1. Introduction
This user manual provides comprehensive instructions for the safe and effective operation and maintenance of your LcFun Electric Lighter, Model LES-115. This device is designed for reliable ignition in various conditions, featuring a windproof dual arc and a waterproof casing. Please read this manual thoroughly before first use and retain it for future reference.

2. Safety Information
WARNING: Failure to follow these safety instructions may result in fire, electric shock, or other injury.
- Keep out of reach of children.
- Do not use with metal products or allow metal objects to contact the arc electrodes.
- Do not touch the arc electrodes while the lighter is active.
- Do not expose to temperatures above 50°C (122°F).
- Do not puncture or incinerate the lighter.
- Avoid prolonged exposure to direct sunlight.
- Ensure the lighter is fully closed and latched when not in use, especially in wet environments.
- Do not attempt to disassemble or modify the lighter.
- Use only the provided USB cable or a certified equivalent for charging.
3. Package Contents
- 1 x LcFun Electric Lighter (Model LES-115)
- 1 x USB Charging Cable
- 1 x Paracord Lanyard
- 1 x User Manual

4. Product Overview
The LcFun Electric Lighter features a robust design suitable for outdoor use. Key components include:
- Dual Arc Electrodes: Generate a powerful, windproof plasma arc for ignition.
- Ignition Button: Activates the dual arc.
- Metal-Ring Sealed Cover: Provides IP56 waterproof protection when closed.
- Locking Clasp: Secures the cover for waterproof integrity.
- USB Charging Port: Located under a protective flap for recharging.
- Lanyard Attachment Point: For securing the included paracord lanyard.



5. Setup
5.1 Initial Charge
Before first use, fully charge the lighter. The lighter is powered by a rechargeable lithium battery and requires approximately 1 hour for a full charge.
- Locate the USB charging port, typically found under a protective rubber flap on the side of the lighter.
- Open the protective flap.
- Connect the provided USB charging cable to the lighter's port.
- Connect the other end of the USB cable to a compatible USB power source (e.g., computer, wall adapter 5V/1A, power bank, car charger).
- A charging indicator light will illuminate during charging and turn off when fully charged.
- Once fully charged, disconnect the cable and securely close the protective flap to maintain waterproof integrity.

5.2 Attaching the Lanyard
The included paracord lanyard can be attached to the designated attachment point on the lighter for convenient carrying and to prevent loss.
6. Operating Instructions
6.1 Basic Operation
- Open the metal-ring sealed cover by releasing the locking clasp.
- Press and hold the ignition button. The dual plasma arc will activate between the electrodes.
- Bring the item to be ignited (e.g., candle wick, paper, kindling) into contact with the plasma arc.
- Release the ignition button to deactivate the arc. The lighter features a 7-second auto power-off for safety.
- Close the cover and secure the locking clasp after use to maintain waterproof protection.

6.2 Waterproof Feature (IP56)
The lighter is designed with an IP56 waterproof rating. This means it is protected against dust ingress and powerful water jets. For optimal waterproof performance, ensure the cover is fully closed and the locking clasp is securely fastened before exposing the lighter to water or moisture.

7. Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior of the lighter. Do not use abrasive cleaners or solvents. For the electrodes, gently brush away any residue with a small, non-metallic brush if necessary.
- Charging: Recharge the lighter when the battery indicator suggests low power. Regular charging helps maintain battery health.
- Storage: Store the lighter in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cover is closed and latched.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lighter does not ignite. | Low battery. Cover not fully open. Electrodes obstructed. | Charge the lighter fully. Ensure the cover is fully open and the ignition button is pressed. Clean electrodes of any debris. |
| Charging indicator does not light up. | Cable not connected properly. Faulty USB cable or power source. | Ensure USB cable is securely connected to both lighter and power source. Try a different USB cable or power source. |
| Arc is weak or inconsistent. | Low battery. Electrodes are dirty. | Recharge the lighter. Gently clean the electrodes. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | LcFun |
| Model Number | LES-115 |
| Material | Zinc, ABS |
| Ignition Type | Electric Dual Arc Plasma |
| Fuel Type | Electric (Rechargeable Lithium Battery) |
| Charging Time | Approximately 1 hour |
| Waterproof Rating | IP56 |
| Dimensions (L x W x Th) | 2.7" x 0.47" x 1.87" (6.86 cm x 1.19 cm x 4.75 cm) |
| Item Weight | 1.55 ounces (43.94 grams) |
| Safety Features | Overheating Protection, Short-circuit Protection, Overload Protection, Certificated Safe Battery, 7s Auto Power Off, Overcharging Protection |



10. Warranty and Support
LcFun provides a 60-day guarantee for this product. If you encounter any issues or have questions regarding your LcFun Electric Lighter, please contact LcFun customer service for assistance. They are committed to providing a perfect solution as soon as possible.
For further support, you may visit the official LcFun store: LcFun Store on Amazon.