CHARMAID Vanity Desk with LED Mirror and Stool (Model CD61374-US) Instruction Manual

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your CHARMAID Vanity Desk with LED Mirror and Stool. Please read these instructions carefully before use and retain them for future reference.

Safety Information

• This product includes an anti-tip device. Always use this device to securely anchor the table to the wall to prevent tipping.
• Non-slip foot pads are included for added stability and floor protection. Ensure they are properly installed.
• Do not exceed the weight capacity: Tabletop: 110 lb, Stool: 330 lbs.
• Keep away from water and excessive humidity.
• Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as necessary.

Package Contents

Verify that all components are present before beginning assembly.

• 1 x Vanity Table
• 1 x Vanity Stool
• 1 x 12V1A Power Adapter
• 1 x User Guide (this document)
• Hardware Pack (screws, anti-tip device, etc.)

Assembly Instructions

Assembly is required. It is recommended to assemble the vanity desk on a soft, clean surface to prevent scratches. Two people may be required for certain steps.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Identify each part using the included parts list (refer to the physical user guide for detailed diagrams).
2. Assemble the Vanity Table Base: Attach the solid wood legs to the tabletop using the provided hardware. Ensure they are securely fastened.
3. Install Drawers: Insert the two small drawers and two large drawers into their respective slots.
4. Attach Mirror: Secure the LED lighted mirror to the vanity tabletop. Connect the power adapter to the mirror's power input.
5. Assemble the Vanity Stool: Attach the stool legs to the stool seat using the provided hardware.
6. Install Anti-Tipping Device: Securely attach the anti-tipping device to the back of the vanity table and to a wall stud, following the instructions provided in the hardware pack. This step is crucial for safety.
7. Final Check: Ensure all connections are tight and the vanity desk is stable before use.

Image: Fully assembled CHARMAID Vanity Desk with LED Mirror and Stool, showcasing its design and placement in a bedroom.

Operating Instructions

LED Lighted Mirror

The integrated LED mirror features three color lighting modes and adjustable brightness.

• Power On/Off: Tap the touch switch on the mirror to turn the lights on or off.
• Change Color Mode: Short press the touch switch to cycle through the three color modes: warm yellow, warm white, and cool white.
• Adjust Brightness: Long press the touch switch to adjust the brightness level within the selected color mode. Release when the desired brightness is achieved.

Image: Illustration of the LED mirror's three color lighting modes (warm yellow, warm white, cool white) and the touch control for brightness adjustment.

Storage

The vanity desk includes four drawers for organizing cosmetics and accessories.

• Small Drawers: Two smaller drawers are located on the tabletop for smaller items like jewelry or makeup brushes.
• Large Drawers: Two larger drawers are integrated into the desk structure, suitable for larger items such as hair tools or skincare products.

Image: An overhead view demonstrating the storage capacity of the vanity desk, highlighting the two small and two large drawers with items organized within.

Maintenance

• Cleaning: Wipe the surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Dusting: Regularly dust the mirror and desk surfaces to maintain clarity and appearance.
• Hardware Check: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
• Stool Care: The faux velvet fabric on the stool can be spot cleaned with a damp cloth and mild detergent if needed.

Troubleshooting

• Lights Not Working:
  • Ensure the power adapter is securely plugged into both the mirror and a working electrical outlet.
  • Check if the outlet is functional by plugging in another device.
• Vanity Desk Wobbles:
  • Verify that all leg attachment screws are fully tightened.
  • Ensure the desk is placed on a flat, even surface. Adjust foot pads if necessary.
• Drawers Stick:
  • Check for any obstructions within the drawer slides.
  • Ensure drawers are properly aligned on their tracks.

Specifications

Image: Detailed dimension diagram for the vanity desk and accompanying stool.

Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase documentation or visit the official CHARMAID website.

Extended protection plans may be available for purchase separately.