jomparis 12-Inch Silent Wall Clock Instruction Manual

1. Introduction

Thank you for choosing the jomparis 12-Inch Silent Wall Clock. This clock is designed for accurate timekeeping with a modern, minimalist aesthetic. Its non-ticking quartz movement ensures a quiet environment, making it suitable for various rooms in your home or office. This manual provides essential information for the proper setup, operation, and maintenance of your new wall clock.

Image 1: Front view of the jomparis 12-inch gray silent wall clock.

2. Safety Information

• Use only 1 AA battery (not included). Do not mix old and new batteries, or different types of batteries.
• Insert batteries with correct polarity (+ and -).
• Remove exhausted batteries promptly to prevent leakage and damage.
• Keep the clock away from extreme temperatures, direct sunlight, and high humidity.
• Do not attempt to disassemble or repair the clock yourself. Contact customer service for assistance.

3. Package Contents

Verify that all items are present in the package:

• 1 x jomparis 12-Inch Silent Wall Clock
• 1 x Wall Hook (for mounting)

4. Setup Instructions

4.1. Battery Installation

1. Locate the battery compartment on the back of the clock.
2. Insert one (1) AA battery into the compartment. Ensure the positive (+) end is inserted first, followed by the negative (-) end.
3. The clock hands will begin to move once the battery is correctly installed.

4.2. Mounting the Clock

1. Choose a suitable location on a wall for your clock.
2. Use the provided wall hook. Gently tap the small nails of the hook into the desired spot on the wall until it is secure.
3. Align the hanging slot on the back of the clock with the hook on the wall.
4. Carefully hang the clock, ensuring it is stable and level.

Image 2: Rear view of the clock, highlighting the battery compartment and hanging mechanism.

Video 1: Official jomparis video demonstrating the installation of the 12-inch wall clock, including battery placement and hanging.

5. Operating Instructions

5.1. Setting the Time

To set the correct time, locate the small adjustment wheel on the back of the clock's movement mechanism. Rotate this wheel clockwise or counter-clockwise until the hour and minute hands display the desired time. The second hand will move continuously without ticking.

Image 3: Side view of the clock, illustrating its slim profile and highlighting the silent operation feature.

6. Maintenance

6.1. Cleaning

Wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.

6.2. Battery Replacement

When the clock begins to lose time or stops functioning, it is time to replace the battery. Follow the battery installation steps in Section 4.1. The clock is designed for long battery life, typically requiring replacement only once every year or two.

7. Troubleshooting

7.1. Clock Not Running

• Ensure the AA battery is inserted correctly with the proper polarity.
• Replace the battery with a fresh one.
• Check if the hands are obstructed or touching each other. Gently adjust if necessary.

7.2. Incorrect Time

• Adjust the time using the adjustment wheel on the back of the clock.
• If the time consistently falls behind or runs fast, replace the battery.

8. Specifications

9. Warranty and Support

jomparis stands behind its products. This clock includes a one-year guarantee against defective parts. For any questions, concerns, or support needs, please contact jomparis customer service. Refer to your purchase documentation for specific contact details.