CHARMAID CD61530BK-WH
CHARMAID Vanity Set CD61530BK-WH Instruction Manual
Model: CD61530BK-WH
1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your CHARMAID Vanity Set, Model CD61530BK-WH. This vanity set includes a makeup table with four storage shelves, four drawers, a 360° pivoted round mirror, and a cushioned stool. Please read these instructions carefully before assembly and use to ensure proper function and longevity of the product.
2. Safety Information
- Keep all small parts and packaging materials away from children.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the vanity table or stool.
- The maximum weight capacity for the stool is approximately 220 lbs (100 kg).
- The maximum weight capacity for the vanity table is approximately 286 lbs (130 kg).
- Place the vanity set on a flat, stable surface to prevent tipping.
- Avoid exposing the product to excessive moisture or direct sunlight.
3. Parts List
Before beginning assembly, verify that all components are present and undamaged. Refer to the included hardware pack and assembly diagram for specific part identification.
- Vanity Tabletop
- Table Legs (4)
- Mirror Frame with Mirror
- Mirror Support Brackets
- Small Top Drawers (2)
- Main Table Drawers (2)
- Stool Seat
- Stool Legs (4)
- Hardware Pack (screws, bolts, Allen wrench, etc.)

Figure 3.1: Overview of the CHARMAID Vanity Set, including the table, mirror, and stool.
4. Assembly Instructions
Assembly typically takes approximately 30 minutes. An Allen wrench is provided, but a 1/4" ratchet with an Allen bit may expedite the process. A screwdriver will also be needed.
4.1. Assemble the Vanity Table
- Attach the four table legs to the underside of the vanity tabletop using the provided bolts and Allen wrench. Ensure they are securely fastened.
- Insert the two main table drawers into their respective slots.
4.2. Attach the Mirror and Top Storage
- Position the mirror frame with its attached storage shelves onto the back of the vanity tabletop.
- Secure the mirror unit to the tabletop using the designated screws.
- Insert the two small top drawers into their respective compartments.

Figure 4.1: Front view of the assembled vanity table, highlighting the mirror, shelves, and drawers.
4.3. Assemble the Stool
- Attach the four stool legs to the underside of the cushioned stool seat using the provided hardware.
- Ensure all connections are tight and stable.

Figure 4.2: Close-up of the cushioned stool, featuring its floral pattern and sturdy legs.
5. Operation and Features
5.1. Storage Capacity
The vanity set is designed with ample storage. It features four open shelves on the top unit and four functional drawers (two small top drawers and two larger main table drawers). These compartments are suitable for organizing cosmetics, lotions, perfumes, brushes, and other beauty essentials. High baffles on the shelves help prevent items from falling.

Figure 5.1: Illustration of the vanity's storage capabilities, including open drawers and shelves.
5.2. Detachable Top
The top mirror stand of this dressing table can be removed. This allows the main table to be used independently as a writing desk or reading table, offering versatility for various room setups.
5.3. 360° Pivoted Mirror
The round mirror is designed to pivot 360 degrees. This feature allows for easy adjustment to achieve optimal lighting and viewing angles during makeup application or grooming.
5.4. Cushioned Stool
The included stool features thick padding with a floral pattern, providing comfort during use. Protective pads are located at the bottom of the stool legs to prevent slipping and floor scratches. The stool can also be used separately as an ottoman or an additional seat.
6. Care and Maintenance
- Cleaning: The surface of the vanity set is waterproof and scratch-proof. For general cleaning, wipe with a dry, soft cloth. For spills, clean immediately with a damp cloth and then dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
- Mirror Care: Clean the mirror with a standard glass cleaner and a lint-free cloth.
- Stool Care: The cushioned seat can be spot cleaned with a mild fabric cleaner if necessary. Avoid saturating the fabric.
- Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vanity or stool feels wobbly | Loose screws or uneven placement. | Ensure all assembly screws are tightened. Place the unit on a level surface. |
| Drawers do not slide smoothly | Misalignment or obstruction. | Check drawer runners for debris. Ensure drawers are inserted correctly and not overloaded. |
| Mirror does not pivot easily | Tight pivot points. | Gently apply pressure to rotate. Do not force. Check for any obstructions. |
| Small gaps between assembled pieces | Minor manufacturing tolerances. | This is generally cosmetic and does not affect structural integrity. Ensure all fasteners are tight. |
8. Specifications
- Model: CD61530BK-WH
- Brand: CHARMAID
- Color: Black
- Material: Engineered Wood, Metal, Wood
- Product Dimensions (Overall): 29.5"D x 16"W x 48"H (74.9 cm D x 40.6 cm W x 121.9 cm H)
- Item Weight: Approximately 32.5 pounds (14.7 kg)
- Frame Material: Wood
- Seat Material Type: Wood (Stool frame)
- Assembly Required: Yes
- Product Care Instructions: Wipe with Dry Cloth

Figure 8.1: Detailed dimensions of the vanity table and stool.
9. Warranty Information
Specific warranty details may vary. Please refer to your purchase documentation or contact CHARMAID customer support for information regarding warranty coverage and terms for your product.
10. Customer Support
For assistance with assembly, missing parts, or any other inquiries regarding your CHARMAID Vanity Set, please contact CHARMAID customer service through the retailer where the product was purchased or visit the official CHARMAID website for support options.