1. Introduction
Thank you for choosing the VIVOHOME VH482-SL Electric Ice Crusher Shaver. This manual provides essential information for the safe and efficient operation of your new appliance. Please read it thoroughly before use and retain it for future reference.

Image 1: The VIVOHOME Electric Ice Crusher Shaver, ready for use.
2. Important Safety Instructions
- Electrical Safety: Ensure the power supply matches the voltage specified on the appliance. Always plug into a grounded outlet. Do not operate with a damaged cord or plug.
- Blade Safety: The blades are extremely sharp. Exercise extreme caution when handling or cleaning. Never insert hands or objects into the ice hopper while the machine is operating or plugged in.
- Automatic Shut-off: The machine is equipped with a safety feature that stops the blades and cuts power when the hopper handle is open. Do not attempt to bypass this safety mechanism.
- Waterproof Switch: The on/off switch is waterproof for added safety. Ensure hands are dry before operating the switch.
- Placement: Place the ice crusher on a stable, flat, and dry surface to prevent shaking during operation.
- Children and Pets: Keep the appliance out of reach of children and pets. Adult supervision is required when the appliance is in use.
- Cleaning: Always unplug the machine before cleaning. Refer to the "Maintenance and Cleaning" section for detailed instructions.
- Intended Use: This appliance is designed for crushing ice for beverages and food preparation. Do not use it for other purposes.

Image 2: Illustration of the safety features including the automatic shut-off when the hopper handle is open, 3D lattice surface, and heat dissipation vents.
3. Product Overview and Components
Familiarize yourself with the parts of your VIVOHOME Electric Ice Crusher Shaver:
- 1. Ice Hopper: The top compartment where ice cubes are placed.
- 2. Hopper Handle/Lid: Used to press ice down onto the blades and activates the safety switch.
- 3. Dual Blades: Stainless steel blades located inside the hopper for efficient ice shaving.
- 4. Ice Outlet: Where the shaved ice exits the machine.
- 5. Stainless Steel Bowl: Collects the shaved ice.
- 6. Power Switch (On/Off): Controls the machine's power.
- 7. Motor Housing: Contains the 300W motor.
- 8. Heat Dissipation Vents: Located on the back for cooling.
- 9. Ice Pick: Included accessory for breaking up larger ice blocks.

Image 3: Detailed diagram showing the dimensions and key components of the VIVOHOME Ice Crusher.
4. Setup
- Unpack: Carefully remove all components from the packaging. Retain packaging for storage or return if necessary.
- Inspect: Check the appliance for any signs of damage. Do not operate if damaged.
- Clean: Before first use, clean the ice hopper, blades, ice outlet, and stainless steel bowl with warm, soapy water. Rinse thoroughly and dry completely.
- Placement: Position the ice crusher on a clean, dry, and stable countertop. Ensure there is adequate space around the machine for ventilation.
- Assemble: Place the stainless steel bowl under the ice outlet. Ensure the hopper handle is in the upright, open position.
- Power Connection: Plug the power cord into a standard 110V grounded electrical outlet.
5. Operation
Follow these steps to operate your VIVOHOME Electric Ice Crusher Shaver:
- Prepare Ice: Use standard ice cubes. If ice blocks are too large, use the included ice pick to break them into smaller, manageable pieces that fit into the hopper.
- Load Ice: Lift the hopper handle. Place ice cubes into the ice hopper. Do not overfill.
- Close Hopper: Lower the hopper handle completely. The safety switch will engage, allowing the machine to operate.
- Start Crushing: Flip the power switch to the "ON" position. The blades will begin to rotate, and the ice will be shaved into the collection bowl.
- Apply Pressure: Gently press down on the hopper handle to guide the ice towards the blades. Do not apply excessive force.
- Collect Shaved Ice: Once the desired amount of shaved ice is produced, release the hopper handle (this will stop the motor) and turn off the power switch.
- Serve: Use the shaved ice for snow cones, cocktails, or other cold treats.

Image 4: The VIVOHOME Ice Crusher demonstrating its high efficiency with dual blades and 2000 RPM motor.
Video 1: Official VIVOHOME demonstration of the 11-inch Electric Dual Blades Ice Crusher Shaver, showing its operation and the fine ice it produces.

Image 5: The increased barrel body design of the VIVOHOME Ice Crusher, allowing for various container sizes.

Image 6: Examples of cold foods and drinks that can be made with the VIVOHOME Ice Crusher, including shaved ice, ice drinks, fruit shakes, and for seafood presentation.
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and longevity of your ice crusher:
- Unplug: Always unplug the appliance from the power outlet before cleaning.
- Disassemble: Remove the stainless steel bowl.
- Clean Hopper and Blades: Use a damp cloth with mild soap to wipe down the inside of the ice hopper and the blades. Be extremely careful around the sharp blades. Rinse with a clean, damp cloth.
- Clean Bowl: Wash the stainless steel bowl with warm, soapy water. Rinse thoroughly and dry.
- Clean Exterior: Wipe the exterior of the machine with a soft, damp cloth. Do not immerse the motor housing in water.
- Dry: Ensure all parts are completely dry before reassembling or storing the machine. Air dry is recommended for internal components.
- Storage: Store the ice crusher in a cool, dry place when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on. | Not plugged in; Power switch off; Hopper handle not fully closed. | Ensure power cord is securely plugged in; Turn power switch to "ON"; Close hopper handle completely to engage safety switch. |
| Ice is not shaving properly or blades are stuck. | Ice cubes are too large; Too much pressure applied; Blades are dull or damaged. | Break ice into smaller pieces; Apply gentle, consistent pressure; Inspect blades for damage (contact support if damaged). |
| Excessive vibration or noise. | Machine not on a stable surface; Ice is unevenly distributed in hopper. | Place machine on a flat, stable surface; Distribute ice evenly in the hopper. |
| Shaved ice is not fine enough. | Blades may need adjustment or replacement. | This model is designed for fine, fluffy ice. If consistency changes, contact customer support. |
8. Specifications
- Model: VH482-SL
- Brand: VIVOHOME
- Power: 300W
- Voltage: 110 Volts
- Speed: 2000 RPM
- Ice Crushing Capacity: Up to 143 lbs per hour
- Dimensions (L x W x H): 11" x 10.2" x 12.5"
- Item Weight: 10.4 pounds
- Material: Acrylonitrile Butadiene Styrene (ABS), Stainless Steel
- Color: Silver
- UPC: 885469879660
9. Warranty and Customer Support
VIVOHOME products are designed for quality and reliability. For warranty information, product support, or to inquire about replacement parts, please contact VIVOHOME customer service directly.
You can find contact details on the official VIVOHOME website or through your purchase platform.
Online Support: Visit the VIVOHOME Store on Amazon





