Introduction
This manual provides essential information for the installation, operation, and maintenance of your Puig PHB19 Swingarm Protector. Designed to protect your motorcycle's swingarm and suspension, this accessory also enhances the aesthetic appeal with its racing-inspired design.
Compatibility: This product is compatible with the following Yamaha models:
- Yamaha MT-09 (2017, 2018, 2019, 2020)
- Yamaha MT-09 SP (2018, 2019, 2020)
Product Features
- Enhanced Protection: Safeguards the motorcycle's swingarm and suspension from impacts and abrasions.
- Durable Construction: Machined from a robust nylon block for high resistance and reduced weight.
- Lightweight Design: Weighs approximately 265 grams, minimizing added mass to your motorcycle.
- Dimensions: Measures 40 mm in length and 50 mm in diameter.
- Sporty Aesthetic: Features a racing-inspired design to complement your motorcycle's appearance.
- Customization Options: Includes black swingarm caps. Optional anodized rings (Ref. 20025) are available separately in various colors for personalization.
Setup and Installation
Installation of the Puig PHB19 Swingarm Protector is designed to be straightforward. It is recommended that installation be performed by a qualified technician or an experienced individual with appropriate tools.
- Preparation: Ensure your motorcycle is stable and securely supported on a stand. Gather all necessary tools, which typically include wrenches or hex keys compatible with your motorcycle's swingarm bolts.
- Identify Mounting Point: Locate the swingarm axle or mounting points on your motorcycle where the protector will be attached.
- Position the Protector: Carefully align the Puig PHB19 Swingarm Protector with the designated mounting area.
- Secure the Protector: Attach the protector using the provided hardware. Ensure all bolts are tightened to the manufacturer's recommended torque specifications. Do not overtighten.
- Final Check: After installation, visually inspect the protector to ensure it is securely fastened and does not interfere with any moving parts of the motorcycle, such as the chain, wheel, or brake system.
Image: Puig PHB19 Swingarm Protector (Model 20116N) shown installed on a motorcycle swingarm. This image illustrates the protector's position and appearance once mounted.
For detailed, model-specific instructions, please refer to your motorcycle's service manual or consult a professional.
Operating Information
The Puig PHB19 Swingarm Protector is a passive safety and aesthetic component. Once correctly installed, it requires no active operation. Its function is to provide protection to the swingarm and suspension components during potential impacts or slides, and to enhance the motorcycle's visual appeal.
Ensure the protector remains securely attached and free from damage during regular use.
Maintenance
Regular maintenance ensures the longevity and effectiveness of your swingarm protector.
- Cleaning: Clean the protector regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the nylon material or its finish.
- Inspection: Periodically inspect the protector for any signs of damage, cracks, or loosening. Check the mounting bolts to ensure they remain tight.
- Damage Assessment: In the event of a fall or impact, thoroughly inspect the swingarm protector and the surrounding motorcycle components for damage. Replace the protector if it shows significant wear or structural compromise to ensure continued protection.
Troubleshooting
Most issues related to the swingarm protector are minor and can be resolved with simple checks.
| Problem | Possible Cause | Solution |
|---|---|---|
| Protector feels loose | Mounting bolts are not sufficiently tightened. | Carefully tighten the mounting bolts. Do not overtighten. If loosening persists, inspect threads for damage. |
| Unusual noise from protector area | Protector is loose or interfering with other components. | Check for proper installation and clearance from moving parts. Ensure all bolts are secure. |
| Visible damage (cracks, deep scratches) | Impact or abrasion during use. | For significant damage, replace the protector to maintain optimal protection. Minor cosmetic scratches may not affect function. |
If you encounter issues not listed here or require further assistance, please contact Puig customer support or a certified motorcycle mechanic.
Specifications
| Model Number | 20116N |
| Brand | Puig |
| Material | Nylon |
| Component Weight (Nylon Block) | Approximately 265 grams (0.58 lbs) |
| Component Dimensions (Length x Diameter) | 40 mm x 50 mm (1.57 in x 1.97 in) |
| Packaged Product Dimensions (L x W x H) | 46 x 7.4 x 5.7 cm (18.11 x 2.91 x 2.24 inches) |
| Packaged Product Weight | 317.51 grams (0.70 lbs) |
| Part Position | Rear (Swingarm) |
| Compatible Models | Yamaha MT-09 (2017-2020), Yamaha MT-09 SP (2018-2020) |
Warranty and Support
For information regarding product warranty, please refer to the official Puig website or contact your authorized Puig dealer. Warranty terms and conditions may vary by region and retailer.
For technical support, installation queries, or parts replacement, please contact Puig customer service directly. Ensure you have your product model number (20116N) and purchase details available when seeking support.
Puig Official Website: www.puig.tv