vehicle: Park your Jeep on a flat, stable surface. Turn off the engine and engage the parking brake. For safety, disconnect the negative terminal of the vehicle's battery.
2. Remove the Original Grille: Carefully remove the clips or screws securing the top of the factory grille. Gently pull the bottom of the grille to release it from its retaining clips. Disconnect any wiring harnesses attached to the factory grille (e.g., turn signals, daytime running lights).
3. Prepare the New Grille: If the weather strip is not pre-installed, attach it to the top edge of the new Demon Grille.
4. Install the Demon Grille: Align the mounting tabs and holes of the new grille with the corresponding points on your vehicle. Push firmly to engage the retaining clips. Secure the top of the grille with the provided screws or clips.
5. Connect LED Lights: Route the wiring harness for the integrated LED Off Road Lights. Connect the wiring to an appropriate power source (e.g., existing auxiliary light wiring, a new switch, or an ACC fuse). Ensure all electrical connections are secure and properly insulated.
6. Test Functionality: Reconnect the vehicle's battery. Turn on your vehicle and test the functionality of the LED Off Road Lights.
7. Final Inspection: Visually inspect the installed grille to ensure it is securely mounted and all connections are tight.

Image 3.2: The grille features mounting holes and tabs that align with original vehicle points for a precise fit.

Image 3.3: Visual comparison of a vehicle with the stock grille versus the Demon Grille.

4. Operation of LED Off Road Lights

The integrated 20-inch LED light bar is designed for off-road use and provides additional illumination. The operation of these lights depends on how they were wired during installation.

• If wired to an existing auxiliary light switch, activate the lights using that switch.
• If wired to a new dedicated switch, use that switch to turn the lights on and off.
• If wired to an ACC (accessory) fuse, the lights will typically turn on when the vehicle's ignition is in the accessory or run position.

Warning: These LED lights are intended for off-road use only. Check local regulations regarding the use of auxiliary lighting on public roads.

5. Care and Maintenance

To ensure the longevity and appearance of your Demon Grille, follow these maintenance guidelines:

• Cleaning: Wash the grille regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the matte black finish or LED lenses.
• Inspection: Periodically check all mounting points and electrical connections for tightness and corrosion. Re-tighten any loose fasteners.
• LED Lights: Ensure the LED lenses are clean and free from dirt or debris to maintain optimal light output.

6. Troubleshooting

7. Product Specifications

8. Warranty and Customer Support

8.1. Warranty Information

AM AMERICAN MODIFIED products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty documentation included with your purchase or visit the official AM AMERICAN MODIFIED website. Keep your proof of purchase for warranty claims.

8.2. Customer Support

If you encounter any issues during installation or operation, or if you have questions about your product, please contact AM AMERICAN MODIFIED customer support. Contact information can typically be found on the product packaging or the official brand website.

For additional resources and product information, you may visit the AM AMERICAN MODIFIED Brand Store on Amazon.