Introduction
Thank you for choosing the IFOLAINA Crystal LED Light Base. This manual provides essential information for the safe and effective use of your new light base. This device is designed to illuminate 3D crystal photos, glass art, figurines, and other decorative items with a vibrant, automatically changing multicolor LED display. Please read these instructions carefully before use and retain them for future reference.
Product Overview
Figure 1: IFOLAINA Crystal LED Light Base (Octagon Flat Top)
The IFOLAINA Crystal LED Light Base features an octagonal, flat top design, ideal for displaying various crystal and glass items. It provides an automatic color-changing light sequence to enhance the visual appeal of your display pieces. The unit is wired for continuous power and does not rotate.
Setup Instructions
- Unpack the Device: Carefully remove the light base from its packaging. Inspect for any signs of damage.
- Position the Base: Place the light base on a stable, flat surface where you intend to display your item.
- Connect Power: Insert the small end of the provided USB power cord into the 'Power Supply' port on the side of the light base.
- Power Source: Connect the USB end of the power cord to a compatible USB power source (e.g., a computer USB port, a car USB charger, or a USB power bank). Note: A USB wall adapter (plug) is not included.
- Place Display Item: Carefully place your 3D crystal, glass art, or figurine onto the flat top surface of the light base. Ensure it is centered and stable.
Figure 2: Power Switch and Power Supply Port
Operating Instructions
- Turn On/Off: Locate the power switch on the side of the light base (refer to Figure 2). Flip the switch to the 'ON' position to activate the LED lights. Flip it to 'OFF' to turn off the lights.
- Automatic Color Changing: The light base is designed to automatically cycle through multiple colors. The colors will flash and transition automatically; there is no option to pause on a single color or adjust the speed of the transitions.
- Non-Rotating Feature: This model does not feature a rotating top surface. The display item will remain stationary.
- Flat Top Design: The top surface is flat and is not designed to securely hold spherical items like crystal balls without additional support.
Video 1: Demonstration of the automatic multicolor changing feature of the IFOLAINA Crystal LED Light Base.
Maintenance
- Cleaning: To clean the light base, ensure it is unplugged from the power source. Use a soft, dry cloth to gently wipe the surface. Do not use abrasive cleaners or harsh chemicals, as these may damage the finish.
- Storage: When not in use, store the light base in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light base does not turn on. | No power supply or loose connection. | Ensure the USB power cord is securely connected to both the light base and a working USB power source. Check if the power source is active. |
| Lights are dim or flickering. | Insufficient power or faulty connection. | Try a different USB power source or cable. Ensure connections are firm. |
Specifications
- Model: Octagon - Flat Top
- Shape: Octagonal
- Material: Crystal
- Color: White (Base)
- Light Type: Multicolor LED (Automatic Flashing)
- Dimensions (L x W x H): 2.95 x 2.95 x 1.57 inches (76mm x 76mm x 40mm)
- Power Supply: Wired via USB Power Cord (Plug not included)
- Load Capacity: 12 Pounds
- Rotation: No
Figure 3: Product Dimensions
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact the seller directly through the platform where the purchase was made. Keep your purchase receipt as proof of purchase.
Usage Examples
Figure 4: Various items displayed on the light base.
Figure 5: Crystal lotus flower illuminated.
Figure 6: 3D crystal mushroom figurine illuminated.