Product Overview
The BaBylissPRO FOILFX cordless shaver is a professional compact-size metal electric foil shaver with a gold hypoallergenic double-foil system for an extra-close shave. It includes a storage pouch, cleaning brush, and charging cord.
Key Benefits
- Hypoallergenic double-foil system
- Powerful high-speed motor
- Cordless with up to 3-hour runtime
- Auto shutoff
Initial Setup and Charging
Before first use, fully charge your BaBylissPRO METALFX Double Foil Shaver. Connect the charging cord to the shaver and a power outlet. The indicator light will show charging status.
Ensure the shaver is turned off before charging. A full charge typically takes approximately 3 hours.
Operating Instructions
For optimal results, hold the shaver at a right angle against the skin. Move it slowly against the direction of hair growth. Avoid applying excessive pressure to prevent damage to the foils and skin irritation.
Shaving Tips
- For best results, use on short stubble. If hair is longer than 1/32 inch, pre-trim with a clipper.
- Ensure skin is clean and dry before shaving.
- Use gentle, even strokes.
Maintenance
Daily Cleaning
- After each use, turn off the shaver and remove the foil head by pressing the release button on the side.
- Gently tap out any loose hair from the foil head and the shaver body.
- Use the provided cleaning brush to remove remaining hair particles from the foils and cutters.
- Do not wash the shaver body with water, as it contains electronics. The foil head can be rinsed under water.
- Ensure all parts are dry before reassembling.
Foil and Cutter Replacement
For continued optimal performance, it is recommended to replace the foil head and cutters periodically, typically every 12-18 months, depending on usage.
- Ensure the shaver is off and remove the old foil head by pressing the release button and lifting it off.
- Carefully pull the old cutting blades up and away from the shaver's drive shafts.
- Align the new cutting blades with the drive shafts, ensuring the silver bar in the middle of the cutter aligns with the slit in the drive shaft, and push down until they snap into place.
- Place the new foil head onto the shaver and press down until it clicks securely into place.
- Turn on the shaver briefly to confirm proper installation and function.
Troubleshooting Common Issues
- Shaver not turning on: Ensure the shaver is fully charged. Check the charging cable connection. If the issue persists, the battery may need replacement.
- Poor shaving performance: Clean the foil head and cutters thoroughly. Replace the foil head and cutters if they are dull or damaged. Ensure hair is short stubble before shaving.
- Skin irritation: Ensure you are not applying too much pressure. Shave against the grain gently. Clean the shaver regularly to prevent bacterial buildup. Allow skin to adapt if you are new to electric shaving.
- Unusual noise: Check if the foil head is properly seated. Ensure no foreign objects are lodged in the cutting mechanism. If the noise persists, contact customer support.
Product Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 3.25 x 5.25 x 8.5 inches; 1.33 Pounds |
| Item Model Number | FXFS2G |
| UPC | 074108402448 |
| Brand | BaBylissPRO |
| Power Source | Battery Powered |
| Special Feature | Hypoallergenic double-foil system |
| Recommended Uses | Face, Neck, Head |
| Runtime | Up to 3 hours |
Warranty Information and Customer Support
BaBylissPRO products are manufactured to the highest standards and undergo rigorous quality control. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your product packaging for specific terms and conditions.
For technical assistance, replacement parts, or warranty claims, please visit the official BaBylissPRO website or contact their customer support line. Keep your proof of purchase for warranty validation.
Official BaBylissPRO Website: www.babylisspro.com