Introduction
The mooas Cube Timer is a simple and intuitive gravity-sensor timer designed for various time management needs. Its cube design allows for quick and easy activation of pre-set timers by simply flipping the cube to the desired time face. This manual provides essential information for setting up, operating, and maintaining your mooas Cube Timer.
Image: The violet mooas Cube Timer, showing its compact design.
Setup
1. Battery Installation
The mooas Cube Timer requires 2 AAA batteries (not included). To install:
- Locate the battery compartment on the bottom of the timer.
- Open the battery compartment cover.
- Insert 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Image: Underside of the cube timer showing the battery compartment and alarm volume switch.
2. Adjusting Alarm Volume
The alarm volume can be adjusted using the switch located on the bottom of the timer. You can select between:
- HI: High volume alarm.
- LO: Low volume alarm.
- OFF: Turns off the timer completely (no alarm sound).
Operating Instructions
1. Starting a Timer
The mooas Cube Timer is designed for ease of use. To start a timer:
- Ensure the timer is powered on (HI or LO volume selected).
- Simply turn the cube so that the side with your desired pre-set time (e.g., 5 min, 10 min, 20 min, 30 min) faces upwards.
- The timer will immediately begin counting down. A red light will blink to indicate the timer is active.
Image: Visual guide on how to activate the timer by placing the desired time face up.
2. Pre-set Times (Violet Model)
The Violet mooas Cube Timer features the following pre-set time options:
- 5 minutes
- 10 minutes
- 20 minutes
- 30 minutes
Other color variants of the mooas Cube Timer may offer different time sets.
Image: Various cube timers demonstrating different time configurations available across models.
3. Digital Display
A small digital display on the side of the timer shows the remaining time. This display is always oriented correctly for viewing, regardless of which side is facing up.
4. Stopping the Timer
When the timer reaches zero, the alarm will sound (if not set to OFF). To stop the alarm and reset the timer, simply turn the cube so that the side with the LCD screen or the side without any numbers faces upwards.
Features
- Pre-set Times: 5, 10, 20, 30 minutes for the Violet model.
- Easy to Use: Gravity sensor activation by flipping the cube.
- Simple Design: Aesthetic cube shape suitable for various environments.
- Adjustable Alarm Volume: High, Low, or Off settings.
- Red Light Indicator: Blinks when the timer is active.
- Battery Operated: Requires 2 AAA batteries.
Maintenance
- Cleaning: Wipe the timer with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the display dims or the timer functions inconsistently.
- Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer makes a rattling sound. | Internal weight for gravity sensing. | This is normal and not a defect. The internal weight is necessary for proper functioning. |
| Timer does not start or functions inconsistently. | Low batteries, incorrect orientation, or internal mechanism issue. |
|
| Red light is distracting. | Personal preference. | The red light indicates the timer is active. If distracting, consider placing the timer in a position where the light is not directly visible, or covering the light with a small piece of opaque tape. |
Specifications
- Brand: mooas
- Model: MT-C1
- Color: Violet
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Product Dimensions: 2.6"D x 2.6"W x 2.6"H (66 x 66 x 66 mm)
- Item Weight: 2.87 ounces (81.5 Grams)
- Power Source: 2 AAA batteries (not included)
- Pre-set Times (Violet): 5, 10, 20, 30 minutes
Image: Diagram illustrating the dimensions of the mooas Cube Timer.
Warranty and Support
For warranty information or product support, please refer to the packaging or contact mooas customer service directly. Keep your purchase receipt for warranty claims.
