BEST DIRECT LAMPE24

Starlyf Sensor Light User Manual

Model: LAMPE24 | Brand: BEST DIRECT

Introduction

The BEST DIRECT Starlyf Sensor Light set provides convenient, motion-activated LED illumination for various areas of your home. Designed to be extra-flat and easy to install, these lights automatically turn on when motion is detected and turn off when no motion is present, ensuring light only when and where you need it. This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Starlyf Sensor Lights.

Package Contents

2 x Starlyf Sensor Lights
Double-sided adhesive pads (pre-attached or included separately)

Two Starlyf Sensor Lights, round and flat, with a white illuminated center and silver-grey outer ring.

This image displays the two Starlyf Sensor Lights included in the set. Each light is designed to be extra-flat and features a bright LED illumination with a motion sensor in the center.

Setup Instructions

1. Battery Installation

Locate the battery compartment cover on the back of the Starlyf Sensor Light.
Gently twist or slide the cover to open it.
Insert 3 x AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside.
Replace the battery compartment cover securely.

2. Mounting the Lights

The Starlyf Sensor Lights offer two convenient mounting options:

Magnetic Mounting: The lights feature a built-in magnet on the back, allowing them to be easily attached to any metal surface without additional tools.
Adhesive Mounting: For non-metal or non-porous surfaces, use the included double-sided adhesive pads. Peel off the protective film from one side of the pad and firmly press it onto the back of the light. Then, peel off the other side's film and press the light firmly onto your desired clean, dry surface.

Recommended Installation Locations:

Wardrobes and closets
Staircases and hallways
Cellars, attics, and garages
Under kitchen sinks or in pantries
Any dark area requiring temporary illumination

Starlyf Sensor Lights illuminating a wooden staircase as a person descends.

The Starlyf Sensor Lights provide automatic illumination for dark areas like staircases, enhancing safety and visibility. They activate upon detecting movement.

A Starlyf Sensor Light mounted inside a wardrobe, illuminating clothes hanging on a rail.

Ideal for dark spaces such as wardrobes, the Starlyf Sensor Light ensures that you can easily see your belongings without needing to manually switch on a light.

A Starlyf Sensor Light mounted inside a locker, with a person reaching for a towel.

These versatile lights can be placed in various compact spaces like lockers, providing instant light when needed, making it convenient to access items.

A Starlyf Sensor Light mounted under a kitchen sink, illuminating cleaning supplies.

Perfect for utility areas, the Starlyf Sensor Light illuminates hard-to-see spaces such as under sinks, making it easier to find and organize items.

Operating Instructions

The Starlyf Sensor Light is designed for fully automatic operation:

Motion Detection: The light will automatically turn on when it detects motion within approximately 3 meters (10 feet) of its sensor.
Automatic Shut-off: If no further motion is detected for approximately 30 seconds, the light will automatically turn off to conserve battery life.
Light Sensor: The integrated light sensor ensures that the light only activates in dark conditions, preventing unnecessary illumination during daylight hours.

This video demonstrates the automatic activation and deactivation of the Starlyf Sensor Light, showcasing its motion detection capabilities in various settings.

Maintenance

Cleaning: To clean the Starlyf Sensor Light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
Battery Replacement: When the light appears dim or stops activating, it is time to replace the batteries. Follow the "Battery Installation" steps in the Setup section to replace the 3 x AAA batteries.

Troubleshooting

Problem	Possible Cause	Solution
Light does not turn on.	Batteries are dead or incorrectly installed. No motion detected within range. Area is too bright (light sensor prevents activation).	Replace batteries, ensuring correct polarity. Move within 3 meters of the sensor. Test in a darker environment.
Light does not turn off.	Continuous motion detected. Sensor is obstructed or dirty.	Ensure no continuous movement in the detection zone. Clean the sensor area.
Light is dim.	Low battery power.	Replace batteries.

Specifications

Brand	BEST DIRECT
Model Reference	LAMPE24
Color	White/Grey
Material	Metal
Number of Lights	2
Voltage	3 Volts
Power Source	Battery Powered
Battery Type Required	3 x AAA (per light, not included)
Bulb Type	LED
Item Weight	150 g (per light)
Motion Detection Range	Approx. 3 meters (10 feet)
Auto-off Duration	Approx. 30 seconds (after no motion)
Country of Origin	China

Warranty and Support

Your Starlyf Sensor Light comes with a 2-year warranty from the date of purchase. For any product inquiries, technical assistance, or warranty claims, please contact the Best Direct Official seller customer service. Please retain your proof of purchase for warranty validation.

Customer Service: Refer to your purchase documentation or the seller's contact information on the platform where you purchased the product.