Finishing Touch Diamond
Finishing Touch Diamond Hair Remover Instruction Manual
Model: Diamond
Introduction
The Finishing Touch Diamond Deluxe Hair Remover is designed for efficient and gentle hair removal from various body parts, including the face, feet, hands, arms, neck, and armpits. It features micro-oscillating blades for a painless experience and includes a built-in light for enhanced visibility of fine hairs. This manual provides essential information for the safe and effective use of your device.
Image: Overview of the Finishing Touch Diamond Hair Remover, showing the main device, mirror, and various attachments.
Safety Information
Please read all safety instructions before using the device to ensure safe operation and prevent injury.
- Always keep the device away from water. Do not use while charging.
- Avoid contact with eyes and other sensitive areas.
- Clean the device after each use to prevent bacterial growth.
- Store the device properly in a dry, safe place.
- Always follow the instructions provided with the device to ensure safe and optimal operation.
Setup
1. Battery Installation
The Finishing Touch Diamond Hair Remover requires 1 AAA battery. Ensure the battery is inserted with the correct polarity as indicated inside the battery compartment.
2. Attaching Accessories
Your device comes with various accessories, including replacement heads, a cleaning brush, and comb attachments (2/4mm and 6mm).
- To attach a replacement head, align it with the device's main body and gently push until it clicks into place.
- For comb attachments, slide the desired comb (2/4mm or 6mm) over the trimmer head until it securely fits.
Image: Detailed view of the Diamond Edition accessories, including the cleaning brush, replacement heads, and comb attachments.
Operating Instructions
1. Powering On/Off
Locate the On/Off switch on the device. Slide the switch to the 'On' position to activate the trimmer and the built-in light. Slide it to 'Off' when finished.
2. Hair Removal Techniques
The device features a pivoting head that cuts around contours and hard-to-reach areas for a smooth finish.
- Tip #1: Pull skin taut for a cleaner cut.
- Tip #2: Hold the trimmer at a 45-degree angle to the skin.
- Tip #3: Trim in the opposite direction of hair growth for best results.
Image: Visual guide on using the pivoting head and tips for effective hair removal.
3. Using Comb Attachments
The two hair guards (2/4mm and 6mm) allow for trimming longer or shorter hairs, ideal for eyebrows and other facial hair.
- Attach the appropriate comb for your desired hair length.
- Gently glide the trimmer over the area to be treated.
Image: The device with a 6mm comb attachment, illustrating its use for facial hair and sensitive areas.
4. Built-in Light and Mirror
The device includes a built-in light on the trimmer head and a separate deluxe mirror with its own light to help you easily spot and remove even the finest hairs.
Image: The hair remover and the deluxe mirror, both illuminated, highlighting their utility for precision.
Maintenance
1. Cleaning the Device
To maintain hygiene and optimal performance, clean your device after each use.
- Turn off the device and remove any comb attachments.
- Use the provided cleaning brush to gently brush away any trapped hairs from the trimmer head.
- Do not rinse the device under water.
2. Storage
Store the device and its accessories in a dry, cool place, away from direct sunlight and moisture, to prolong its lifespan.
Troubleshooting
If you encounter issues with your Finishing Touch Diamond Hair Remover, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on or operates weakly. | Dead or low battery. Incorrect battery insertion. | Replace the AAA battery with a fresh one, ensuring correct polarity. |
| Built-in light does not work. | Battery issue. Faulty light component. | Check or replace the battery. If the problem persists, contact customer support. |
| Trimmer pulls hair or does not cut smoothly. | Hair buildup in blades. Dull blades. Incorrect usage angle. | Clean the trimmer head thoroughly with the brush. Ensure you are holding the device at a 45-degree angle and pulling skin taut. Consider replacing the trimmer head if blades are dull. |
Specifications
- Model Name: Diamond
- Brand: Finishing Touch
- Power Source: Battery Powered
- Battery Type: 1 AAA battery required
- Special Feature: Cordless, Built-in Light
- Recommended Uses: Nose Hair, Armpit, Face, Leg
- Package Dimensions: 5.98 x 4.84 x 1.81 inches
- Weight: 5 ounces
- ASIN: B07TV98K4Z
Warranty and Support
Specific warranty information for your Finishing Touch Diamond Hair Remover is typically provided with your purchase documentation or on the product packaging. Please refer to these materials for details regarding warranty coverage and duration.
For technical support, replacement parts, or further assistance, please contact the manufacturer, Finishing Touch, directly through their official website or customer service channels. Contact information can usually be found on the product packaging or their official website.