AUDEXEN 7 Inch LED Headlights Instruction Manual

1. Product Overview

The AUDEXEN 7 Inch LED Headlights are designed as a high-performance lighting solution for various Jeep Wrangler models. These headlights feature advanced LED technology for superior brightness and durability, ensuring enhanced visibility and safety on the road.

Key Features:

• Pro-Grade Performance: OEM-spec 7-inch LED headlight conversion kit with 30W@Low beam & 60W@High beam, offering 300% brighter output compared to standard 7-inch halogens.
• Durable Construction: Heavy-duty aluminum housing and anti-yellowing PC lens for long-lasting performance.
• DOT-Certified Safety: Road-legal headlights with water-proof IP67 rating and an 80,000-hour lifespan. Luminous flux: 3000LM@Low beam, 6000LM@High beam.
• Integrated EMC: Built-in EMC to prevent flicker issues.

Compatibility:

These 7 Inch LED headlights are compatible with:

• Jeep Wrangler JK JKU 2 & 4 Doors Models (2007-2018)
• Jeep Wrangler TJ (1997-2006)
• Jeep Wrangler LJ Unlimited (2004-2006)
• Direct replacement for #6014, 6015, 6016 & H6024 housings (Fits 98% of 7-inch round headlight housings).

2. What's in the Box

• 2x 7 Inch Round LED Headlights
• H4 to H13 Adapter Kit with Smart CANbus Decoder
• Wiring for Daytime Running Lights (DRL) / Halos

3. Specifications

Brand:

AUDEXEN

Model Number:

JGDD0708

Color:

Silver (Chrome)

Light Source Type:

LED

Wattage:

150 watts (30W@Low beam, 60W@High beam)

Luminous Flux:

3000LM@Low beam, 6000LM@High beam

Voltage:

12 Volts (DC)

Special Feature:

Waterproof (IP67 rating)

Lifespan:

80,000 hours

Lens Material:

Polymethylacrylate

Item Dimensions:

7 x 7 x 4.3 inches

Included Components:

2x 7 Inch Round Headlights

4. Safety Information

These headlights are DOT-Certified, ensuring they meet road-legal standards for safety and performance. Always ensure proper installation and alignment to prevent blinding other drivers.

5. Installation Guide

Installation typically takes approximately 25 minutes for most users with basic hand tools. A true plug-and-play design with a complete H4 to H13 adapter kit and smart CANbus decoder ensures no error codes.

Tools Required:

• T-15 Torx screwdriver or socket
• Flathead screwdriver (for body clips)
• Basic hand tools

Installation Steps:

1. Open Hood and Remove Grill: Pop the hood of your Jeep. Remove the body clips securing the top of the grill using a flathead screwdriver or pick tool. Gently pull the grill forward to detach it.
2. Remove Turn Signals: Disconnect the turn signal wiring from the grill.
3. Remove Factory Headlights: Each factory headlight is held in place by four Torx screws. Remove these screws using a T-15 Torx tool. Gently pull the headlight assembly forward.
4. Disconnect Headlight Harness: Push back on the red locking slider and press the green tab to disconnect the headlight harness.
5. Remove Metal Retainer Ring: Remove the metal retainer ring from the factory headlight. This will be reused.
6. Connect New Headlights: Attach the H4 to H13 adapter to your new LED headlight. Connect the other end of the adapter to the factory Jeep harness. Ensure the red safety latch is pushed back into place.
7. Wire DRL/Halos (Optional): The yellow wire from the new headlights is for the DRL/Halo function. You can tap this into your side marker lights or run it to a fuse box for constant power when the vehicle is on. Ensure connections are secure and insulated (e.g., with electrical tape).
8. Test Headlights: Before reassembling, turn on your Jeep's lights to test the DRL/Halos, low beams, and high beams.
9. Install New Headlights: Place the metal retainer ring onto the new LED headlight. Carefully position the new headlight into the housing and secure it with the four Torx screws.
10. Reattach Grill: Reconnect the turn signal wiring. Align the grill and push it back into place, securing it with the body clips.

Installation Visual Guide:

Figure 1: Headlight dimensions and key features like anti-aging PC lens and built-in EMC.

Figure 2: DOT approval markings and the aluminum alloy housing with a breathing hole for ventilation.

6. Operating Instructions

The AUDEXEN LED Headlights offer multiple lighting modes for various driving conditions.

Lighting Modes:

• Daytime Running Lights (DRL) / Halos: Provides a distinctive white halo ring for daytime visibility.
• Low Beam: Offers 30W of bright, focused light for regular driving.
• High Beam: Delivers 60W of powerful illumination for maximum visibility.

Figure 3: Visual representation of Daytime Running Lights (DRL), Low Beam, and High Beam modes.

7. Beam Adjustment

To adjust the perfect beam angle:

1. Park your Jeep on a level surface, approximately 5 meters away from a flat wall.
2. Adjust the horizontal and vertical alignment of the lights.
3. The 'Z' shape line of the beam should be 90cm in length.
4. The lights shining on the wall should be 80cm high.

8. Maintenance

The anti-yellowing PC lens helps maintain the headlights' new appearance over time. The IP67 waterproof rating ensures protection against water and dust.

Addressing Moisture/Condensation:

If moisture or condensation appears inside the headlight, please open the ventilation breathers on the back of the light when the headlight is on. The moisture will disappear within a short time, and the headlight will work normally again and be as bright as before. This practice can also help prolong the lifespan of the headlights.

9. Troubleshooting

Flicker Issue:

The headlights include a smart CANbus decoder to prevent flicker issues. If flickering occurs, ensure all connections are secure and the CANbus decoder is properly installed. In some rare cases, a defective unit might cause flickering, and contacting customer support is recommended.

10. Warranty and Support

The AUDEXEN 7 Inch LED Headlights come with a 1-year manufacturer warranty.

Customer Support:

For any issues or concerns with your product, please feel free to reach out to AUDEXEN via the Amazon message center. To do so, log in to your Amazon account, navigate to "Your orders," find the order ID, and click "Contact seller."