CLP Dublin Work Stool Instruction Manual

1. Introduction

Thank you for choosing the CLP Dublin Work Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new work stool. Please read these instructions carefully before use and retain them for future reference.

Image 1: The CLP Dublin Work Stool, red fabric, in a modern home office environment.

2. Safety Instructions

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the chair on a soft, clean surface to prevent scratches.
• Do not stand on the chair. Use it only for sitting.
• Do not exceed the maximum weight recommendation of 115 kg (253 lbs).
• Keep children away from the chair during assembly. Small parts can be a choking hazard.
• Regularly check all screws and connections to ensure they are tight. Retighten if necessary.
• Avoid exposing the chair to direct sunlight or extreme temperatures to prevent material degradation.

3. Package Contents

Please verify that all the following components are included in your package:

• 1x Seat with backrest and armrests (pre-assembled upholstery)
• 1x Gas lift cylinder
• 1x Star base (chrome-effect metal)
• 5x Casters (wheels)
• 1x Mechanism plate (for height adjustment)
• Hardware pack (screws, washers, Allen key)

4. Setup and Assembly

Follow these steps to assemble your CLP Dublin Work Stool:

1. Attach Casters to Base: Insert each of the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
2. Insert Gas Lift: Place the gas lift cylinder into the central hole of the assembled star base. Ensure it sits securely.
3. Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat. Ensure the lever for height adjustment is facing the front of the seat. Secure it with the provided screws and tighten them using the Allen key.
4. Connect Seat to Gas Lift: Carefully place the assembled seat (with the mechanism plate) onto the top of the gas lift cylinder. The tapered end of the gas lift should fit into the central hole of the mechanism plate. Press down firmly to secure the connection.

Image 2: Rear view of the work stool, illustrating the assembled gas lift and star base with casters, ready for the seat attachment.

Your work stool is now assembled. Test its stability before full use.

5. Operating Instructions

Height Adjustment

To adjust the seat height:

• To raise the seat: While standing, pull the lever located under the right side of the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
• To lower the seat: While seated, pull the lever located under the right side of the seat upwards. The seat will lower under your body weight. Release the lever when the desired height is reached.

Movement

The five smooth-gliding casters allow for easy movement across various floor types, including hard floors and carpets. Simply push the chair to move it.

6. Maintenance

Proper care will extend the life of your CLP Dublin Work Stool:

• Cleaning the Fabric: Lightly wipe dirt with a damp cotton cloth. For cleaning, we recommend using only soapy water and a soft cloth. Do not use household detergents, abrasive cleaners, or strong chemicals, as these can damage the fabric.
• Cleaning the Metal Base: Wipe with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly.
• Regular Checks: Periodically check all screws and connections for tightness. Retighten as needed to maintain stability and safety.

7. Troubleshooting

8. Specifications

Image 3: Detailed dimensions of the CLP Dublin Work Stool, including overall height, width, depth, seat height, and backrest height.

• Brand: CLP
• Model Number: 308255
• Color: Red
• Material: Polyester (fabric), Metal (frame)
• Overall Dimensions (W x D x H): 62 cm x 55 cm x 78-90 cm (approx. 24.4 x 21.7 x 30.7-35.4 inches)
• Seat Height: 45-57 cm (approx. 17.7-22.4 inches)
• Seat Dimensions (W x D): 48 x 45 cm (approx. 18.9 x 17.7 inches)
• Backrest Height: 34 cm (approx. 13.4 inches)
• Armrest Height: 20 cm (approx. 7.9 inches)
• Item Weight: 11 kg (approx. 24.3 lbs)
• Maximum Weight Recommendation: 115 kg (approx. 253 lbs)
• Special Features: Armrest, Ergonomic, Swivel, Padded, Casters

9. Warranty and Support

CLP stands behind the quality of its products. For specific warranty information, please refer to the documentation included with your purchase or contact your retailer. For technical support or inquiries regarding replacement parts, please contact CLP customer service through their official website or the contact information provided by your point of purchase.

Note: Information on spare parts availability is not provided in the product details.