BLACK+DECKER 5140234-67

BLACK+DECKER Vacuum Charger 5140234-67 Instruction Manual

Model: HSVB420J Compatible Charger

1. Introduction

This instruction manual provides essential information for the safe and effective use of the BLACK+DECKER OEM Replacement Vacuum Charger, part number 5140234-67. This charger is specifically designed for compatibility with the BLACK+DECKER HSVB420J vacuum cleaner model.

Please read this manual thoroughly before using the charger and retain it for future reference.

2. Important Safety Information

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

  • Indoor Use Only: This charger is designed for indoor use in dry locations only. Do not expose to rain or moisture.
  • Risk of Electric Shock: Do not disassemble the charger. Refer all servicing to qualified service personnel.
  • Proper Voltage: Ensure the power outlet voltage matches the charger's input specifications (100-240V AC).
  • Damaged Cords: Do not operate the charger with a damaged cord or plug. If damaged, replace immediately.
  • Ventilation: Do not cover the charger during operation. Ensure adequate ventilation.
  • Children: Keep the charger out of reach of children.

3. Setup

Follow these steps to set up your charger:

  1. Unpack the Charger: Carefully remove the charger from its packaging. Inspect it for any visible damage.
  2. Identify Components: The charger consists of the main power adapter unit and the charging cable with its connector.
  3. Locate Charging Port: Identify the charging port on your BLACK+DECKER HSVB420J vacuum cleaner.
BLACK+DECKER OEM Replacement Vacuum Charger 5140234-67

Figure 1: The BLACK+DECKER OEM Replacement Vacuum Charger (Part No. 5140234-67). This image displays the charger unit with its two-prong plug, the coiled power cord, and the charging connector. The label on the charger indicates input voltage (100-240V AC, 50/60Hz, 0.3A) and output (18V, 500mA).

4. Operating Instructions

To charge your BLACK+DECKER HSVB420J vacuum cleaner:

  1. Connect to Vacuum: Insert the charging connector of the charger into the charging port of your HSVB420J vacuum cleaner. Ensure a secure connection.
  2. Plug into Outlet: Plug the charger's two-prong plug into a standard electrical wall outlet (100-240V AC).
  3. Charging Indicator: Refer to your vacuum cleaner's user manual for information on its charging indicator light (if applicable). The charger itself does not typically have an indicator light.
  4. Charging Time: Allow the vacuum cleaner to charge for the duration specified in its original user manual. Do not overcharge.
  5. Disconnect: Once charging is complete, unplug the charger from the wall outlet first, then disconnect the charging connector from the vacuum cleaner.

Note: This charger is a replacement part. Always follow the charging guidelines provided in the original BLACK+DECKER HSVB420J vacuum cleaner manual.

5. Care and Maintenance

  • Cleaning: Disconnect the charger from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Storage: Store the charger in a cool, dry place when not in use. Avoid wrapping the cord too tightly around the adapter.
  • Inspection: Periodically inspect the charger cord and plug for any signs of damage. If damage is found, discontinue use and replace the charger.

6. Troubleshooting

Problem Possible Cause Solution
Charger not working / Vacuum not charging
  • No power to outlet.
  • Charger not properly plugged in.
  • Charging connector not fully inserted into vacuum.
  • Damaged charger or cable.
  • Vacuum battery issue.
  • Test outlet with another device.
  • Ensure charger is securely plugged into outlet.
  • Verify charging connector is fully seated in vacuum port.
  • Inspect charger and cable for damage. Replace if damaged.
  • Consult your vacuum cleaner's manual or contact BLACK+DECKER support for battery-related issues.
Charger feels warm during use Normal operation. A slight warmth is normal during charging. If it becomes excessively hot or emits smoke/odor, unplug immediately and discontinue use.

7. Specifications

Model Number: 5140234-67
Compatible Vacuum Model: BLACK+DECKER HSVB420J
Input Voltage: 100-240V AC, 50/60Hz, 0.3A
Output Voltage/Current: 18V DC, 500mA
Wattage: 45 Watts
Power Source: Corded Electric
Main Power Connector Type: 2 Pin (US Standard)
Product Dimensions: Approximately 0.39 x 0.39 x 0.39 inches (Charger unit only)
Item Weight: 2.89 ounces (0.08 Kilograms)
Manufacturer: Black & Decker

Note: Specifications are subject to change without notice for product improvement.

8. Warranty Information

As an OEM replacement part, this charger typically carries a limited warranty against defects in materials and workmanship. Specific warranty terms and duration may vary depending on the retailer or the original manufacturer's policy for replacement parts.

Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided by your retailer or contact BLACK+DECKER customer support.

9. Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact:

  • BLACK+DECKER Customer Service: Refer to the official BLACK+DECKER website or your vacuum cleaner's original manual for contact details.
  • Retailer Support: Contact the retailer from whom you purchased this replacement charger.

When contacting support, please have the following information ready:

  • Charger Model Number: 5140234-67
  • Compatible Vacuum Model: HSVB420J
  • Date of Purchase
  • Description of the issue

© 2023 BLACK+DECKER. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.