Marksman 2063

Marksman 2063 Air Rifle Instruction Manual

Model: 2063

1. Introduction

Thank you for purchasing the Marksman 2063 Air Rifle. This manual provides essential information for the safe and proper use, maintenance, and storage of your air rifle. Please read this manual thoroughly before operating the air rifle and retain it for future reference. This air rifle is designed for recreational shooting and target practice. It features a .177 caliber, synthetic stock, and comes with a 4x32 scope and mounts.

2. Safety Information

WARNING: Misuse or careless use may cause serious injury or death. Always follow these safety rules:

3. Product Overview

The Marksman 2063 is a spring-piston air rifle designed for accuracy and durability. It features a synthetic stock, a rifled steel barrel, and an adjustable rear sight. The included 4x32 scope enhances aiming precision.

Marksman 2063 Air Rifle with mounted 4x32 scope

Image 1: The Marksman 2063 Air Rifle, showcasing its synthetic stock and the pre-mounted 4x32 scope.

4. Setup

4.1 Unpacking and Inspection

Carefully remove all components from the packaging. Inspect the air rifle for any signs of damage. Ensure all included components are present:

Marksman 2063 Air Rifle packaging showing features

Image 2: The Marksman 2063 Air Rifle packaging, highlighting key features such as rifled steel barrel, grooved receiver, synthetic stock, and fiber optic sights.

4.2 Scope Mounting (if not pre-mounted)

If your scope is not already mounted, follow these steps:

  1. Loosen the screws on the scope mounts.
  2. Place the scope mounts onto the dovetail grooves on top of the air rifle receiver.
  3. Position the scope within the mounts, ensuring proper eye relief (distance from your eye to the scope eyepiece).
  4. Tighten the mount screws evenly, but do not overtighten, to secure the scope.
  5. Adjust the scope for windage and elevation as needed during initial firing.

5. Operating Instructions

5.1 Loading the Air Rifle

Always ensure the safety is engaged before loading.

  1. Point the air rifle in a safe direction.
  2. Grasp the barrel and firmly pull it downwards until it locks into the cocked position. This action compresses the spring and engages the automatic safety.
  3. Insert one .177 caliber pellet into the breech, ensuring the skirt of the pellet is fully seated.
  4. Return the barrel to its original position, ensuring it locks securely.

5.2 Firing the Air Rifle

Only fire when you are ready to shoot and your target is clear.

  1. With the air rifle loaded and pointed at your target, disengage the safety.
  2. Align your sights (or scope reticle) with the target.
  3. Place your finger on the trigger and apply steady pressure until the air rifle fires.
  4. After firing, immediately engage the safety.

6. Maintenance

Regular maintenance ensures the longevity and performance of your Marksman 2063 Air Rifle.

7. Troubleshooting

Refer to the table below for common issues and their solutions.

ProblemPossible CauseSolution
Pellet does not fireAir rifle not fully cocked; Safety engaged; Faulty pellet.Ensure barrel is fully cocked until it locks; Disengage safety; Try a new pellet.
Low power/inconsistent velocityWorn breech seal; Incorrect pellet size; Spring fatigue.Inspect and replace breech seal; Use correct .177 caliber pellets; Contact service for spring replacement.
Poor accuracyLoose scope/sights; Dirty barrel; Inconsistent hold; Damaged pellet.Check and tighten scope mounts/sights; Clean barrel; Practice consistent shooting technique; Use undamaged, quality pellets.
Barrel difficult to cockLack of lubrication; Obstruction.Apply air gun oil to pivot points; Check for obstructions in the cocking mechanism.

8. Specifications

Detailed specifications for the Marksman 2063 Air Rifle:

FeatureDetail
Model Name2063
BrandMarksman
Caliber.177 (5mm)
Air Gun Power TypeSpring Piston (Electric is incorrect, based on typical air rifle mechanisms and other specs)
Barrel Material TypeAlloy Steel (Rifled)
Frame MaterialPlastic (Synthetic Stock)
Included ComponentsAir Rifle, 4x32 Scope, Scope Mounts
Rounds Capacity1 (Single Shot)
UPC026785020637
ManufacturerS/R Industries, Inc.

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: S/R Industries, Inc.

Please visit the official Marksman website or contact their customer service for the most up-to-date support information.

Related Documents - 2063

Preview Marksman M11RF-LCD Two-Way Communication LCD Transmitter User Manual
Comprehensive user manual for the Marksman M11RF-LCD two-way communication LCD transmitter. Learn about system operation, battery replacement, transmitter functions, LED indicators, and remote start features.
Preview Tangent Theta TT735P Rifle Telescope User Manual and Specifications
Comprehensive user manual and technical specifications for the Tangent Theta TT735P 7-35x56mm Rifle Telescope. Learn about operation, maintenance, zeroing, and warranty service.
Preview MARKSMAN Hidden Deck Fastening System: Tools and Installation Guide
Comprehensive guide to CAMO MARKSMAN tools for achieving a fastener-free deck surface. Learn about MARKSMAN PRO, PRO-X1, PRO-NB, and EDGE models, setup, and installation procedures for secure and aesthetic deck construction.
Preview Midmark M9/M9D & M11 PC Board Kit Installation Guide
This guide provides step-by-step instructions for installing and configuring the PC Board Kit for Midmark M9, M9D, and M11 sterilizers. It covers board removal, installation, unit configuration, and serial number setup.
Preview Subsite MARKSMAN+ Quick Start Guide: HDD Guidance System Setup
Comprehensive quick start guide for the Subsite MARKSMAN+ HDD Guidance System. Learn how to power on, navigate menus, perform bore path analysis, calibrate beacons, run noise floor analysis, and safely power down the system.
Preview CAMO Deck Fastening Resources: Edge & Clip Installation Guides
Comprehensive guide to CAMO deck fastening systems, covering edge fastening techniques, best practices, board recommendations, and clip installation for various deck materials.