Introduction
The Surebonder CL-195F is a versatile high-temperature mini hot glue gun designed for detailed crafting and various DIY projects. It offers both cordless and corded operation, providing flexibility for different tasks. The fine tip ensures precise glue placement, making it ideal for intricate work. This manual provides essential information for safe and effective use of your new glue gun.
Figure 1: Surebonder CL-195F Mini Hot Glue Gun on its charging stand.
Safety Information
- Always operate the glue gun on a stable, heat-resistant surface.
- Do not touch the hot nozzle or melted glue. The tip and glue can reach high temperatures and cause burns.
- Keep out of reach of children. Adult supervision is required when children are using the tool.
- Never leave the glue gun unattended while it is powered on or heating.
- Ensure the power cord is not damaged and is kept away from hot surfaces.
- Use only mini glue sticks compatible with high-temperature glue guns.
- Unplug the glue gun when not in use or before cleaning.
Package Contents
Verify that all items are present in your package:
- Surebonder CL-195F Mini Hot Glue Gun
- Heating Base/Stand with built-in Glue Pad
- 5 ft. Power Cord (for base or direct gun connection)
Setup
1. Powering the Unit
The Surebonder CL-195F can be used in two modes: cordless or corded.
Cordless Operation Setup:
- Connect the 5 ft. power cord to the heating base/stand.
- Plug the power cord into a standard 120V electrical outlet.
- Place the glue gun onto the heating base. Ensure the contacts on the gun align with the contacts on the base for proper charging and heating.
Figure 2: Cordless operation by lifting the glue gun from its base.
Corded Operation Setup:
- For continuous use, the power cord can be plugged directly into the port at the bottom of the glue gun's handle.
- Plug the other end of the power cord into a standard 120V electrical outlet.
Figure 3: Corded operation with the power cord plugged directly into the glue gun.
2. Inserting Glue Sticks
Insert a mini hot glue stick (0.28 inch / 7mm diameter) into the circular opening at the back of the glue gun. Push it gently until it stops. Do not force the glue stick.
Operating Instructions
1. Power On
Locate the ON/OFF switch on the side of the glue gun. Slide the switch to the 'ON' position. A power indicator light will illuminate, indicating the gun is heating.
Figure 4: Power indicator light and ON/OFF switch location.
2. Heating Time
Allow the glue gun to heat up for approximately 3-5 minutes. The high-temperature setting ensures a strong, long-lasting bond.
3. Cordless Use (Intermittent)
Once heated, lift the glue gun off the heating stand. It can be used cordless for up to 2 minutes. For longer cordless periods, return the gun to the heating stand periodically to maintain temperature and reheat.
4. Dispensing Glue
Gently squeeze the trigger to dispense melted glue from the fine tip nozzle. The fine tip allows for precise application, making it suitable for detailed work. Apply glue to one surface and press the surfaces together within 15-30 seconds for optimal adhesion.
Figure 5: Key features and components of the glue gun.
5. Power Off
When finished, slide the ON/OFF switch to the 'OFF' position. If using the heating stand, place the gun back on the stand. Unplug the power cord from the outlet.
Maintenance
Cleaning the Nozzle:
Allow the glue gun to cool completely. Gently wipe any excess dried glue from the nozzle with a dry cloth. Do not use water or cleaning solvents on the hot nozzle.
Cleaning the Glue Pad:
The heating base features a built-in silicone glue pad designed to catch drips. Once glue has dried on the pad, it can be easily peeled off. This helps keep your workspace clean.
Figure 6: The non-stick glue pad on the heating stand.
Storage:
Store the glue gun and its stand in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the gun is completely cool before storing.
Troubleshooting
- Glue not flowing: Ensure the glue gun is fully heated. Check if the glue stick is properly inserted and if there's enough glue stick remaining to be fed.
- Gun not heating: Verify that the power cord is securely plugged into both the outlet and the heating base/gun. Check if the ON/OFF switch is in the 'ON' position and the power indicator light is on.
- Gun not staying hot in cordless mode: The cordless operation is designed for intermittent use (up to 2 minutes off the base). Return the gun to the heating stand frequently to maintain optimal temperature.
- Stand instability: Ensure the stand is placed on a flat, stable surface. The stand is designed to be sturdy and prevent tipping.
Specifications
| Specification | Detail |
|---|---|
| Model Number | CL-195F |
| Power Source | Corded Electric |
| Wattage | 20 watts |
| Voltage | 120 Volts |
| Item Weight | 0.55 Pounds (approx. 8.8 ounces) |
| Product Dimensions (L x W x H) | 8.25" x 3.5" x 10.6" |
| Compatible Material | Fabric, Glass, Metal, Wood |
| Glue Stick Size | Mini (0.28 inch / 7mm diameter) |
Warranty and Support
This Surebonder product is covered by a 90-Day Manufacturer Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or product inquiries, please contact Surebonder customer service. Refer to the product packaging or the official Surebonder website for the most current contact information.
Please retain your proof of purchase for warranty validation.
