Introduction
The Perytong Sleep Headphones are a versatile 3-in-1 device, combining wireless sleep headphones, a Bluetooth sleep mask, and a Bluetooth sports headband. Designed for comfort and convenience, these headphones feature ultra-thin HD stereo speakers, making them ideal for sleeping, workouts, jogging, yoga, air travel, and meditation. The soft, breathable material ensures comfort for extended wear, including for side sleepers.
Image: The Perytong Sleep Headphones headband in grey, showcasing its integrated control panel and thin speakers. It is depicted being worn by individuals sleeping and exercising, highlighting its dual functionality.
Setup and Pairing
Follow these steps to connect your Perytong Sleep Headphones to your device via Bluetooth:
- Ensure Bluetooth is disabled on any previously paired devices to avoid interference.
- Press and hold the 'On/Off' button on the control module for approximately 5 seconds until the red and blue indicator lights begin to flash alternately. This indicates the headphones are in pairing mode.
- On your smartphone, tablet, or other Bluetooth-enabled device, open the Bluetooth settings.
- Search for available devices and select 'BT-FAAH' from the list.
- Once connected, the indicator light will turn solid blue, and you can begin enjoying audio.
Note: If you wish to pair a second device, first disconnect the headphones from the currently paired device.
Image: A close-up of the Perytong headband next to a smartphone displaying its Bluetooth settings, showing 'BT-FAAH' as a connected device. This illustrates the wireless connectivity feature.
Operating Instructions
The Perytong Sleep Headphones are designed for intuitive operation. The control module, located on the front of the headband, allows you to manage your audio playback and calls.
- Power On/Off: Press and hold the 'On/Off' button.
- Play/Pause: Press the 'Play/Pause' button once.
- Volume Up: Press the '+' button. Long press to increase volume continuously.
- Volume Down: Press the '-' button. Long press to decrease volume continuously.
- Next Track: Long press the '+' button (or specific button depending on model).
- Previous Track: Long press the '-' button (or specific button depending on model).
- Answer/End Call: Press the 'Play/Pause' button once during an incoming call.
- Reject Call: Press and hold the 'Play/Pause' button during an incoming call.
The headphones feature Bluetooth 5.2 technology, ensuring a stable connection and clear, lossless audio. The built-in rechargeable lithium battery provides over 10 hours of play time on a single charge, making it suitable for extended use.
Image: A visual representation of the Perytong headband with an overlay indicating "10H Play Time" and a battery charging icon, emphasizing its long battery life and fast charging capability.
Maintenance
To ensure the longevity and hygiene of your Perytong Sleep Headphones, the fabric headband is washable. It is crucial to remove the electronic components before washing.
Washing Instructions:
- Locate the control module and speakers inside the headband.
- Carefully push the right speaker towards the control module's position.
- Similarly, push the left speaker towards the control module's position.
- Gently push both speakers and the Bluetooth control module out from the fabric liner, which is separated from the stitching.
- Once all electronic components are removed, the fabric headband can be machine washed or hand washed.
- Allow the headband to air dry completely before reinserting the electronic components.
Image: A four-panel diagram illustrating the process of removing the speakers and control module from the Perytong headband before washing, and then showing the headband being machine washed.
Troubleshooting
If you encounter issues with your Perytong Sleep Headphones, refer to the following common solutions:
- Cannot Power On or Connect:
- Ensure the battery is fully charged. Do not attempt to power on or connect while charging. Disconnect from the charger before attempting to connect.
- Check the USB charging cable for damage if charging issues persist.
- No Sound or Low Volume:
- Adjust the volume from your mobile device.
- Long press the Volume Up (+) button on the headphone control module.
- Sound has Noise/Interference:
- Environmental interference can cause slight noise. Try moving to a different location.
- Speakers Not Fixed/Adjustable:
- The speakers are designed to be adjustable within the headband to fit your head size and ear position for optimal comfort. Reposition them as needed.
- Battery Life Shorter Than Expected:
- Ensure the device is fully charged before each use.
- Avoid using the headphones while charging.
Specifications
| Model Number | PTL01 |
| Bluetooth Version | 5.2 |
| Battery Life | Up to 10 Hours |
| Charging Time | 2 - 2.5 Hours |
| Control Type | Volume Control, Touch |
| Material | Durable braided cord with breathable mesh lining |
| Item Weight | 80 Grams |
| Product Dimensions | 26 x 10 x 1.2 cm |
| Special Features | Built-in microphone, Noise Cancellation, Stereo Sound, Washable, Comfortable for side sleepers |
Warranty and Support
Perytong provides a 24-month worry-free warranty for this item when purchased in new condition. Our dedicated Customer Service Team is available to provide friendly service and quick resolution for any issues you may encounter.
If your sleep headphones are malfunctioning, please contact our customer service for a free replacement or a refund. We are committed to ensuring your satisfaction with our products.
