Introduction
This manual provides essential instructions for the proper use and care of your ReadyWired USB Cable, specifically designed for connecting Inateck BCST-10 barcode scanners and other compatible printers to a host device such as a computer. This cable ensures reliable data transfer and power supply for your peripheral devices.
An image showing the black ReadyWired USB cable. One end features a USB-A male connector, and the other end features a USB-B male connector, designed for connecting a barcode scanner or printer to a computer.
Product Features
- Compatibility: Guaranteed compatibility with Inateck BCST-10 barcode scanners and other devices requiring a USB-A to USB-B connection.
- Length: 6 feet (approximately 1.8 meters) for flexible device placement.
- Connector Type: USB-A Male to USB-B Male.
- Durable Design: Constructed for reliable and long-lasting performance.
Setup Instructions
- Identify Connectors: Locate the USB-A connector (rectangular) and the USB-B connector (square with two chamfered corners) on the cable.
- Connect to Host Device: Insert the USB-A male connector into an available USB-A port on your computer or host device. Ensure it is fully seated.
- Connect to Peripheral Device: Insert the USB-B male connector into the corresponding USB-B port on your Inateck BCST-10 barcode scanner or compatible printer. Ensure it is fully seated.
- Power On Devices: Once both ends of the cable are securely connected, power on your host device and the peripheral device (scanner/printer).
- Driver Installation (if necessary): Your operating system may automatically detect and install necessary drivers. If not, refer to the instruction manual of your barcode scanner or printer for driver installation procedures.
Operating the Cable
The ReadyWired USB Cable functions as a passive data and power conduit. Once properly connected, it facilitates communication between your host device and the peripheral. No specific operational steps are required for the cable itself beyond ensuring a secure connection.
- Ensure both devices are powered on for the connection to be active.
- Avoid bending or twisting the cable excessively during use to prevent internal damage.
- For optimal performance, use the cable within its specified length and avoid using additional unpowered USB hubs if possible, which might affect power delivery or data integrity.
Maintenance and Care
- Cleaning: Gently wipe the cable and connectors with a dry, soft cloth to remove dust or debris. Do not use liquid cleaners directly on the connectors.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, not the cable itself, to prevent strain on the connection points.
- Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the insulation or connectors. Discontinue use if damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not recognized by computer. |
|
|
| Intermittent connection or data transfer errors. |
|
|
| Device not powering on via USB. |
|
|
Specifications
| Brand | ReadyWired |
| Model Number | BCST-10 (Compatible) |
| Connector Type | USB-A Male to USB-B Male |
| Cable Type | USB 2.0 |
| Compatible Devices | Inateck BCST-10 Barcode Scanner, Printers, and other devices with a USB-B port |
| Color | Black |
| Length | 6 feet (approx. 1.8 meters) |
| Maximum Voltage | 5 Volts |
| Product Dimensions | 8 x 4 x 1 inches (packaging) |
| Item Weight | 8 ounces |
| UPC | 305978367538 |
Warranty Information
ReadyWired products are typically covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ReadyWired customer support directly. Keep your proof of purchase for warranty claims.
Customer Support
If you encounter any issues or have questions regarding your ReadyWired USB Cable that are not addressed in this manual, please contact ReadyWired customer support. Contact information can usually be found on the product packaging or the official ReadyWired website.