Introduction
Thank you for choosing FURORA LIGHTING Pink Flameless LED Candles. This set provides a safe and elegant lighting solution for your home decor. Enjoy the gentle, flickering glow without the concerns of open flames, smoke, or melting wax. These candles are ideal for households with children and pets, offering peace of mind while enhancing your ambiance.
Image: Flameless candles offer a safe alternative for all environments.
What's Included
Your FURORA LIGHTING Flameless LED Candle set includes the following components:
- 4 x Pink Real Wax Flameless LED Pillar Candles (various sizes)
- 4 x Pink Real Wax Flameless LED Votive Candles
- 1 x Remote Control
- Batteries (1 x CR2025 for remote, 4 x CR2450 for votives, 12 x AAA for pillars)
Image: The complete set of 8 pink flameless candles and remote control.
Setup
Follow these steps to set up your flameless candles:
- Battery Installation (Pillar Candles): Each pillar candle requires 3 AAA batteries. Open the battery compartment cover at the bottom of the candle. Insert the batteries according to the polarity indicators (+/-). Close the cover securely.
- Battery Installation (Votive Candles): Each votive candle requires 1 CR2450 battery. Open the battery compartment cover at the bottom of the candle. Insert the battery according to the polarity indicators (+/-). Close the cover securely.
- Battery Installation (Remote Control): The remote control requires 1 CR2025 battery. Ensure the battery is correctly inserted.
- Initial Activation: For pillar candles, slide the ON/OFF switch at the bottom to the "ON" position. For votive candles, slide the ON/OFF switch at the bottom to the "ON" position.
- Placement: Place the candles in your desired locations. Ensure the remote control has a clear line of sight to the pillar candles for optimal operation. Note: Votive candles are typically operated manually via their bottom switch.
Image: Battery installation for both pillar and votive candles.
Operating Instructions
The pillar candles in this set can be controlled using the included remote. Votive candles are typically operated manually.
Remote Control Functions (for Pillar Candles)
- ON/OFF: Press the "ON" button to turn on the pillar candles. Press the "OFF" button to turn them off.
- Timer Settings: Press the 2H, 4H, 6H, or 8H button to activate the timer. The candles will stay on for the selected duration and then turn off automatically. The timer operates independently and does not repeat automatically.
- Mode: Press the "Candle" button for a realistic flickering flame effect. Press the "Light" button for a steady, constant glow.
- Brightness Adjustment: Use the "+" and "-" buttons to increase or decrease the brightness of the candles.
Manual Operation (for Votive Candles)
Slide the ON/OFF switch located at the bottom of each votive candle to turn it on or off.
Image: Remote control for easy operation of pillar candles.
Battery Information
Proper battery usage ensures optimal performance and safety.
- Pillar Candles: Each requires 3 x AAA batteries.
- Votive Candles: Each requires 1 x CR2450 battery.
- Remote Control: Requires 1 x CR2025 battery.
Important Notes:
- Always use new batteries of the specified type.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the product is not used for an extended period to prevent leakage.
- Dispose of used batteries responsibly according to local regulations.
Maintenance
To keep your flameless candles in excellent condition:
- Cleaning: Wipe the candles with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Storage: Store candles in a cool, dry place away from direct sunlight and heat sources when not in use. High temperatures can affect the wax material.
- Handling: Handle with care to avoid damaging the wax exterior.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pillar candles do not turn on with remote. | Dead or incorrectly inserted remote battery; remote out of range; candle switch off. | Replace remote battery (CR2025). Ensure remote has clear line of sight to candles. Check if the ON/OFF switch at the bottom of the pillar candle is in the "ON" position. |
| Votive candles do not turn on. | Dead or incorrectly inserted votive battery; votive switch off. | Replace votive battery (CR2450). Ensure the ON/OFF switch at the bottom of the votive candle is in the "ON" position. Note: Votive candles are typically not remote-controlled. |
| Candle light is dim or inconsistent. | Low batteries in the candle. | Replace all batteries in the affected candle with new ones. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | TY19N008 |
| Base Material | Real Wax |
| Shade Material | Plastic |
| Color | Pink |
| Lamp Type | LED |
| Light Source Type | LED |
| Switch Type | Remote (for pillars), Manual (for votives) |
| Controller Type | Remote Control (IR) |
| Number of Light Sources | 8 (4 pillars, 4 votives) |
| Voltage | 4.5 Volts |
| Product Dimensions | 10.24"D x 9.45"W x 3.31"H |
| Item Weight | 2.65 Pounds |
| Indoor Outdoor Usage | Indoor |
| Manufacturer | Tong Yune Industrial Co. |
Warranty and Support
FURORA LIGHTING is committed to providing quality products. If you have any questions, concerns, or require assistance with your flameless LED candles, please contact our customer support. We are always here to help ensure your satisfaction.
For support, please refer to the contact information provided with your purchase or visit the official FURORA LIGHTING website.