Product Overview
The FEICE FM506 is an elegant automatic mechanical watch designed with a classic minimalistic aesthetic. It features a white dial with colorful minute markers, delicate analog hands, and a date window. The watch is powered by a Seagull automatic movement and is built with a curved mineral mirror and a genuine leather strap.
Image: FEICE FM506 Automatic Watch, showcasing its minimalistic design.
Key Features:
- Elegant Minimalistic Design: White dial with colorful minute markers and analog hands.
- Premium Curved Mineral Mirror: High light transmission and wear resistance.
- Seagull Automatic Movement: Over 100 moving parts, 20 jeweled movements, up to 30 hours power reserve. Transparent back for viewing movement.
- Comfortable Fit: High-quality stainless steel case (40mm wide) and genuine leather strap.
- Water Resistance: 30 meters (3 ATM) for everyday wear.
Setup and Initial Use
Winding the Watch:
The FEICE FM506 is an automatic mechanical watch. It is powered by the natural motion of your wrist. For initial use or if the watch has stopped, it needs to be manually wound.
- Manual Winding: Rotate the crown clockwise approximately 30-40 times while it is in the closed position (position 0). This will build up the initial power reserve.
- Automatic Winding: Once wound, wearing the watch for at least 8-10 hours a day will keep it sufficiently wound through your daily activities. If worn for less than 10 hours, manual winding may be required to maintain power.
Setting the Time and Date:
- Setting the Date: Pull the crown out to position 1. Rotate the crown either clockwise or counter-clockwise (refer to specific model instructions if available, otherwise test gently) to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this is when the date change mechanism is active and could be damaged.
- Setting the Time: Pull the crown out to position 2. Rotate the crown to move the hour and minute hands to the correct time. Push the crown back into position 0 to start the watch.
Image: Close-up of the watch crown for time and date adjustment.
Operating the Watch
Your FEICE FM506 watch operates continuously as long as it is sufficiently wound. The automatic movement harnesses kinetic energy from your wrist's motion. The transparent case back allows you to observe the intricate mechanical movement.
Image: The FEICE FM506 watch being worn on a wrist.
Power Reserve:
A fully wound watch has a power reserve of up to 30 hours. If the watch is not worn for an extended period, it will stop. Simply re-wind it manually and set the time to resume operation.
Water Resistance:
The watch is water-resistant to 30 meters (3 ATM). This means it is suitable for daily use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving. Always ensure the crown is fully pushed in before any contact with water.
Maintenance and Care
- Cleaning: Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, use a damp cloth and mild soap if necessary, then dry thoroughly. Avoid harsh chemicals.
- Avoid Extreme Conditions: Protect your watch from extreme temperatures, direct sunlight for prolonged periods, and strong magnetic fields, which can affect accuracy.
- Impact Protection: While durable, avoid dropping the watch or subjecting it to strong impacts, as this can damage the delicate internal movement.
- Leather Strap Care: Leather straps can degrade over time with exposure to water, sweat, and oils. Regular cleaning and avoiding prolonged moisture will extend its life.
Image: The watch with its genuine leather strap.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs inaccurately | Insufficient power reserve; not worn enough; strong magnetic field exposure; internal damage. | Manually wind the watch (30-40 turns of the crown). Wear the watch for at least 8-10 hours daily. Keep away from strong magnets. If issues persist, contact customer support. |
| Date does not change or changes incorrectly | Date set during restricted hours (9 PM - 3 AM); incorrect setting. | Avoid setting the date during restricted hours. Re-set the date carefully. If mechanism is damaged, contact support. |
| Condensation under the crystal | Temperature changes; water ingress. | If minor, it may dissipate. If persistent or severe, indicates water ingress. Seek professional service immediately to prevent damage. |
Specifications
Image: Detailed specifications and dimensions of the FM506 watch.
| Feature | Detail |
|---|---|
| Model Number | FM506 |
| Movement Type | Automatic Mechanical (Seagull) |
| Case Material | Stainless Steel |
| Case Diameter | 40 mm |
| Case Thickness | 10.5 mm |
| Band Material | Genuine Leather |
| Band Width | 20 mm |
| Band Length | 260 mm |
| Crystal Type | Curved Mineral Glass |
| Water Resistance | 30 Meters (3 ATM) |
| Display Type | Analog |
| Clasp Type | Buckle |
| Weight | 0.2 Kilograms (approx. 7.05 ounces) |
Official Product Video
Video: An official overview of the FEICE FM506 Automatic Mechanical Watch, showcasing its design and features.
Warranty and Support
Warranty Information:
This FEICE watch comes with a Limited Warranty. For specific details regarding coverage and duration, please refer to the warranty card included with your purchase or contact FEICE customer service.
Customer Support:
Should you have any questions, require assistance, or encounter any issues with your FEICE FM506 watch, please do not hesitate to contact the FEICE customer support team. We are committed to providing satisfactory solutions and will respond within 24 hours.
Contact information can typically be found on the FEICE official website or through your purchase platform.