MUKIKIM Hyper Runner Stunt - Blue Instruction Manual

Introduction

Welcome to the MUKIKIM Hyper Runner Stunt - Blue remote control car instruction manual. This guide provides essential information for setting up, operating, and maintaining your new high-speed stunt vehicle. Please read this manual thoroughly before first use to ensure safe and optimal performance.

Image: The Hyper Runner Stunt Blue RC car, its remote controller, and the product packaging. The car is shown in various dynamic poses, highlighting its stunt capabilities.

What's in the Box

Upon opening the package, verify that all components are present:

• One (1) Hyper Runner Stunt Blue Four-Wheeler
• One (1) Remote Controller
• One (1) USB Charging Cable
• One (1) Instruction Manual (this document)

Component Overview

Hyper Runner Stunt Car

Image: A detailed view of the Hyper Runner Stunt car, highlighting its "Terrain Toughness Wheel" and "Rolling Control Lever". An inset shows the "Power Switch/Charging Socket".

• Terrain Toughness Wheels: Oversized wheels designed for various surfaces.
• Rolling Control Lever: Allows for 360-degree rotation and stunt maneuvers.
• Power Switch/Charging Socket: Located on the underside of the vehicle for power control and USB charging.
• Colorful Power Light: Integrated lights for visual effects during operation.

Remote Controller

Image: The remote controller for the Hyper Runner Stunt car, clearly labeling the "Demo Button" and "Left/Right Turn Trimmer", along with the USB charging core.

• Left Joystick: Controls forward and backward movement.
• Right Joystick: Controls turning left and right.
• Demo Button: Activates an automatic demonstration of various stunts and rotations.
• Left/Right Turn Trimmer: Adjusts the car's steering for straight-line driving.
• Power Switch: Turns the controller on or off.
• Battery Compartment: Located on the back for AAA batteries.

Setup and Charging

Charging the Car Battery

1. Locate the USB charging socket on the underside of the Hyper Runner Stunt car.
2. Connect the small end of the provided USB charging cable to the car's charging socket.
3. Connect the USB end of the cable to a standard USB power adapter (not included) or a computer's USB port.
4. The car's battery requires approximately 15 minutes of charging time for 10 minutes of operation.
5. Disconnect the charging cable once charging is complete.

Installing Controller Batteries

1. Locate the battery compartment on the back of the remote controller.
2. Open the battery compartment cover.
3. Insert two (2) 1.5V "AAA" batteries (not included), ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Operating Instructions

Pairing the Controller and Car

1. Ensure both the car and controller are fully charged/have fresh batteries.
2. Turn on the power switch on the Hyper Runner Stunt car.
3. Turn on the power switch on the remote controller.
4. The car and controller should automatically pair. If not, turn both off and on again.
5. For multiple cars, pair each car and controller separately to avoid interference (2.4 GHz wireless range allows this).

Basic Controls

• Forward/Backward: Push the left joystick forward or backward.
• Turn Left/Right: Push the right joystick left or right.
• Adjust Steering: Use the Left/Right Turn Trimmer on the controller to fine-tune the car's straight-line movement if it veers.

Performing Stunts

Image: The Hyper Runner Stunt car in dynamic motion, illustrating its ability to perform high-speed stunts, including 360-degree spins and double-sided running, indicated by motion blur effects.

• 360-Degree Flip: Experiment with rapid changes in direction and speed using both joysticks to initiate flips. The car's design allows it to continue running even after flipping.
• Double-Sided Running: The car is designed to operate on either side, allowing for continuous play even after overturning.
• Demo Mode: Press the "Demo" button on the controller to activate an automatic sequence of rotations and turnovers. Press it again to stop the demonstration.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the car and controller. Avoid using water or cleaning solvents, as they can damage electronic components.
• Storage: When not in use, store the Hyper Runner Stunt car and controller in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: Remove batteries from the controller if it will not be used for an extended period to prevent leakage. Fully charge the car's battery before long-term storage.

Troubleshooting

• Car not responding:
  • Ensure both the car and controller are powered on.
  • Check if the car's battery is charged.
  • Check if the controller batteries are correctly installed and have sufficient power.
  • Re-pair the car and controller by turning both off and on again.
• Car not driving straight:
  • Adjust the Left/Right Turn Trimmer on the remote controller until the car drives straight.
• Limited range or interference:
  • Ensure there are no large metal objects or other 2.4 GHz devices nearby that could cause interference.
  • Operate the car within the recommended range of the controller.

Specifications

Safety Information

WARNING: CHOKING HAZARD - Small Parts. Not for children under 3 years.

• Always supervise children during play.
• Do not operate the vehicle near people, pets, or fragile objects.
• Avoid operating in wet conditions or on uneven terrain that could cause damage.
• Do not modify or disassemble the product.
• Use only the provided USB charging cable for the car.
• Do not mix old and new batteries, or different types of batteries in the controller.

Warranty and Support

For product support, warranty information, or to purchase replacement parts, please contact MUKIKIM customer service directly. Refer to the packaging or the official MUKIKIM website for the most current contact details.

You can visit the official MUKIKIM store on Amazon for more products and information: MUKIKIM Store