BOBBI BOSS Premium Wig M428 Mila Instruction Manual

Introduction

This manual provides comprehensive instructions for the proper use, care, and maintenance of your BOBBI BOSS Premium Wig M428 Mila. Please read this guide thoroughly to ensure the longevity and optimal appearance of your wig.

Setup and First Use

Upon receiving your BOBBI BOSS Premium Wig M428 Mila, gently remove it from its packaging. Hold the wig by the cap and gently shake it to help the style settle. For best results, place the wig on a wig stand to allow it to air out and maintain its shape before the first wear.

Preparing Your Natural Hair

• Ensure your natural hair is clean and dry.
• Braid, wrap, or flatten your natural hair as much as possible to create a smooth base.
• A wig cap (not included) can be used to secure your natural hair and provide a smooth surface for the wig.

Wearing Instructions

The BOBBI BOSS Premium Wig M428 Mila features secure inner comb fittings and an adjustable band for a comfortable and secure fit.

1. Hold the wig by the ear tabs.
2. Place the front of the wig at your natural hairline.
3. Slide the wig on from front to back.
4. Adjust the inner combs and the adjustable band at the nape of your neck to achieve a snug and comfortable fit.
5. Gently style the wig with your fingers or a wide-tooth comb to achieve the desired look.

Image: Front view of the BOBBI BOSS Premium Wig M428 Mila, showcasing its short, layered style and vibrant red color (S99J/BUG).

Care and Maintenance

Proper care is essential for maintaining the quality and appearance of your BOBBI BOSS Premium Wig M428 Mila. Follow these steps for optimal maintenance:

1. Detangling: Holding the wig by the part area, use a wide-tooth comb to gently comb the hair to remove any tangling. Always start at the bottom and work your way to the top, combing small sections of the hair with downward strokes until all of the hair has been combed and detangled.
2. Washing: Drench the wig with a solution of lukewarm water and a deep cleansing shampoo or a wig shampoo. Use only lukewarm water.
3. Shampoo Application: Use a brush to work additional shampoo into the hair using the same combing technique that was used initially to comb the hair. Start at the bottom of the hair and work your way up to the top, brushing small sections of the hair with downward strokes. Do not scrub the hair.
4. Rinsing Shampoo: Rinse the hair in the direction of the hair – from root to end – with flowing water until all of the shampoo is removed.
5. Conditioning: Use a brush to work a detangling conditioner into the hair in the same manner as in Step 3.
6. Rinsing Conditioner: Rinse the hair in the same manner as in Step 4 with cold water until the water coming off the hair is clear and all of the conditioner is removed.
7. Drying Preparation: Gently pat the hair with a towel to remove excess water.
8. Natural Drying: Once finished with the combing, hang the wig or place it on a wig stand and allow the wig to dry naturally.
9. Styling After Drying: When the wig is completely dry, use a brush or a pick comb to create the desired style.

Heat Styling

This wig is heat safe up to 400°F (204°C). When using heat styling tools, always start with a low temperature and gradually increase if necessary. Avoid excessive heat exposure to prolong the life of the wig fibers.

Image: Side view of the BOBBI BOSS Premium Wig M428 Mila, showing the layered cut and natural-looking texture.

Image: Close-up view of the BOBBI BOSS Premium Wig M428 Mila hair fiber, highlighting the blend of red and black tones.

Troubleshooting

• Tangling: If the wig tangles frequently, ensure you are detangling regularly from ends to roots with a wide-tooth comb. Avoid harsh brushing.
• Dullness: If the wig appears dull, it may be due to product buildup. Follow the washing instructions carefully using a deep cleansing wig shampoo.
• Shedding: Minimal shedding is normal, especially during the first few wears. Excessive shedding may indicate improper handling or over-brushing. Be gentle when combing and washing.
• Fit Issues: If the wig feels too loose or too tight, adjust the internal combs and the adjustable band for a more secure and comfortable fit.

Product Specifications

Image: Back view of the BOBBI BOSS Premium Wig M428 Mila, showing the nape area and overall short style.

Support and Warranty

For further assistance, questions, or warranty information regarding your BOBBI BOSS Premium Wig M428 Mila, please contact the manufacturer, Midway International, or your point of purchase. Keep your purchase receipt for any warranty claims.

Manufacturer: Midway International