AMZCHEF Professional Slow Juicer

Introduction

Thank you for choosing the AMZCHEF Professional Slow Juicer. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read all instructions carefully before first use and retain this manual for future reference.

Image: The AMZCHEF Professional Slow Juicer in action, demonstrating its ability to extract juice from fruits. The juicer is silver-grey with clear plastic components, and a glass of fresh orange juice is being filled from its spout. A whole pineapple and sliced oranges are visible on a blue plate beside the juicer.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before operating the juicer.
• Do not immerse the motor base in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Always ensure the juicer is properly assembled before operation.
• Do not put fingers or other objects into the feed chute while the appliance is in operation. If food becomes lodged in the opening, use the food pusher provided.
• This appliance is for household use only.

Product Components

Familiarize yourself with the parts of your AMZCHEF Slow Juicer:

• Feed Chute: Features a 76mm (3in) large opening for whole fruits and a 40mm (1.57in) small opening for vegetables and strip-shaped ingredients.
• Juicing Lid: Secures the components during operation.
• Auger: The spiral component that slowly presses ingredients.
• Filter: Stainless steel filter with 0.2mm dense holes for efficient pulp separation.
• Juicing Bowl: Collects the juice and separates pulp.
• Motor Base: Contains the quiet motor and control panel.
• Pulp Container: Collects discarded pulp.
• Juice Jug: Collects extracted juice.
• Cleaning Brush: For easy cleaning of components.

Image: A detailed view of key components including the dual-size feeder chute, the fine mesh filter made of 304 stainless steel, and the control panel featuring an easy-to-use switch with a "Reverse" function to prevent clogging. This image highlights the practical design and features of the juicer.

Setup and Assembly

Follow these four simple steps to assemble your juicer before use:

1. Install Juicing Bowl: Align the red mark on the juicing bowl with the silver mark on the motor base. Place the juicing bowl onto the motor base, ensuring the convex part of the base matches the concave part of the bowl.
2. Install Filter: Align the red mark on the filter to the red mark on the juicing bowl. Then, place the filter into the juicing bowl. The red mark of the bowl should align with the red mark of the filter.
3. Install Auger: Add force to push and rotate the auger at the same time into the juicer. Ensure to push in at the same time and make sure the auger is pushed to the bottom of the bowl.
4. Install Juicing Lid: Align the "unlocked" mark on the lid to the red mark on the juicing bowl. Then place the lid on the installed bowl. Rotate the "lock" mark on the lid to the red mark on the juicing bowl to secure it.

Important: Before installing the juicer, please close the black rubber stopper which is in the bottom of the juicing bowl. This prevents juice leak.

Image: A step-by-step visual guide illustrating the assembly process of the AMZCHEF Slow Juicer. Each step shows a close-up of the components being correctly aligned and fitted, from the juicing bowl to the final locking of the lid, emphasizing the simplicity of the installation.

Operating Instructions

Once assembled, your AMZCHEF Slow Juicer is ready for use. Follow these guidelines for optimal juicing:

• Preparation: Wash all fruits and vegetables thoroughly. Cut ingredients into pieces that fit comfortably into the feed chute. For fibrous vegetables like celery, cut into smaller, narrower strips.
• Placement: Place the juice jug under the juice spout and the pulp container under the pulp spout.
• Power On: Plug the juicer into a grounded electrical outlet. Use the control button to turn the juicer on.
• Feeding Ingredients: Slowly feed ingredients into the appropriate feed chute. Use the food pusher only if necessary to guide ingredients down. Do not force ingredients.
• Two Speeds: The juicer features two speeds. Use the appropriate speed setting for different types of produce.
• Reverse Function: If ingredients become jammed, switch the juicer to the "Reverse" (R) setting for a few seconds to clear the blockage, then switch back to the "On" setting.
• Quiet Operation: The juicer operates at less than 60 decibels, ensuring a quiet juicing experience.
• Juice Yield: The unique 9-segment spiral auger helps achieve a high juice rate, extracting up to 95% of juice and leaving drier pulp.

Image: An illustrative diagram showcasing the 9-segment spiral auger, highlighting its efficient juice extraction process. The image emphasizes a 90% high juice yield, slower speed (60RPM) to protect fiber, and prevention of oxidation, resulting in more nutritious juice.

Image: This image visually represents the quiet operation of the AMZCHEF Slow Juicer, showing a baby sleeping undisturbed next to the running appliance. Text overlays indicate "40-60DBS Quiet Operation" and "Low-Decibel Motor Less than 60 decibels," emphasizing a comfortable and pleasant juicing experience.

Cleaning and Maintenance

Proper cleaning and maintenance will extend the life of your juicer and ensure hygienic operation:

• Immediate Cleaning: Clean the juicer immediately after each use to prevent pulp from drying and sticking to parts.
• Disassembly: Unplug the juicer from the power outlet. Disassemble all removable parts (lid, auger, filter, juicing bowl, pulp container, juice jug).
• Washing: Wash all removable parts under running water using the provided cleaning brush. The cleaning brush is especially useful for cleaning the fine mesh of the filter.
• Dishwasher Safety: The removable parts are NOT dishwasher safe. Hand wash only.
• Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.
• Drying and Storage: Dry all parts thoroughly before reassembling or storing. Store the juicer in a clean, dry place.

Image: A detailed view of the juicer's filter, emphasizing its 0.2mm dense holes designed for efficient pulp separation and its construction from food-grade 304 stainless steel. The image also mentions that a special brush is included to facilitate easy cleaning of the filter.

Troubleshooting

If you encounter issues with your juicer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

Specifications

• Brand: AMZCHEF
• Model Name: Juicers
• Item Model Number: Juicers 388
• Power: 150 Watts
• Voltage: 110 Volts
• Number of Speeds: 2
• Noise Level: ≤60dB
• Auger Speed: 56 RPM
• Feed Chute Size: 76mm (3in) large, 40mm (1.57in) small
• Blade Material: Stainless Steel
• Product Dimensions: 8.5 x 15 x 18 inches
• Item Weight: 10.53 pounds
• Color: Grey
• Product Care: Hand Wash Only (removable parts)
• UPC: 741663306220

Warranty and Support

AMZCHEF provides a 2-year product warranty for this Slow Juicer. This warranty covers defects in materials and workmanship under normal use.

For any questions, concerns, or warranty claims, please contact AMZCHEF customer service. We aim to provide a quick response within 24 hours.

Contact Information:

• Website: Visit the AMZCHEF Store on Amazon
• Email: (Please refer to product packaging or official website for specific email address)
• Phone: (Please refer to product packaging or official website for specific phone number)

Please have your model number (Juicers 388) and purchase date ready when contacting support.