Important Safety Instructions
Please read and understand all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Placement: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
- Moisture Warning: NOT FOR HUMID ENVIRONMENTS. Avoid using this heater in bathrooms, laundry rooms, or other high-moisture areas to prevent electrical hazards.
- Clearance: Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front, sides, and rear of the heater.
- Overheat Protection: The heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the heater and allow it to cool for at least 30 minutes before restarting.
- Tip-Over Protection: For enhanced safety, this heater includes a built-in tip-over switch that automatically shuts off the unit if it is accidentally tipped over. Ensure the heater is placed on a stable surface for proper operation of this feature.
- Power Indicator: A red light indicates when the heater is powered on and operating.
Product Overview
The Amazon Basics Oscillating Ceramic Space Heater is a portable indoor heating solution designed for efficient warmth in small spaces. It features ceramic heating elements for rapid heat generation and an adjustable thermostat for customizable comfort.
- Dimensions: 7.52"D x 6.34"W x 9.45"H
- Weight: Approximately 3.52 pounds
- Heating Coverage: Up to 160 square feet
- Power: 1500W (High), 900W (Low)
Figure 1: Front view of the Amazon Basics Oscillating Ceramic Space Heater in silver.
Setup
Setting up your space heater is quick and easy. Follow these steps to begin enjoying comfortable warmth.
- Unpack: Carefully remove the heater from its packaging and ensure all components are present and undamaged.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure the tip-over safety switch on the bottom of the unit is fully depressed by the surface. If the switch is not fully depressed, the heater will not operate.
- Power Connection: Plug the power cord into a standard 120V AC electrical outlet. Avoid using extension cords or power strips with this appliance.
Figure 2: The integrated tip-over switch located on the base of the heater, which must be fully depressed for operation.
Operating Instructions
Your Amazon Basics space heater offers simple controls for personalized heating.
- Thermostat Control Dial (Left Dial): This dial allows you to set your desired room temperature. Turn the dial clockwise to increase the temperature setting and counter-clockwise to decrease it. The heater will cycle on and off to maintain the set temperature.
- Mode Selection Dial (Right Dial): Choose from three operating modes:
- Fan Only: Provides air circulation without heat.
- Low Heat (900W): For moderate warmth and energy efficiency.
- High Heat (1500W): For maximum warmth and rapid heating.
- Oscillation Function: The heater features a 45-degree oscillation function to ensure even heat distribution across a wider area. This function is automatically engaged when a heat setting is selected.
Figure 3: The top panel of the heater showing the thermostat control dial (left) and mode selection dial (right).
Maintenance
Regular maintenance helps ensure the longevity and efficient operation of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
Troubleshooting
If you encounter any issues with your heater, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in, power outlet issue, tip-over switch not engaged, or overheat protection activated. | Ensure power cord is securely plugged in. Check power outlet. Place heater on a firm, flat surface to engage tip-over switch. If overheated, unplug and let cool for 30 minutes. |
| Heater produces no heat. | Fan Only mode selected, or thermostat set too low. | Select Low Heat or High Heat mode. Increase thermostat setting. |
| Heater cycles on and off frequently. | Thermostat set too high for room temperature, or room is too small. | Lower the thermostat setting. Consider using the Low Heat setting for smaller rooms. |
Specifications
- Brand: Amazon Basics
- Model Number: DQ1928-Y
- Color: Silver
- Special Feature: Oscillation, Overheat and Tip-Over Protection, Adjustable Settings
- Form Factor: Floor or Table Standing, Portable for Indoor Use
- Product Dimensions: 7.52"D x 6.34"W x 9.45"H
- Item Weight: 3.52 pounds
- Recommended Uses: Home, Office
- Mounting Type: Floor Mount
- Heating Coverage: 160 square feet
- Burner Type: Infrared Heating
- Number of Speeds: 3 (Fan Only, Low Heat, High Heat)
- Voltage: 120 Volts
- UPC: 819079021843
- Manufacturer: Amazon
- Country of Origin: China
Warranty and Support
For detailed warranty information, please refer to the Warranty (PDF) document provided with your product or available for download on the Amazon product page. For further assistance or support, please visit the Amazon Basics support page or contact customer service.
You can access the official User Manual (PDF) here.
For warranty details, please refer to the Warranty (PDF) here.
