Skullcandy S2TDW-M003
Skullcandy Sesh True Wireless In-Ear Earbuds
Model: S2TDW-M003
User Manual
Introduction
The Skullcandy Sesh True Wireless In-Ear Earbuds provide a seamless audio experience with their compact design and wireless capabilities. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your earbuds.
What's in the Box
- Wireless Earbuds
- Wireless Charging Case
- Eartips (various sizes)
- Charging Cable
- User Manual
Setup
Charging Your Earbuds and Case
Before first use, ensure both the earbuds and the charging case are fully charged. Place the earbuds into the charging case. Connect the charging cable to the case and a power source. The indicator lights on the case will show charging status. A full charge typically takes approximately 3 hours for the earbuds and 7 hours for the case.
Image: Earbuds charging inside the case with red indicator lights.
Bluetooth Pairing
- Remove both earbuds from the charging case. They will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Select "Sesh" from the list of available Bluetooth devices.
- Once connected, you will hear an audible confirmation, and the earbud indicator lights will turn blue.
Image: Earbud showing a blue light, indicating it is in pairing mode.
Walk Through Video
Video: A detailed walk-through demonstrating the setup and initial use of the Skullcandy Sesh True Wireless Earbuds.
Operating
On-Board Controls
The Skullcandy Sesh earbuds feature intuitive controls directly on the earbuds for managing audio playback, calls, and voice assistant activation.
Image: Front view of the Skullcandy Sesh True Wireless Earbuds.
- Play/Pause: Press the button on either earbud once.
- Next Track: Press the right earbud button twice.
- Previous Track: Press the left earbud button twice.
- Volume Up: Press and hold the right earbud button.
- Volume Down: Press and hold the left earbud button.
- Answer/End Call: Press the button on either earbud once.
- Activate Voice Assistant: Press the button on either earbud three times.
On Board Controls Video
Video: Demonstration of the on-board controls for the Skullcandy Sesh True Wireless Earbuds, including playback, call, and volume functions.
Maintenance
Cleaning
Regular cleaning helps maintain sound quality and hygiene. Use a soft, dry, lint-free cloth to wipe the earbuds and charging case. For earwax buildup on the eartips or speaker mesh, gently use a cotton swab or a small, soft brush. Do not use abrasive materials or harsh chemicals.
Storage
When not in use, always store the earbuds in their charging case to protect them and keep them charged. Store the case in a cool, dry place away from extreme temperatures and direct sunlight.
Troubleshooting
| Issue | Possible Solution |
|---|---|
| Earbuds not pairing | Ensure earbuds are fully charged. Turn off and on your device's Bluetooth. Forget "Sesh" from your device's Bluetooth list and re-pair. |
| Only one earbud working | Place both earbuds back in the case, close the lid, wait a few seconds, then remove them. Ensure both are charged. |
| Low volume or poor sound quality | Adjust volume on both earbuds and connected device. Ensure eartips fit snugly in your ears. Clean any debris from the speaker mesh. |
| Charging issues | Check charging cable and power source. Ensure earbuds are correctly seated in the charging case. Clean charging contacts on earbuds and case. |
| Bluetooth connectivity drops | Ensure your device is within the Bluetooth range (approx. 10 meters). Avoid physical obstructions between earbuds and device. Turn off and on Bluetooth on your device. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Sesh |
| Model Number | S2TDW-M003 |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Version | 5.0 |
| Battery Life (Earbuds) | Up to 3 hours |
| Total Battery Life (with Case) | Up to 10 hours |
| Charging Time (Earbuds) | Approx. 3 hours |
| Charging Time (Case) | Approx. 7 hours |
| Water Resistance Level | IP55 (Sweat, Water, and Dust Resistant) |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16 Ohm |
| Noise Control | Sound Isolation |
| Item Weight | 5 Ounces |
| Material | Plastic |
Warranty and Support
Skullcandy Sesh True Wireless In-Ear Earbuds come with a 2-year warranty. For detailed warranty information, please refer to the official Skullcandy warranty policy.
Image: Warranty and Customer Care information from the user manual.
- Customer Care Number: 1860-500-3858
- E-mail Id: customercare@brandeyes.in
- Working Timings: Monday-Friday, 10:00 AM to 06:00 PM
- Official Warranty Policy: https://www.skullcandy.in/customer-support-warranty-policy/
Additional resources:
- User Guide (PDF): Download User Guide
- Warranty (PDF): Download Warranty Information
Related documentsS2TDW-M003
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.